Package: rat
Version: 4.2.22-2.3
Severity: wishlist
This is the patch I used for todays NMU of rat.
This is the diffstat:
Makefile.in | 13
config.guess | 1102 +++++++++-----------------------
config.sub | 724 ++-------------------
configure | 2
debian/changelog | 16
debian/compat | 2
debian/control | 10
debian/patches/00list | 1
debian/patches/04-rat-4.2.22-2.2.dpatch | 80 ++
debian/rules | 13
debian/source/format | 1
11 files changed, 543 insertions(+), 1421 deletions(-)
--
Happy hacking
Petter Reinholdtsen
diff --git a/debian/changelog b/debian/changelog
index 8c61006..562358c 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,19 @@
+rat (4.2.22-2.3) unstable; urgency=low
+
+ * Non-maintainer upload to fix RC problem.
+ * Changed from debhelper 4 to 9 (Closes: #817648).
+ * Moved upstream code changes to 04-rat-4.2.22-2.2.dpatch and switch
+ to 3.0 quilt source format.
+ * Revert config.guess and config.sub in source to originals and
+ replace them during build instead (Closes: #740652). Patch from
+ Logan Rosen and Ubuntu.
+ * Move homepage URL from description to d/control field.
+ * Updated Standards-Version from 3.7.2 to 3.9.8.
+ * Added ${misc:Depends} to dependency list.
+ * Restructure d/rules to fix problems discovered by lintian.
+
+ -- Petter Reinholdtsen <[email protected]> Sat, 24 Dec 2016 11:23:29 +0100
+
rat (4.2.22-2.2) unstable; urgency=low
* Non-maintainer upload.
diff --git a/debian/compat b/debian/compat
index b8626c4..ec63514 100644
--- a/debian/compat
+++ b/debian/compat
@@ -1 +1 @@
-4
+9
diff --git a/debian/control b/debian/control
index d35e0c1..e2cf269 100644
--- a/debian/control
+++ b/debian/control
@@ -1,13 +1,14 @@
Source: rat
-Build-Depends: tk-dev, libuclmmbase1-dev (>= 1.2.11-2), debhelper (>> 3.0.0), patch, libsm-dev, libice-dev, libx11-dev, libxext-dev
+Build-Depends: tk-dev, libuclmmbase1-dev (>= 1.2.11-2), debhelper (>= 9~), patch, libsm-dev, libice-dev, libx11-dev, libxext-dev, autotools-dev
Section: net
Priority: extra
Maintainer: David MartÃnez Moreno <[email protected]>
-Standards-Version: 3.7.2
+Standards-Version: 3.9.8
+Homepage: http://www-mice.cs.ucl.ac.uk/multimedia/software/rat/
Package: rat
Architecture: any
-Depends: ${shlibs:Depends}
+Depends: ${misc:Depends}, ${shlibs:Depends}
Suggests: sdr
Description: Unicast and multicast voice-over-IP application
RAT is a network audio tool that allows users to participate in audio
@@ -19,6 +20,3 @@ Description: Unicast and multicast voice-over-IP application
IETF standards, using RTP above UDP/IP as its transport protocol, and
conforming to the RTP profile for audio and video conferences with minimal
control.
- .
- Further information is available on the WWW, at:
- http://www-mice.cs.ucl.ac.uk/multimedia/software/rat/index.html
diff --git a/debian/patches/00list b/debian/patches/00list
index 5026bc0..5a056ea 100644
--- a/debian/patches/00list
+++ b/debian/patches/00list
@@ -1,3 +1,4 @@
01-rat-manpage-fix
02a-fixed-path
03-rat-media-version
+04-rat-4.2.22-2.2
diff --git a/debian/patches/04-rat-4.2.22-2.2.dpatch b/debian/patches/04-rat-4.2.22-2.2.dpatch
new file mode 100755
index 0000000..c4f828f
--- /dev/null
+++ b/debian/patches/04-rat-4.2.22-2.2.dpatch
@@ -0,0 +1,80 @@
+#! /bin/sh -e
+## 04-rat-4.2.22-2.2.dpatch
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Fix for rat-media showing current version in rat-media command line.
+##
+
+if [ $# -ne 1 ]; then
+ echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+ exit 1
+fi
+case "$1" in
+ -patch) patch -f --no-backup-if-mismatch -p1 < $0;;
+ -unpatch) patch -f --no-backup-if-mismatch -R -p1 < $0;;
+ *)
+ echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+ exit 1;;
+esac
+
+exit 0
+
+Description: Patches found in rat version 4.2.22-2.2
+Forwarded: no
+Reviewed-By: Petter Reinholdtsen <[email protected]>
+Last-Update: 2016-12-24
+
+--- rat-4.2.22.orig/Makefile.in
++++ rat-4.2.22/Makefile.in
+@@ -29,7 +29,6 @@ X_CFLAGS = @X_CFLAGS@
+ X_LIB = @X_PRE_LIBS@ @X_LIBS@ -lX11 -lXext @X_EXTRA_LIBS@
+ COMMON_LIB = @COMMON_LIB@
+ EXTRA_OBJ = @EXTRA_OBJ@
+-EXTERNAL_DEP = @EXTERNAL_DEP@
+
+ G728_CODEC_OBJ = @G728_CODEC_OBJ@
+ G728_LIB = @G728_LIB@
+@@ -85,7 +84,7 @@ ALL_SRCS = $(ALL_OBJS:%.o=%.c)
+
+ INSTALL_OBJS = ui_installer.o installer.o binaries.o
+
+-all: version.h sdr2.plugin.S02.audio.rtp.-.$(RATVER) $(RATVER).spec $(RATVER) $(RATVER)-ui $(RATVER)-media rat Makefile
++all: version.h sdr2.plugin.S02.audio.rtp.-.$(RATVER) $(RATVER) $(RATVER)-ui $(RATVER)-media rat Makefile
+
+ libuclaudio.a: $(AUDIO_OBJS)
+ $(AR) r $@ $(AUDIO_OBJS)
+@@ -99,7 +98,7 @@ libuclsndfile.a: $(SNDFILE_OBJS)
+ $(AR) r $@ $(SNDFILE_OBJS)
+ $(RANLIB) $@
+
+-$(RATVER)-media: $(CHANNEL_OBJS) $(TOY_OBJS) $(MEDIA_OBJS) $(MEDIALIBS) $(EXTERNAL_DEP)
++$(RATVER)-media: $(CHANNEL_OBJS) $(TOY_OBJS) $(MEDIA_OBJS) $(MEDIALIBS)
+ $(CC) $(CFLAGS) $(CHANNEL_OBJS) $(TOY_OBJS) $(MEDIA_OBJS) $(MEDIALIBS) $(COMMON_LIB) $(AU_LIB) $(LIBS) $(G728_LIB) -o $(RATVER)-media
+
+ $(RATVER)-ui: $(TCL_OBJS) $(UI_OBJS) $(EXTERNAL_DEP)
+@@ -162,10 +161,10 @@ distclean: clean
+ -rm -rf core core-$(RATVER)-media core-$(RATVER)-ui
+
+ install: all
+- ./install-sh -m 555 -c rat $(bindir)
+- ./install-sh -m 555 -c $(RATVER) $(bindir)
+- ./install-sh -m 555 -c $(RATVER)-media $(bindir)
+- ./install-sh -m 555 -c $(RATVER)-ui $(bindir)
++# ./install-sh -m 555 -c rat $(bindir)
++ ./install-sh -m 555 -c $(RATVER) $(bindir)/rat
++ ./install-sh -m 555 -c $(RATVER)-media $(bindir)/rat-media
++ ./install-sh -m 555 -c $(RATVER)-ui $(bindir)/rat-ui
+ ./install-sh -m 444 -c man/man1/rat.1 $(mandir)/man1/rat.1
+ ./install-sh -m 444 -c sdr2.plugin.S02.audio.rtp.-.$(RATVER) $(prefix)/etc/sdr/plugins
+
+--- rat-4.2.22.orig/configure
++++ rat-4.2.22/configure
+@@ -1421,7 +1421,7 @@ fi
+ #------------------------------------------------------------------------------
+ if test "$GCC" = yes
+ then
+- CFLAGS="$CFLAGS -W -Wall -Wbad-function-cast -Wmissing-prototypes -Werror"
++ CFLAGS="$CFLAGS -W -Wall -Wbad-function-cast -Wmissing-prototypes"
+ fi
+
+ #-----------------------------------------------------------------------------
diff --git a/debian/rules b/debian/rules
index b4b0bd8..7d3a40f 100755
--- a/debian/rules
+++ b/debian/rules
@@ -26,6 +26,7 @@ config: patch config-stamp
config-stamp:
dh_testdir
+ dh_autotools-dev_updateconfig
./configure --enable-ipv6 \
--with-tcl=/usr/include/tcl \
--with-tk=/usr/include/tcl \
@@ -47,7 +48,8 @@ clean1:
dh_testdir
dh_testroot
rm -f build-stamp config-stamp patch-stamp
- -$(MAKE) distclean
+ if [ -e Makefile ] ; then $(MAKE) distclean; fi
+ dh_autotools-dev_restoreconfig
dh_clean
patch: patch-stamp
@@ -103,25 +105,24 @@ install: build
$(MAKE) install prefix=$(CURDIR)/debian/tmp/usr
dh_movefiles
+build-indep binary-indep: build
-binary-indep: build
-
-binary-arch: build install
+build-arch binary-arch: build install
dh_testdir
dh_testroot
dh_installdocs
# dh_installmenu
- dh_installmanpages
+ dh_installman
# dh_undocumented rat-ui.1 rat-media.1
dh_installchangelogs
dh_fixperms
dh_strip
dh_compress
dh_fixperms
+ dh_makeshlibs
dh_installdeb
dh_shlibdeps
dh_gencontrol
- dh_makeshlibs
dh_md5sums
dh_builddeb
diff --git a/debian/source/format b/debian/source/format
new file mode 100644
index 0000000..163aaf8
--- /dev/null
+++ b/debian/source/format
@@ -0,0 +1 @@
+3.0 (quilt)
diff --git a/Makefile.in b/Makefile.in
index 60b36c1..bf561c2 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -29,6 +29,7 @@ X_CFLAGS = @X_CFLAGS@
X_LIB = @X_PRE_LIBS@ @X_LIBS@ -lX11 -lXext @X_EXTRA_LIBS@
COMMON_LIB = @COMMON_LIB@
EXTRA_OBJ = @EXTRA_OBJ@
+EXTERNAL_DEP = @EXTERNAL_DEP@
G728_CODEC_OBJ = @G728_CODEC_OBJ@
G728_LIB = @G728_LIB@
@@ -84,7 +85,7 @@ ALL_SRCS = $(ALL_OBJS:%.o=%.c)
INSTALL_OBJS = ui_installer.o installer.o binaries.o
-all: version.h sdr2.plugin.S02.audio.rtp.-.$(RATVER) $(RATVER) $(RATVER)-ui $(RATVER)-media rat Makefile
+all: version.h sdr2.plugin.S02.audio.rtp.-.$(RATVER) $(RATVER).spec $(RATVER) $(RATVER)-ui $(RATVER)-media rat Makefile
libuclaudio.a: $(AUDIO_OBJS)
$(AR) r $@ $(AUDIO_OBJS)
@@ -98,7 +99,7 @@ libuclsndfile.a: $(SNDFILE_OBJS)
$(AR) r $@ $(SNDFILE_OBJS)
$(RANLIB) $@
-$(RATVER)-media: $(CHANNEL_OBJS) $(TOY_OBJS) $(MEDIA_OBJS) $(MEDIALIBS)
+$(RATVER)-media: $(CHANNEL_OBJS) $(TOY_OBJS) $(MEDIA_OBJS) $(MEDIALIBS) $(EXTERNAL_DEP)
$(CC) $(CFLAGS) $(CHANNEL_OBJS) $(TOY_OBJS) $(MEDIA_OBJS) $(MEDIALIBS) $(COMMON_LIB) $(AU_LIB) $(LIBS) $(G728_LIB) -o $(RATVER)-media
$(RATVER)-ui: $(TCL_OBJS) $(UI_OBJS) $(EXTERNAL_DEP)
@@ -161,10 +162,10 @@ distclean: clean
-rm -rf core core-$(RATVER)-media core-$(RATVER)-ui
install: all
-# ./install-sh -m 555 -c rat $(bindir)
- ./install-sh -m 555 -c $(RATVER) $(bindir)/rat
- ./install-sh -m 555 -c $(RATVER)-media $(bindir)/rat-media
- ./install-sh -m 555 -c $(RATVER)-ui $(bindir)/rat-ui
+ ./install-sh -m 555 -c rat $(bindir)
+ ./install-sh -m 555 -c $(RATVER) $(bindir)
+ ./install-sh -m 555 -c $(RATVER)-media $(bindir)
+ ./install-sh -m 555 -c $(RATVER)-ui $(bindir)
./install-sh -m 444 -c man/man1/rat.1 $(mandir)/man1/rat.1
./install-sh -m 444 -c sdr2.plugin.S02.audio.rtp.-.$(RATVER) $(prefix)/etc/sdr/plugins
diff --git a/configure b/configure
index 1b65bdd..07ae06b 100755
--- a/configure
+++ b/configure
@@ -1421,7 +1421,7 @@ fi
#------------------------------------------------------------------------------
if test "$GCC" = yes
then
- CFLAGS="$CFLAGS -W -Wall -Wbad-function-cast -Wmissing-prototypes"
+ CFLAGS="$CFLAGS -W -Wall -Wbad-function-cast -Wmissing-prototypes -Werror"
fi
#-----------------------------------------------------------------------------
diff --git a/config.guess b/config.guess
index 78f6b92..2960d6e 100755
--- a/config.guess
+++ b/config.guess
@@ -1,10 +1,7 @@
#! /bin/sh
# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-
-timestamp='2003-01-10'
-
+# Copyright (C) 1992, 93, 94, 95, 96, 97, 1998 Free Software Foundation, Inc.
+#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
@@ -24,220 +21,36 @@ timestamp='2003-01-10'
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
-# Originally written by Per Bothner <[email protected]>.
-# Please send patches to <[email protected]>. Submit a context
-# diff and a properly formatted ChangeLog entry.
+# Written by Per Bothner <[email protected]>.
+# The master version of this file is at the FSF in /home/gd/gnu/lib.
#
# This script attempts to guess a canonical system name similar to
# config.sub. If it succeeds, it prints the system name on stdout, and
# exits with 0. Otherwise, it exits with 1.
#
# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <[email protected]>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
- --version | -v )
- echo "$version" ; exit 0 ;;
- --help | --h* | -h )
- echo "$usage"; exit 0 ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
- for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ;'
+# don't specify an explicit system type (host/target name).
+#
+# Only a few systems have been added to this list; please add others
+# (but try to keep the structure clean).
+#
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# ([email protected] 1994-08-24)
+# ([email protected] 8/24/94.)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
PATH=$PATH:/.attbin ; export PATH
fi
UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
+
# Note: order is significant - the case branches are not exclusive.
case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
- armeb) machine=armeb-unknown ;;
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- # Debian GNU/NetBSD machines have a different userland, and
- # thus, need a distinct triplet. However, they do not need
- # kernel version information, so it can be replaced with a
- # suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
- Debian*)
- release='-gnu'
- ;;
- *)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- ;;
- esac
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit 0 ;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- macppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvmeppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- pmax:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mipseb-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- wgrisc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- *:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- *:MicroBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-microbsd${UNAME_RELEASE}
- exit 0 ;;
alpha:OSF1:*:*)
if test $UNAME_RELEASE = "V4.0"; then
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
@@ -246,91 +59,90 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
- eval $set_cc_for_build
- cat <<EOF >$dummy.s
- .data
-\$Lformat:
- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
-
- .text
+ cat <<EOF >dummy.s
.globl main
- .align 4
.ent main
main:
- .frame \$30,16,\$26,0
- ldgp \$29,0(\$27)
- .prologue 1
- .long 0x47e03d80 # implver \$0
- lda \$2,-1
- .long 0x47e20c21 # amask \$2,\$1
- lda \$16,\$Lformat
- mov \$0,\$17
- not \$1,\$18
- jsr \$26,printf
- ldgp \$29,0(\$26)
- mov 0,\$16
- jsr \$26,exit
+ .frame \$30,0,\$26,0
+ .prologue 0
+ .long 0x47e03d80 # implver $0
+ lda \$2,259
+ .long 0x47e20c21 # amask $2,$1
+ srl \$1,8,\$2
+ sll \$2,2,\$2
+ sll \$0,3,\$0
+ addl \$1,\$0,\$0
+ addl \$2,\$0,\$0
+ ret \$31,(\$26),1
.end main
EOF
- $CC_FOR_BUILD -o $dummy $dummy.s 2>/dev/null
+ ${CC-cc} dummy.s -o dummy 2>/dev/null
if test "$?" = 0 ; then
- case `$dummy` in
- 0-0)
+ ./dummy
+ case "$?" in
+ 7)
UNAME_MACHINE="alpha"
;;
- 1-0)
+ 15)
UNAME_MACHINE="alphaev5"
;;
- 1-1)
+ 14)
UNAME_MACHINE="alphaev56"
;;
- 1-101)
+ 10)
UNAME_MACHINE="alphapca56"
;;
- 2-303)
+ 16)
UNAME_MACHINE="alphaev6"
;;
- 2-307)
- UNAME_MACHINE="alphaev67"
- ;;
- 2-1307)
- UNAME_MACHINE="alphaev68"
- ;;
- 3-1307)
- UNAME_MACHINE="alphaev7"
- ;;
esac
fi
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit 0 ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
+ rm -f dummy.s dummy
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]`
exit 0 ;;
21064:Windows_NT:50:3)
echo alpha-dec-winnt3.5
exit 0 ;;
Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
+ echo m68k-cbm-sysv4
exit 0;;
+ amiga:NetBSD:*:*)
+ echo m68k-cbm-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ amiga:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
*:[Aa]miga[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-amigaos
exit 0 ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
+ arc64:OpenBSD:*:*)
+ echo mips64el-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
+ arc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ hkmips:OpenBSD:*:*)
+ echo mips-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ pmax:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sgi:OpenBSD:*:*)
+ echo mips-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ wgrisc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
exit 0;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ arm32:NetBSD:*:*)
+ echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ exit 0 ;;
+ SR2?01:HI-UX/MPP:*:*)
echo hppa1.1-hitachi-hiuxmpp
exit 0;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ Pyramid*:OSx*:*:*|MIS*:OSx*:*:*|MIS*:SMP_DC-OSx*:*:*)
# [email protected] (Earle F. Ake) contributed MIS and NILE.
if test "`(/bin/universe) 2>/dev/null`" = att ; then
echo pyramid-pyramid-sysv3
@@ -338,13 +150,9 @@ EOF
echo pyramid-pyramid-bsd
fi
exit 0 ;;
- NILE*:*:*:dcosx)
+ NILE:*:*:dcosx)
echo pyramid-pyramid-svr4
exit 0 ;;
- DRS?6000:UNIX_SV:4.2*:7*)
- case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7 && exit 0 ;;
- esac ;;
sun4H:SunOS:5.*:*)
echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
@@ -373,7 +181,7 @@ EOF
echo m68k-sun-sunos${UNAME_RELEASE}
exit 0 ;;
sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
case "`/bin/arch`" in
sun3)
@@ -387,35 +195,36 @@ EOF
aushp:SunOS:*:*)
echo sparc-auspex-sunos${UNAME_RELEASE}
exit 0 ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
+ atari*:NetBSD:*:*)
+ echo m68k-atari-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sun3*:NetBSD:*:*)
+ echo m68k-sun-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sun3*:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:NetBSD:*:*)
+ echo m68k-apple-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme88k:OpenBSD:*:*)
+ echo m88k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit 0 ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit 0 ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit 0 ;;
powerpc:machten:*:*)
echo powerpc-apple-machten${UNAME_RELEASE}
exit 0 ;;
+ macppc:NetBSD:*:*)
+ echo powerpc-apple-netbsd${UNAME_RELEASE}
+ exit 0 ;;
RISC*:Mach:*:*)
echo mips-dec-mach_bsd4.3
exit 0 ;;
@@ -425,18 +234,12 @@ EOF
VAX*:ULTRIX*:*:*)
echo vax-dec-ultrix${UNAME_RELEASE}
exit 0 ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
+ 2020:CLIX:*:*)
echo clipper-intergraph-clix${UNAME_RELEASE}
exit 0 ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
+ sed 's/^ //' << EOF >dummy.c
+ int main (argc, argv) int argc; char **argv; {
#if defined (host_mips) && defined (MIPSEB)
#if defined (SYSTYPE_SYSV)
printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
@@ -451,20 +254,12 @@ EOF
exit (-1);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c \
- && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
- && exit 0
+ ${CC-cc} dummy.c -o dummy \
+ && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+ && rm dummy.c dummy && exit 0
+ rm -f dummy.c dummy
echo mips-mips-riscos${UNAME_RELEASE}
exit 0 ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit 0 ;;
- Motorola:*:4.3:PL8-*)
- echo powerpc-harris-powermax
- exit 0 ;;
- Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
- echo powerpc-harris-powermax
- exit 0 ;;
Night_Hawk:Power_UNIX:*:*)
echo powerpc-harris-powerunix
exit 0 ;;
@@ -480,18 +275,15 @@ EOF
AViiON:dgux:*:*)
# DG/UX returns AViiON for all architectures
UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
+ if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
+ -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
else
- echo i586-dg-dgux${UNAME_RELEASE}
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
fi
+ else echo i586-dg-dgux${UNAME_RELEASE}
+ fi
exit 0 ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
echo m88k-dolphin-sysv3
@@ -512,21 +304,12 @@ EOF
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
+ i?86:AIX:*:*)
echo i386-ibm-aix
exit 0 ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit 0 ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ sed 's/^ //' << EOF >dummy.c
#include <sys/systemcfg.h>
main()
@@ -537,7 +320,8 @@ EOF
exit(0);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+ ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+ rm -f dummy.c dummy
echo rs6000-ibm-aix3.2.5
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
echo rs6000-ibm-aix3.2.4
@@ -545,9 +329,9 @@ EOF
echo rs6000-ibm-aix3.2
fi
exit 0 ;;
- *:AIX:*:[45])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ *:AIX:*:4)
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
@@ -555,7 +339,7 @@ EOF
if [ -x /usr/bin/oslevel ] ; then
IBM_REV=`/usr/bin/oslevel`
else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ IBM_REV=4.${UNAME_RELEASE}
fi
echo ${IBM_ARCH}-ibm-aix${IBM_REV}
exit 0 ;;
@@ -565,7 +349,7 @@ EOF
ibmrt:4.4BSD:*|romp-ibm:BSD:*)
echo romp-ibm-bsd4.4
exit 0 ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and
echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
exit 0 ;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
@@ -581,47 +365,28 @@ EOF
echo m68k-hp-bsd4.4
exit 0 ;;
9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
case "${UNAME_MACHINE}" in
9000/31? ) HP_ARCH=m68000 ;;
9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
+ 9000/6?? | 9000/7?? | 9000/80[24] | 9000/8?[13679] | 9000/892 )
+ sed 's/^ //' << EOF >dummy.c
#include <stdlib.h>
#include <unistd.h>
-
+
int main ()
{
#if defined(_SC_KERNEL_BITS)
long bits = sysconf(_SC_KERNEL_BITS);
- #endif
+ #endif
long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
+
+ switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
+ case CPU_PA_RISC2_0:
#if defined(_SC_KERNEL_BITS)
- switch (bits)
+ switch (bits)
{
case 64: puts ("hppa2.0w"); break;
case 32: puts ("hppa2.0n"); break;
@@ -629,36 +394,20 @@ EOF
} break;
#else /* !defined(_SC_KERNEL_BITS) */
puts ("hppa2.0"); break;
- #endif
+ #endif
default: puts ("hppa1.0"); break;
}
exit (0);
}
EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
- test -z "$HP_ARCH" && HP_ARCH=hppa
- fi ;;
+ (${CC-cc} dummy.c -o dummy 2>/dev/null ) && HP_ARCH=`./dummy`
+ rm -f dummy.c dummy
esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
- then
- # avoid double evaluation of $set_cc_for_build
- test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
- then
- HP_ARCH="hppa2.0w"
- else
- HP_ARCH="hppa64"
- fi
- fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
- ia64:HP-UX:*:*)
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
exit 0 ;;
3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ sed 's/^ //' << EOF >dummy.c
#include <unistd.h>
int
main ()
@@ -683,7 +432,8 @@ EOF
exit (0);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+ ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+ rm -f dummy.c dummy
echo unknown-hitachi-hiuxwe2
exit 0 ;;
9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
@@ -692,16 +442,13 @@ EOF
9000/8??:4.3bsd:*:*)
echo hppa1.0-hp-bsd
exit 0 ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit 0 ;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
echo hppa1.1-hp-osf
exit 0 ;;
hp8??:OSF1:*:*)
echo hppa1.0-hp-osf
exit 0 ;;
- i*86:OSF1:*:*)
+ i?86:OSF1:*:*)
if [ -x /usr/sbin/sysversion ] ; then
echo ${UNAME_MACHINE}-unknown-osf1mk
else
@@ -729,55 +476,51 @@ EOF
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
echo c4-convex-bsd
exit 0 ;;
+ CRAY*X-MP:*:*:*)
+ echo xmp-cray-unicos
+ exit 0 ;;
CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ echo ymp-cray-unicos${UNAME_RELEASE}
exit 0 ;;
CRAY*[A-Z]90:*:*:*)
echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
exit 0 ;;
CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ echo t90-cray-unicos${UNAME_RELEASE}
exit 0 ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- *:UNICOS/mp:*:*)
- echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ CRAY-2:*:*:*)
+ echo cray2-cray-unicos
+ exit 0 ;;
+ F300:UNIX_System_V:*:*)
+ FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'`
FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit 0 ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ F301:UNIX_System_V:*:*)
+ echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
+ exit 0 ;;
+ hp3[0-9][05]:NetBSD:*:*)
+ echo m68k-hp-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ hp300:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
sparc*:BSD/OS:*:*)
echo sparc-unknown-bsdi${UNAME_RELEASE}
exit 0 ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ i?86:BSD/386:*:* | *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
exit 0 ;;
*:FreeBSD:*:*)
- # Determine whether the default compiler uses glibc.
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #if __GLIBC__ >= 2
- LIBC=gnu
- #else
- LIBC=
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit 0 ;;
+ *:NetBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ exit 0 ;;
+ *:OpenBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
exit 0 ;;
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
@@ -785,24 +528,6 @@ EOF
i*:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
exit 0 ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit 0 ;;
- x86:Interix*:3*)
- echo i586-pc-interix3
- exit 0 ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit 0 ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit 0 ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit 0 ;;
p*:CYGWIN*:*)
echo powerpcle-unknown-cygwin
exit 0 ;;
@@ -812,159 +537,145 @@ EOF
*:GNU:*:*)
echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
exit 0 ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit 0 ;;
- arm*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- mips:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips
- #undef mipsel
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mipsel
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips
- #else
- CPU=
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
- ;;
- mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips64
- #undef mips64el
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mips64el
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips64
- #else
- CPU=
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
- ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit 0 ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit 0 ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit 0 ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
+ *:Linux:*:*)
+ # uname on the ARM produces all sorts of strangeness, and we need to
+ # filter it out.
+ case "$UNAME_MACHINE" in
+ arm* | sa110*) UNAME_MACHINE="arm" ;;
esac
- exit 0 ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit 0 ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit 0 ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
- exit 0 ;;
- i*86:Linux:*:*)
+
# The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Set LC_ALL=C to ensure ld outputs messages in English.
- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
+ # first see if it will tell us.
+ ld_help_string=`ld --help 2>&1`
+ ld_supported_emulations=`echo $ld_help_string \
+ | sed -ne '/supported emulations:/!d
s/[ ][ ]*/ /g
- s/.*supported targets: *//
+ s/.*supported emulations: *//
s/ .*//
p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit 0 ;;
- coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit 0 ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit 0 ;;
+ case "$ld_supported_emulations" in
+ i?86linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0 ;;
+ i?86coff) echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0 ;;
+ sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
+ armlinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
+ m68klinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
+ elf32ppc) echo "powerpc-unknown-linux-gnu" ; exit 0 ;;
esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #ifdef __INTEL_COMPILER
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
+
+ if test "${UNAME_MACHINE}" = "alpha" ; then
+ sed 's/^ //' <<EOF >dummy.s
+ .globl main
+ .ent main
+ main:
+ .frame \$30,0,\$26,0
+ .prologue 0
+ .long 0x47e03d80 # implver $0
+ lda \$2,259
+ .long 0x47e20c21 # amask $2,$1
+ srl \$1,8,\$2
+ sll \$2,2,\$2
+ sll \$0,3,\$0
+ addl \$1,\$0,\$0
+ addl \$2,\$0,\$0
+ ret \$31,(\$26),1
+ .end main
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
- ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
+ LIBC=""
+ ${CC-cc} dummy.s -o dummy 2>/dev/null
+ if test "$?" = 0 ; then
+ ./dummy
+ case "$?" in
+ 7)
+ UNAME_MACHINE="alpha"
+ ;;
+ 15)
+ UNAME_MACHINE="alphaev5"
+ ;;
+ 14)
+ UNAME_MACHINE="alphaev56"
+ ;;
+ 10)
+ UNAME_MACHINE="alphapca56"
+ ;;
+ 16)
+ UNAME_MACHINE="alphaev6"
+ ;;
+ esac
+
+ objdump --private-headers dummy | \
+ grep ld.so.1 > /dev/null
+ if test "$?" = 0 ; then
+ LIBC="libc1"
+ fi
+ fi
+ rm -f dummy.s dummy
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
+ elif test "${UNAME_MACHINE}" = "mips" ; then
+ cat >dummy.c <<EOF
+main(argc, argv)
+ int argc;
+ char *argv[];
+{
+#ifdef __MIPSEB__
+ printf ("%s-unknown-linux-gnu\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+ printf ("%sel-unknown-linux-gnu\n", argv[1]);
+#endif
+ return 0;
+}
+EOF
+ ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
+ rm -f dummy.c dummy
+ else
+ # Either a pre-BFD a.out linker (linux-gnuoldld)
+ # or one that does not give us useful --help.
+ # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+ # If ld does not provide *any* "supported emulations:"
+ # that means it is gnuoldld.
+ echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
+ test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+
+ case "${UNAME_MACHINE}" in
+ i?86)
+ VENDOR=pc;
+ ;;
+ *)
+ VENDOR=unknown;
+ ;;
+ esac
+ # Determine whether the default compiler is a.out or elf
+ cat >dummy.c <<EOF
+#include <features.h>
+main(argc, argv)
+ int argc;
+ char *argv[];
+{
+#ifdef __ELF__
+# ifdef __GLIBC__
+# if __GLIBC__ >= 2
+ printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+# else
+ printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+# else
+ printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+#else
+ printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+#endif
+ return 0;
+}
+EOF
+ ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
+ rm -f dummy.c dummy
+ fi ;;
+# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
+# are messed up and put the nodename in both sysname and nodename.
+ i?86:DYNIX/ptx:4*:*)
echo i386-sequent-sysv4
exit 0 ;;
- i*86:UNIX_SV:4.2MP:2.*)
+ i?86:UNIX_SV:4.2MP:2.*)
# Unixware is an offshoot of SVR4, but it has its own version
# number series starting with 2...
# I am not positive that other SVR4 systems won't match this,
@@ -972,59 +683,35 @@ EOF
# Use sysv4.2uw... so that sysv4* matches it.
echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
exit 0 ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit 0 ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit 0 ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit 0 ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit 0 ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
fi
exit 0 ;;
- i*86:*:5:[78]*)
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit 0 ;;
- i*86:*:3.2:*)
+ i?86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
- (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
&& UNAME_MACHINE=i586
- (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
else
echo ${UNAME_MACHINE}-pc-sysv32
fi
exit 0 ;;
+ i?86:UnixWare:*:*)
+ if /bin/uname -X 2>/dev/null >/dev/null ; then
+ (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ fi
+ echo ${UNAME_MACHINE}-unixware-${UNAME_RELEASE}-${UNAME_VERSION}
+ exit 0 ;;
pc:*:*:*)
- # Left here for compatibility:
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i386.
echo i386-pc-msdosdjgpp
@@ -1046,15 +733,9 @@ EOF
# "miniframe"
echo m68010-convergent-sysv
exit 0 ;;
- mc68k:UNIX:SYSTEM5:3.51m)
- echo m68k-convergent-sysv
- exit 0 ;;
- M680?0:D-NIX:5.3:*)
- echo m68k-diab-dnix
- exit 0 ;;
M68*:*:R3V[567]*:*)
test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0)
+ 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
@@ -1065,27 +746,24 @@ EOF
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& echo i486-ncr-sysv4 && exit 0 ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ m68*:LynxOS:2.*:*)
echo m68k-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
mc68030:UNIX_System_V:4.*:*)
echo m68k-atari-sysv4
exit 0 ;;
+ i?86:LynxOS:2.*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
TSUNAMI:LynxOS:2.*:*)
echo sparc-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
- rs6000:LynxOS:2.*:*)
+ rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
echo rs6000-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
SM[BE]S:UNIX_SV:*:*)
echo mips-dde-sysv${UNAME_RELEASE}
exit 0 ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
RM*:SINIX-*:*:*)
echo mips-sni-sysv4
exit 0 ;;
@@ -1097,8 +775,8 @@ EOF
echo ns32k-sni-sysv
fi
exit 0 ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <[email protected]>
+ PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <[email protected]>
echo i586-unisys-sysv4
exit 0 ;;
*:UNIX_System_V:4*:FTX*)
@@ -1110,17 +788,13 @@ EOF
# From [email protected].
echo i860-stratus-sysv4
exit 0 ;;
- *:VOS:*:*)
- # From [email protected].
- echo hppa1.1-stratus-vos
- exit 0 ;;
mc68*:A/UX:*:*)
echo m68k-apple-aux${UNAME_RELEASE}
exit 0 ;;
- news*:NEWS-OS:6*:*)
+ news*:NEWS-OS:*:6*)
echo mips-sony-newsos6
exit 0 ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R4000:UNIX_SV:*:*)
if [ -d /usr/nec ]; then
echo mips-nec-sysv${UNAME_RELEASE}
else
@@ -1136,87 +810,12 @@ EOF
BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
echo i586-pc-beos
exit 0 ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Darwin:*:*)
- case `uname -p` in
- *86) UNAME_PROCESSOR=i686 ;;
- powerpc) UNAME_PROCESSOR=powerpc ;;
- esac
- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit 0 ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
- UNAME_PROCESSOR=i386
- UNAME_MACHINE=pc
- fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit 0 ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit 0 ;;
- NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit 0 ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit 0 ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit 0 ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit 0 ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit 0 ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit 0 ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit 0 ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit 0 ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit 0 ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit 0 ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit 0 ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
+cat >dummy.c <<EOF
#ifdef _SEQUENT_
# include <sys/types.h>
# include <sys/utsname.h>
@@ -1254,10 +853,7 @@ main ()
#endif
int version;
version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
exit (0);
#endif
@@ -1302,24 +898,11 @@ main ()
#endif
#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
+#if !defined (ultrix)
+ printf ("vax-dec-bsd\n"); exit (0);
+#else
+ printf ("vax-dec-ultrix\n"); exit (0);
+#endif
#endif
#if defined (alliant) && defined (i860)
@@ -1330,7 +913,8 @@ main ()
}
EOF
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
+${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
+rm -f dummy.c dummy
# Apollos put the system type in the environment.
@@ -1362,48 +946,6 @@ then
esac
fi
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- ftp://ftp.gnu.org/pub/gnu/config/
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <[email protected]> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
+#echo '(Unable to guess system type)' 1>&2
exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/config.sub b/config.sub
index 04baf3d..00bea6e 100755
--- a/config.sub
+++ b/config.sub
@@ -1,10 +1,6 @@
#! /bin/sh
-# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-
-timestamp='2003-01-03'
-
+# Configuration validation subroutine script, version 1.1.
+# Copyright (C) 1991, 92-97, 1998 Free Software Foundation, Inc.
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
# can handle that machine. It does not imply ALL GNU software can.
@@ -29,9 +25,6 @@ timestamp='2003-01-03'
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
-# Please send patches to <[email protected]>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
@@ -52,73 +45,30 @@ timestamp='2003-01-03'
# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# It is wrong to echo any other type of specification.
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <[email protected]>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
- --version | -v )
- echo "$version" ; exit 0 ;;
- --help | --h* | -h )
- echo "$usage"; exit 0 ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help"
- exit 1 ;;
-
- *local*)
- # First pass through any local machine types.
- echo $1
- exit 0;;
-
- * )
- break ;;
- esac
-done
+if [ x$1 = x ]
+then
+ echo Configuration name missing. 1>&2
+ echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
+ echo "or $0 ALIAS" 1>&2
+ echo where ALIAS is a recognized configuration type. 1>&2
+ exit 1
+fi
-case $# in
- 0) echo "$me: missing argument$help" >&2
- exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
- exit 1;;
+# First pass through any local machine types.
+case $1 in
+ *local*)
+ echo $1
+ exit 0
+ ;;
+ *)
+ ;;
esac
# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
- nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+ linux-gnu*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
@@ -144,33 +94,15 @@ case $os in
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis)
- os=
- basic_machine=$1
- ;;
- -sim | -cisco | -oki | -wec | -winbond)
+ -apple)
os=
basic_machine=$1
;;
- -scout)
- ;;
- -wrs)
- os=-vxworks
- basic_machine=$1
- ;;
- -chorusos*)
- os=-chorusos
- basic_machine=$1
- ;;
- -chorusrdb)
- os=-chorusrdb
- basic_machine=$1
- ;;
-hiux*)
os=-hiuxwe2
;;
-sco5)
- os=-sco3.2v5
+ os=sco3.2v5
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco4)
@@ -189,9 +121,6 @@ case $os in
os=-sco3.2v2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
- -udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
-isc)
os=-isc2.2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -214,72 +143,26 @@ case $os in
-psos*)
os=-psos
;;
- -mint | -mint[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
esac
# Decode aliases for certain CPU-COMPANY combinations.
case $basic_machine in
# Recognize the basic CPU types without company name.
# Some are omitted here because they have special meanings below.
- 1750a | 580 \
- | a29k \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
- | clipper \
- | d10v | d30v | dlx | dsp16xx \
- | fr30 | frv \
- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- | i370 | i860 | i960 | ia64 \
- | ip2k \
- | m32r | m68000 | m68k | m88k | mcore \
- | mips | mipsbe | mipseb | mipsel | mipsle \
- | mips16 \
- | mips64 | mips64el \
- | mips64vr | mips64vrel \
- | mips64orion | mips64orionel \
- | mips64vr4100 | mips64vr4100el \
- | mips64vr4300 | mips64vr4300el \
- | mips64vr5000 | mips64vr5000el \
- | mipsisa32 | mipsisa32el \
- | mipsisa32r2 | mipsisa32r2el \
- | mipsisa64 | mipsisa64el \
- | mipsisa64sb1 | mipsisa64sb1el \
- | mipsisa64sr71k | mipsisa64sr71kel \
- | mipstx39 | mipstx39el \
- | mn10200 | mn10300 \
- | msp430 \
- | ns16k | ns32k \
- | openrisc | or32 \
- | pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
- | pyramid \
- | sh | sh[1234] | sh3e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
- | sh64 | sh64le \
- | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
- | strongarm \
- | tahoe | thumb | tic80 | tron \
- | v850 | v850e \
- | we32k \
- | x86 | xscale | xstormy16 | xtensa \
- | z8k)
+ tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
+ | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
+ | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 | hppa2.0 \
+ | alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \
+ | i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \
+ | mips64 | mipsel | mips64el | mips64orion | mips64orionel \
+ | mipstx39 | mipstx39el \
+ | sparc | sparclet | sparclite | sparc64 | v850)
basic_machine=$basic_machine-unknown
;;
- m6811 | m68hc11 | m6812 | m68hc12)
- # Motorola 68HC11/12.
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
-
# We use `pc' rather than `unknown'
# because (1) that's what they normally are, and
# (2) the word "unknown" tends to confuse beginning users.
- i*86 | x86_64)
+ i[34567]86)
basic_machine=$basic_machine-pc
;;
# Object if more than one company name word.
@@ -288,79 +171,27 @@ case $basic_machine in
exit 1
;;
# Recognize the basic CPU types with company name.
- 580-* \
- | a29k-* \
- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* \
- | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* \
- | clipper-* | cydra-* \
- | d10v-* | d30v-* | dlx-* \
- | elxsi-* \
- | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
- | h8300-* | h8500-* \
- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- | i*86-* | i860-* | i960-* | ia64-* \
- | ip2k-* \
- | m32r-* \
- | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | mcore-* \
- | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
- | mips16-* \
- | mips64-* | mips64el-* \
- | mips64vr-* | mips64vrel-* \
- | mips64orion-* | mips64orionel-* \
- | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* \
- | mips64vr5000-* | mips64vr5000el-* \
- | mipsisa32-* | mipsisa32el-* \
- | mipsisa32r2-* | mipsisa32r2el-* \
- | mipsisa64-* | mipsisa64el-* \
- | mipsisa64sb1-* | mipsisa64sb1el-* \
- | mipsisa64sr71k-* | mipsisa64sr71kel-* \
- | mipstx39-* | mipstx39el-* \
- | msp430-* \
- | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
- | orion-* \
- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
- | pyramid-* \
- | romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh3e-* | sh[34]eb-* | shbe-* \
- | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
- | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
- | tahoe-* | thumb-* | tic30-* | tic4x-* | tic54x-* | tic80-* | tron-* \
- | v850-* | v850e-* | vax-* \
- | we32k-* \
- | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
- | xtensa-* \
- | ymp-* \
- | z8k-*)
+ vax-* | tahoe-* | i[34567]86-* | i860-* | m32r-* | m68k-* | m68000-* \
+ | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
+ | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+ | power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \
+ | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* \
+ | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \
+ | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \
+ | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
+ | sparc64-* | mips64-* | mipsel-* \
+ | mips64el-* | mips64orion-* | mips64orionel-* \
+ | mipstx39-* | mipstx39el-* \
+ | f301-*)
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
- 386bsd)
- basic_machine=i386-unknown
- os=-bsd
- ;;
3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
basic_machine=m68000-att
;;
3b*)
basic_machine=we32k-att
;;
- a29khif)
- basic_machine=a29k-amd
- os=-udi
- ;;
- adobe68k)
- basic_machine=m68010-adobe
- os=-scout
- ;;
alliant | fx80)
basic_machine=fx80-alliant
;;
@@ -376,24 +207,20 @@ case $basic_machine in
os=-sysv
;;
amiga | amiga-*)
- basic_machine=m68k-unknown
+ basic_machine=m68k-cbm
;;
amigaos | amigados)
- basic_machine=m68k-unknown
+ basic_machine=m68k-cbm
os=-amigaos
;;
amigaunix | amix)
- basic_machine=m68k-unknown
+ basic_machine=m68k-cbm
os=-sysv4
;;
apollo68)
basic_machine=m68k-apollo
os=-sysv
;;
- apollo68bsd)
- basic_machine=m68k-apollo
- os=-bsd
- ;;
aux)
basic_machine=m68k-apple
os=-aux
@@ -402,10 +229,6 @@ case $basic_machine in
basic_machine=ns32k-sequent
os=-dynix
;;
- c90)
- basic_machine=c90-cray
- os=-unicos
- ;;
convex-c1)
basic_machine=c1-convex
os=-bsd
@@ -426,30 +249,27 @@ case $basic_machine in
basic_machine=c38-convex
os=-bsd
;;
- cray | j90)
- basic_machine=j90-cray
+ cray | ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ cray2)
+ basic_machine=cray2-cray
+ os=-unicos
+ ;;
+ [ctj]90-cray)
+ basic_machine=c90-cray
os=-unicos
;;
crds | unos)
basic_machine=m68k-crds
;;
- cris | cris-* | etrax*)
- basic_machine=cris-axis
- ;;
da30 | da30-*)
basic_machine=m68k-da30
;;
decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
basic_machine=mips-dec
;;
- decsystem10* | dec10*)
- basic_machine=pdp10-dec
- os=-tops10
- ;;
- decsystem20* | dec20*)
- basic_machine=pdp10-dec
- os=-tops20
- ;;
delta | 3300 | motorola-3300 | motorola-delta \
| 3300-motorola | delta-motorola)
basic_machine=m68k-motorola
@@ -477,10 +297,6 @@ case $basic_machine in
encore | umax | mmax)
basic_machine=ns32k-encore
;;
- es1800 | OSE68k | ose68k | ose | OSE)
- basic_machine=m68k-ericsson
- os=-ose
- ;;
fx2800)
basic_machine=i860-alliant
;;
@@ -491,10 +307,6 @@ case $basic_machine in
basic_machine=tron-gmicro
os=-sysv
;;
- go32)
- basic_machine=i386-pc
- os=-go32
- ;;
h3050r* | hiux*)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
@@ -503,14 +315,6 @@ case $basic_machine in
basic_machine=h8300-hitachi
os=-hms
;;
- h8300xray)
- basic_machine=h8300-hitachi
- os=-xray
- ;;
- h8500hms)
- basic_machine=h8500-hitachi
- os=-hms
- ;;
harris)
basic_machine=m88k-harris
os=-sysv3
@@ -526,30 +330,13 @@ case $basic_machine in
basic_machine=m68k-hp
os=-hpux
;;
- hp3k9[0-9][0-9] | hp9[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
hp9k2[0-9][0-9] | hp9k31[0-9])
basic_machine=m68000-hp
;;
hp9k3[2-9][0-9])
basic_machine=m68k-hp
;;
- hp9k6[0-9][0-9] | hp6[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k7[0-79][0-9] | hp7[0-79][0-9])
- basic_machine=hppa1.1-hp
- ;;
- hp9k78[0-9] | hp78[0-9])
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][13679] | hp8[0-9][13679])
+ hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7)
basic_machine=hppa1.1-hp
;;
hp9k8[0-9][0-9] | hp8[0-9][0-9])
@@ -558,42 +345,27 @@ case $basic_machine in
hppa-next)
os=-nextstep3
;;
- hppaosf)
- basic_machine=hppa1.1-hp
- os=-osf
- ;;
- hppro)
- basic_machine=hppa1.1-hp
- os=-proelf
- ;;
i370-ibm* | ibm*)
basic_machine=i370-ibm
+ os=-mvs
;;
# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i*86v32)
+ i[34567]86v32)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv32
;;
- i*86v4*)
+ i[34567]86v4*)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv4
;;
- i*86v)
+ i[34567]86v)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv
;;
- i*86sol2)
+ i[34567]86sol2)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-solaris2
;;
- i386mach)
- basic_machine=i386-mach
- os=-mach
- ;;
- i386-vsta | vsta)
- basic_machine=i386-unknown
- os=-vsta
- ;;
iris | iris4d)
basic_machine=mips-sgi
case $os in
@@ -619,16 +391,16 @@ case $basic_machine in
basic_machine=ns32k-utek
os=-sysv
;;
- mingw32)
- basic_machine=i386-pc
- os=-mingw32
- ;;
miniframe)
basic_machine=m68000-convergent
;;
- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
- basic_machine=m68k-atari
- os=-mint
+ mipsel*-linux*)
+ basic_machine=mipsel-unknown
+ os=-linux-gnu
+ ;;
+ mips*-linux*)
+ basic_machine=mips-unknown
+ os=-linux-gnu
;;
mips3*-*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
@@ -636,38 +408,10 @@ case $basic_machine in
mips3*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
;;
- mmix*)
- basic_machine=mmix-knuth
- os=-mmixware
- ;;
- monitor)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- morphos)
- basic_machine=powerpc-unknown
- os=-morphos
- ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
- ;;
- mvs)
- basic_machine=i370-ibm
- os=-mvs
- ;;
ncr3000)
basic_machine=i486-ncr
os=-sysv4
;;
- netbsd386)
- basic_machine=i386-unknown
- os=-netbsd
- ;;
- netwinder)
- basic_machine=armv4l-rebel
- os=-linux
- ;;
news | news700 | news800 | news900)
basic_machine=m68k-sony
os=-newsos
@@ -680,10 +424,6 @@ case $basic_machine in
basic_machine=mips-sony
os=-newsos
;;
- necv70)
- basic_machine=v70-nec
- os=-sysv
- ;;
next | m*-next )
basic_machine=m68k-next
case $os in
@@ -709,40 +449,9 @@ case $basic_machine in
basic_machine=i960-intel
os=-nindy
;;
- mon960)
- basic_machine=i960-intel
- os=-mon960
- ;;
- nonstopux)
- basic_machine=mips-compaq
- os=-nonstopux
- ;;
np1)
basic_machine=np1-gould
;;
- nv1)
- basic_machine=nv1-cray
- os=-unicosmp
- ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
- op50n-* | op60c-*)
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
- or32 | or32-*)
- basic_machine=or32-unknown
- os=-coff
- ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
- ;;
- os68k)
- basic_machine=m68k-none
- os=-os68k
- ;;
pa-hitachi)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
@@ -757,85 +466,51 @@ case $basic_machine in
pbb)
basic_machine=m68k-tti
;;
- pc532 | pc532-*)
+ pc532 | pc532-*)
basic_machine=ns32k-pc532
;;
- pentium | p5 | k5 | k6 | nexgen | viac3)
+ pentium | p5 | k5 | nexen)
basic_machine=i586-pc
;;
- pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ pentiumpro | p6 | k6 | 6x86)
basic_machine=i686-pc
;;
pentiumii | pentium2)
- basic_machine=i686-pc
+ basic_machine=i786-pc
;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ pentium-* | p5-* | k5-* | nexen-*)
basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ pentiumpro-* | p6-* | k6-* | 6x86-*)
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumii-* | pentium2-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pn)
basic_machine=pn-gould
;;
- power) basic_machine=power-ibm
+ power) basic_machine=rs6000-ibm
;;
ppc) basic_machine=powerpc-unknown
- ;;
+ ;;
ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppcle | powerpclittle | ppc-le | powerpc-little)
basic_machine=powerpcle-unknown
- ;;
+ ;;
ppcle-* | powerpclittle-*)
basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
- ppc64) basic_machine=powerpc64-unknown
- ;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
- basic_machine=powerpc64le-unknown
- ;;
- ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
ps2)
basic_machine=i386-ibm
;;
- pw32)
- basic_machine=i586-unknown
- os=-pw32
- ;;
- rom68k)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
rm[46]00)
basic_machine=mips-siemens
;;
rtpc | rtpc-*)
basic_machine=romp-ibm
;;
- s390 | s390-*)
- basic_machine=s390-ibm
- ;;
- s390x | s390x-*)
- basic_machine=s390x-ibm
- ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
- sb1)
- basic_machine=mipsisa64sb1-unknown
- ;;
- sb1el)
- basic_machine=mipsisa64sb1el-unknown
- ;;
sequent)
basic_machine=i386-sequent
;;
@@ -843,10 +518,6 @@ case $basic_machine in
basic_machine=sh-hitachi
os=-hms
;;
- sparclite-wrs | simso-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
sps7)
basic_machine=m68k-bull
os=-sysv2
@@ -854,13 +525,6 @@ case $basic_machine in
spur)
basic_machine=spur-unknown
;;
- st2000)
- basic_machine=m68k-tandem
- ;;
- stratus)
- basic_machine=i860-stratus
- os=-sysv4
- ;;
sun2)
basic_machine=m68000-sun
;;
@@ -901,40 +565,16 @@ case $basic_machine in
sun386 | sun386i | roadrunner)
basic_machine=i386-sun
;;
- sv1)
- basic_machine=sv1-cray
- os=-unicos
- ;;
symmetry)
basic_machine=i386-sequent
os=-dynix
;;
- t3e)
- basic_machine=alphaev5-cray
- os=-unicos
- ;;
- t90)
- basic_machine=t90-cray
- os=-unicos
- ;;
- tic4x | c4x*)
- basic_machine=tic4x-unknown
- os=-coff
- ;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
tx39)
basic_machine=mipstx39-unknown
;;
tx39el)
basic_machine=mipstx39el-unknown
;;
- toad1)
- basic_machine=pdp10-xkl
- os=-tops20
- ;;
tower | tower-32)
basic_machine=m68k-ncr
;;
@@ -946,10 +586,6 @@ case $basic_machine in
basic_machine=a29k-nyu
os=-sym1
;;
- v810 | necv810)
- basic_machine=v810-nec
- os=-none
- ;;
vaxv)
basic_machine=vax-dec
os=-sysv
@@ -959,8 +595,8 @@ case $basic_machine in
os=-vms
;;
vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
+ basic_machine=f301-fujitsu
+ ;;
vxworks960)
basic_machine=i960-wrs
os=-vxworks
@@ -973,24 +609,12 @@ case $basic_machine in
basic_machine=a29k-wrs
os=-vxworks
;;
- w65*)
- basic_machine=w65-wdc
- os=-none
- ;;
- w89k-*)
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- ymp)
- basic_machine=ymp-cray
+ xmp)
+ basic_machine=xmp-cray
os=-unicos
;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
+ xps | xps100)
+ basic_machine=xps100-honeywell
;;
none)
basic_machine=none-none
@@ -999,14 +623,12 @@ case $basic_machine in
# Here we handle the default manufacturer of certain CPU types. It is in
# some cases the only manufacturer, in others, it is the most popular.
- w89k)
- basic_machine=hppa1.1-winbond
- ;;
- op50n)
- basic_machine=hppa1.1-oki
- ;;
- op60c)
- basic_machine=hppa1.1-oki
+ mips)
+ if [ x$os = x-linux-gnu ]; then
+ basic_machine=mips-unknown
+ else
+ basic_machine=mips-mips
+ fi
;;
romp)
basic_machine=romp-ibm
@@ -1017,26 +639,16 @@ case $basic_machine in
vax)
basic_machine=vax-dec
;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
pdp11)
basic_machine=pdp11-dec
;;
we32k)
basic_machine=we32k-att
;;
- sh3 | sh4 | sh3eb | sh4eb | sh[1234]le | sh3ele)
- basic_machine=sh-unknown
- ;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparc | sparcv9 | sparcv9b)
+ sparc)
basic_machine=sparc-sun
;;
- cydra)
+ cydra)
basic_machine=cydra-cydrome
;;
orion)
@@ -1045,15 +657,6 @@ case $basic_machine in
orion105)
basic_machine=clipper-highlevel
;;
- mac | mpw | mac-mpw)
- basic_machine=m68k-apple
- ;;
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
@@ -1107,41 +710,13 @@ case $os in
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
| -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -microbsd*)
+ | -mingw32* | -linux-gnu* | -uxpv* | -beos*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
- -qnx*)
- case $basic_machine in
- x86-* | i*86-*)
- ;;
- *)
- os=-nto$os
- ;;
- esac
- ;;
- -nto-qnx*)
- ;;
- -nto*)
- os=`echo $os | sed -e 's|nto|nto-qnx|'`
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
- ;;
- -mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
- ;;
-linux*)
os=`echo $os | sed -e 's|linux|linux-gnu|'`
;;
@@ -1151,12 +726,6 @@ case $os in
-sunos6*)
os=`echo $os | sed -e 's|sunos6|solaris3|'`
;;
- -opened*)
- os=-openedition
- ;;
- -wince*)
- os=-wince
- ;;
-osfrose*)
os=-osfrose
;;
@@ -1172,23 +741,11 @@ case $os in
-acis*)
os=-aos
;;
- -atheos*)
- os=-atheos
- ;;
- -386bsd)
- os=-bsd
- ;;
-ctix* | -uts*)
os=-sysv
;;
- -nova*)
- os=-rtmk-nova
- ;;
-ns2 )
- os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
+ os=-nextstep2
;;
# Preserve the version number of sinix5.
-sinix5.*)
@@ -1215,18 +772,9 @@ case $os in
# This must come after -sysvr4.
-sysv*)
;;
- -ose*)
- os=-ose
- ;;
- -es1800*)
- os=-ose
- ;;
-xenix)
os=-xenix
;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
- ;;
-none)
;;
*)
@@ -1252,17 +800,10 @@ case $basic_machine in
*-acorn)
os=-riscix1.2
;;
- arm*-rebel)
- os=-linux
- ;;
arm*-semi)
os=-aout
;;
- # This must come before the *-dec entry.
- pdp10-*)
- os=-tops20
- ;;
- pdp11-*)
+ pdp11-*)
os=-none
;;
*-dec | vax-*)
@@ -1280,18 +821,6 @@ case $basic_machine in
# default.
# os=-sunos4
;;
- m68*-cisco)
- os=-aout
- ;;
- mips*-cisco)
- os=-elf
- ;;
- mips*-*)
- os=-elf
- ;;
- or32-*)
- os=-coff
- ;;
*-tti) # must be before sparc entry or we get the wrong os.
os=-sysv3
;;
@@ -1304,15 +833,6 @@ case $basic_machine in
*-ibm)
os=-aix
;;
- *-wec)
- os=-proelf
- ;;
- *-winbond)
- os=-proelf
- ;;
- *-oki)
- os=-proelf
- ;;
*-hp)
os=-hpux
;;
@@ -1355,39 +875,27 @@ case $basic_machine in
*-next)
os=-nextstep3
;;
- *-gould)
+ *-gould)
os=-sysv
;;
- *-highlevel)
+ *-highlevel)
os=-bsd
;;
*-encore)
os=-bsd
;;
- *-sgi)
+ *-sgi)
os=-irix
;;
- *-siemens)
+ *-siemens)
os=-sysv4
;;
*-masscomp)
os=-rtu
;;
- f30[01]-fujitsu | f700-fujitsu)
+ f301-fujitsu)
os=-uxpv
;;
- *-rom68k)
- os=-coff
- ;;
- *-*bug)
- os=-coff
- ;;
- *-apple)
- os=-macos
- ;;
- *-atari*)
- os=-mint
- ;;
*)
os=-none
;;
@@ -1409,15 +917,9 @@ case $basic_machine in
-aix*)
vendor=ibm
;;
- -beos*)
- vendor=be
- ;;
-hpux*)
vendor=hp
;;
- -mpeix*)
- vendor=hp
- ;;
-hiux*)
vendor=hitachi
;;
@@ -1433,41 +935,21 @@ case $basic_machine in
-genix*)
vendor=ns
;;
- -mvs* | -opened*)
+ -mvs*)
vendor=ibm
;;
-ptx*)
vendor=sequent
;;
- -vxsim* | -vxworks* | -windiss*)
+ -vxsim* | -vxworks*)
vendor=wrs
;;
-aux*)
vendor=apple
;;
- -hms*)
- vendor=hitachi
- ;;
- -mpw* | -macos*)
- vendor=apple
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
- -vos*)
- vendor=stratus
- ;;
esac
basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
;;
esac
echo $basic_machine$os
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
