Control: tags -1 patch
Dear Maintainer,
In Ubuntu, the attached patch was applied to achieve the following:
* debian/rules:
- Remove legacy DH_COMPAT export.
- Add recommended build-arch and build-indep targets.
- Use dh_prep instead of dh_clean -k.
- Don't allow distclean to ignore all errors.
* debian/compat: Indicate compatibility level of 10.
* debian/control:
- Build-depend on debhelper (>= 10).
- Depend on ${misc:Depends}.
Thanks for considering the patch.
Logan Rosen
diff -u wayv-0.3/config.sub wayv-0.3/config.sub
--- wayv-0.3/config.sub
+++ wayv-0.3/config.sub
@@ -1,44 +1,40 @@
#! /bin/sh
# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
+# Copyright 1992-2016 Free Software Foundation, Inc.
-timestamp='2008-01-16'
+timestamp='2016-11-04'
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
-# Please send patches to <config-patc...@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
+# Please send patches to <config-patc...@gnu.org>.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
# that are meaningful with *any* GNU software.
@@ -57,8 +53,7 @@
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
+Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
Canonicalize a configuration name.
@@ -72,8 +67,7 @@
version="\
GNU config.sub ($timestamp)
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright 1992-2016 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -120,12 +114,18 @@
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
- nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
- uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* |
netbsd*-gnu* | \
+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* |
kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
+ kopensolaris*-gnu* | cloudabi*-eabi* | \
storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
+ android-linux)
+ os=-linux-android
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+ ;;
*)
basic_machine=`echo $1 | sed 's/-[^-]*$//'`
if [ $basic_machine != $1 ]
@@ -148,10 +148,13 @@
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray)
+ -apple | -axis | -knuth | -cray | -microblaze*)
os=
basic_machine=$1
;;
+ -bluegene*)
+ os=-cnk
+ ;;
-sim | -cisco | -oki | -wec | -winbond)
os=
basic_machine=$1
@@ -166,10 +169,10 @@
os=-chorusos
basic_machine=$1
;;
- -chorusrdb)
- os=-chorusrdb
+ -chorusrdb)
+ os=-chorusrdb
basic_machine=$1
- ;;
+ ;;
-hiux*)
os=-hiuxwe2
;;
@@ -214,6 +217,12 @@
-isc*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
+ -lynx*178)
+ os=-lynxos178
+ ;;
+ -lynx*5)
+ os=-lynxos5
+ ;;
-lynx*)
os=-lynxos
;;
@@ -238,59 +247,92 @@
# Some are omitted here because they have special meanings below.
1750a | 580 \
| a29k \
+ | aarch64 | aarch64_be \
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] |
alpha64pca5[67] \
| am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr |
avr32 \
+ | arc | arceb \
+ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+ | avr | avr32 \
+ | ba \
+ | be32 | be64 \
| bfin \
- | c4x | clipper \
+ | c4x | c8051 | clipper \
| d10v | d30v | dlx | dsp16xx \
- | fido | fr30 | frv \
+ | e2k | epiphany \
+ | fido | fr30 | frv | ft32 \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | hexagon \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
+ | k1om \
+ | le32 | le64 \
+ | lm32 \
| m32c | m32r | m32rle | m68000 | m68k | m88k \
- | maxq | mb | microblaze | mcore | mep \
+ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
- | mips64vr | mips64vrel \
+ | mips64octeon | mips64octeonel \
| mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
| mips64vr4100 | mips64vr4100el \
| mips64vr4300 | mips64vr4300el \
| mips64vr5000 | mips64vr5000el \
| mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
+ | mipsisa32r6 | mipsisa32r6el \
| mipsisa64 | mipsisa64el \
| mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64r6 | mipsisa64r6el \
| mipsisa64sb1 | mipsisa64sb1el \
| mipsisa64sr71k | mipsisa64sr71kel \
+ | mipsr5900 | mipsr5900el \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
+ | moxie \
| mt \
| msp430 \
- | nios | nios2 \
+ | nds32 | nds32le | nds32be \
+ | nios | nios2 | nios2eb | nios2el \
| ns16k | ns32k \
- | or32 \
+ | open8 | or1k | or1knd | or32 \
| pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+ | powerpc | powerpc64 | powerpc64le | powerpcle \
+ | pru \
| pyramid \
+ | riscv32 | riscv64 \
+ | rl78 | rx \
| score \
- | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle |
sh[1234]le | sh3ele \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb |
shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet |
sparclite \
| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
- | spu | strongarm \
- | tahoe | thumb | tic4x | tic80 | tron \
- | v850 | v850e \
+ | spu \
+ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+ | ubicom32 \
+ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+ | visium \
| we32k \
- | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
- | z8k)
+ | x86 | xc16x | xstormy16 | xtensa \
+ | z8k | z80)
basic_machine=$basic_machine-unknown
;;
- m6811 | m68hc11 | m6812 | m68hc12)
- # Motorola 68HC11/12.
+ c54x)
+ basic_machine=tic54x-unknown
+ ;;
+ c55x)
+ basic_machine=tic55x-unknown
+ ;;
+ c6x)
+ basic_machine=tic6x-unknown
+ ;;
+ leon|leon[3-9])
+ basic_machine=sparc-$basic_machine
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
basic_machine=$basic_machine-unknown
os=-none
;;
@@ -301,4 +343,19 @@
;;
+ strongarm | thumb | xscale)
+ basic_machine=arm-unknown
+ ;;
+ xgate)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ xscaleeb)
+ basic_machine=armeb-unknown
+ ;;
+
+ xscaleel)
+ basic_machine=armel-unknown
+ ;;
+
# We use `pc' rather than `unknown'
# because (1) that's what they normally are, and
@@ -314,64 +371,86 @@
# Recognize the basic CPU types with company name.
580-* \
| a29k-* \
+ | aarch64-* | aarch64_be-* \
| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* | avr32-* \
+ | ba-* \
+ | be32-* | be64-* \
| bfin-* | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
- | clipper-* | craynv-* | cydra-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* \
+ | c8051-* | clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
- | elxsi-* \
+ | e2k-* | elxsi-* \
| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | hexagon-* \
| i*86-* | i860-* | i960-* | ia64-* \
| ip2k-* | iq2000-* \
+ | k1om-* \
+ | le32-* | le64-* \
+ | lm32-* \
| m32c-* | m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+ | microblaze-* | microblazeel-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
- | mips64vr-* | mips64vrel-* \
+ | mips64octeon-* | mips64octeonel-* \
| mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
| mips64vr4100-* | mips64vr4100el-* \
| mips64vr4300-* | mips64vr4300el-* \
| mips64vr5000-* | mips64vr5000el-* \
| mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa32r6-* | mipsisa32r6el-* \
| mipsisa64-* | mipsisa64el-* \
| mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64r6-* | mipsisa64r6el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipsr5900-* | mipsr5900el-* \
| mipstx39-* | mipstx39el-* \
| mmix-* \
| mt-* \
| msp430-* \
- | nios-* | nios2-* \
+ | nds32-* | nds32le-* | nds32be-* \
+ | nios-* | nios2-* | nios2eb-* | nios2el-* \
| none-* | np1-* | ns16k-* | ns32k-* \
+ | open8-* \
+ | or1k*-* \
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+ | pru-* \
| pyramid-* \
- | romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* |
shbe-* \
+ | riscv32-* | riscv64-* \
+ | rl78-* | romp-* | rs6000-* | rx-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-*
| sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* |
sparclet-* \
| sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-*
| sx?-* \
- | tahoe-* | thumb-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
+ | tahoe-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tile*-* \
| tron-* \
- | v850-* | v850e-* | vax-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+ | vax-* \
+ | visium-* \
| we32k-* \
- | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* \
| xstormy16-* | xtensa*-* \
| ymp-* \
- | z8k-*)
+ | z8k-* | z80-*)
;;
# Recognize the basic CPU types without company name, with glob match.
xtensa*)
@@ -393,7 +472,7 @@
basic_machine=a29k-amd
os=-udi
;;
- abacus)
+ abacus)
basic_machine=abacus-unknown
;;
adobe68k)
@@ -439,6 +518,13 @@
basic_machine=m68k-apollo
os=-bsd
;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
+ asmjs)
+ basic_machine=asmjs-unknown
+ ;;
aux)
basic_machine=m68k-apple
os=-aux
@@ -455,10 +541,27 @@
basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
os=-linux
;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
+ c54x-*)
+ basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c55x-*)
+ basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c6x-*)
+ basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
c90)
basic_machine=c90-cray
os=-unicos
;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
convex-c1)
basic_machine=c1-convex
os=-bsd
@@ -487,7 +590,7 @@
basic_machine=craynv-cray
os=-unicosmp
;;
- cr16)
+ cr16 | cr16-*)
basic_machine=cr16-unknown
os=-elf
;;
@@ -526,6 +629,10 @@
basic_machine=m88k-motorola
os=-sysv3
;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
djgpp)
basic_machine=i586-pc
os=-msdosdjgpp
@@ -538,6 +645,14 @@
basic_machine=m68k-bull
os=-sysv3
;;
+ e500v[12])
+ basic_machine=powerpc-unknown
+ os=$os"spe"
+ ;;
+ e500v[12]-*)
+ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=$os"spe"
+ ;;
ebmon29k)
basic_machine=a29k-amd
os=-ebmon
@@ -641,7 +756,6 @@
i370-ibm* | ibm*)
basic_machine=i370-ibm
;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
i*86v32)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv32
@@ -680,6 +794,9 @@
basic_machine=m68k-isi
os=-sysv
;;
+ leon-*|leon[3-9]-*)
+ basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
+ ;;
m68knommu)
basic_machine=m68k-unknown
os=-linux
@@ -699,8 +816,15 @@
basic_machine=ns32k-utek
os=-sysv
;;
+ microblaze*)
+ basic_machine=microblaze-xilinx
+ ;;
+ mingw64)
+ basic_machine=x86_64-pc
+ os=-mingw64
+ ;;
mingw32)
- basic_machine=i386-pc
+ basic_machine=i686-pc
os=-mingw32
;;
mingw32ce)
@@ -728,6 +852,10 @@
basic_machine=powerpc-unknown
os=-morphos
;;
+ moxiebox)
+ basic_machine=moxie-unknown
+ os=-moxiebox
+ ;;
msdos)
basic_machine=i386-pc
os=-msdos
@@ -735,10 +863,18 @@
ms1-*)
basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
;;
+ msys)
+ basic_machine=i686-pc
+ os=-msys
+ ;;
mvs)
basic_machine=i370-ibm
os=-mvs
;;
+ nacl)
+ basic_machine=le32-unknown
+ os=-nacl
+ ;;
ncr3000)
basic_machine=i486-ncr
os=-sysv4
@@ -803,6 +939,12 @@
np1)
basic_machine=np1-gould
;;
+ neo-tandem)
+ basic_machine=neo-tandem
+ ;;
+ nse-tandem)
+ basic_machine=nse-tandem
+ ;;
nsr-tandem)
basic_machine=nsr-tandem
;;
@@ -885,11 +1027,12 @@
;;
power) basic_machine=power-ibm
;;
- ppc) basic_machine=powerpc-unknown
+ ppc | ppcbe) basic_machine=powerpc-unknown
;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ppc-* | ppcbe-*)
+ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
+ ppcle | powerpclittle)
basic_machine=powerpcle-unknown
;;
ppcle-* | powerpclittle-*)
@@ -899,7 +1042,7 @@
;;
ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed
's/^[^-]*-//'`
;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ ppc64le | powerpc64little)
basic_machine=powerpc64le-unknown
;;
ppc64le-* | powerpc64little-*)
@@ -912,7 +1055,11 @@
basic_machine=i586-unknown
os=-pw32
;;
- rdos)
+ rdos | rdos64)
+ basic_machine=x86_64-pc
+ os=-rdos
+ ;;
+ rdos32)
basic_machine=i386-pc
os=-rdos
;;
@@ -981,6 +1128,9 @@
basic_machine=i860-stratus
os=-sysv4
;;
+ strongarm-* | thumb-*)
+ basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
sun2)
basic_machine=m68000-sun
;;
@@ -1037,20 +1187,8 @@
basic_machine=t90-cray
os=-unicos
;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
- tic55x | c55x*)
- basic_machine=tic55x-unknown
- os=-coff
- ;;
- tic6x | c6x*)
- basic_machine=tic6x-unknown
- os=-coff
- ;;
tile*)
- basic_machine=tile-unknown
+ basic_machine=$basic_machine-unknown
os=-linux-gnu
;;
tx39)
@@ -1120,6 +1258,9 @@
xps | xps100)
basic_machine=xps100-honeywell
;;
+ xscale-* | xscalee[bl]-*)
+ basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+ ;;
ymp)
basic_machine=ymp-cray
os=-unicos
@@ -1128,6 +1269,10 @@
basic_machine=z8k-unknown
os=-sim
;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
none)
basic_machine=none-none
os=-none
@@ -1166,7 +1311,7 @@
we32k)
basic_machine=we32k-att
;;
- sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
basic_machine=sh-unknown
;;
sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
@@ -1213,9 +1358,12 @@
if [ x"$os" != x"" ]
then
case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
+ # First match some system type aliases
+ # that might get confused with valid system types.
# -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
-solaris1 | -solaris1.*)
os=`echo $os | sed -e 's|solaris1|sunos4|'`
;;
@@ -1236,29 +1384,32 @@
# Each alternative MUST END IN A *, to match a version number.
# -sysv* is not here because it comes later, after sysvr4.
-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos |
-sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* |
-solaris* \
+ | -sym* | -kopensolaris* | -plan9* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* \
+ | -aos* | -aros* | -cloudabi* | -sortix* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
| -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
- | -openbsd* | -solidbsd* \
+ | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \
| -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
| -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
- | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
+ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems*
\
+ | -midipix* | -mingw32* | -mingw64* | -linux-gnu* |
-linux-android* \
+ | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \
+ | -onefs* | -tirtos* | -phoenix* | -fuchsia*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1297,7 +1448,7 @@
-opened*)
os=-openedition
;;
- -os400*)
+ -os400*)
os=-os400
;;
-wince*)
@@ -1346,7 +1497,7 @@
-sinix*)
os=-sysv4
;;
- -tpf*)
+ -tpf*)
os=-tpf
;;
-triton*)
@@ -1382,12 +1533,16 @@
-aros*)
os=-aros
;;
- -kaos*)
- os=-kaos
- ;;
-zvmoe)
os=-zvmoe
;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -nacl*)
+ ;;
+ -ios)
+ ;;
-none)
;;
*)
@@ -1410,10 +1565,10 @@
# system, and we'll never get to this point.
case $basic_machine in
- score-*)
+ score-*)
os=-elf
;;
- spu-*)
+ spu-*)
os=-elf
;;
*-acorn)
@@ -1425,8 +1580,23 @@
arm*-semi)
os=-aout
;;
- c4x-* | tic4x-*)
- os=-coff
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ c8051-*)
+ os=-elf
+ ;;
+ hexagon-*)
+ os=-elf
+ ;;
+ tic54x-*)
+ os=-coff
+ ;;
+ tic55x-*)
+ os=-coff
+ ;;
+ tic6x-*)
+ os=-coff
;;
# This must come before the *-dec entry.
pdp10-*)
@@ -1446,14 +1616,11 @@
;;
m68000-sun)
os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
;;
m68*-cisco)
os=-aout
;;
- mep-*)
+ mep-*)
os=-elf
;;
mips*-cisco)
@@ -1480,7 +1647,7 @@
*-ibm)
os=-aix
;;
- *-knuth)
+ *-knuth)
os=-mmixware
;;
*-wec)
@@ -1585,7 +1752,7 @@
-sunos*)
vendor=sun
;;
- -aix*)
+ -cnk*|-aix*)
vendor=ibm
;;
-beos*)
diff -u wayv-0.3/config.guess wayv-0.3/config.guess
--- wayv-0.3/config.guess
+++ wayv-0.3/config.guess
@@ -1,14 +1,12 @@
#! /bin/sh
# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
+# Copyright 1992-2016 Free Software Foundation, Inc.
-timestamp='2008-01-23'
+timestamp='2016-10-02'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
@@ -17,26 +15,22 @@
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner <p...@bothner.com>.
-# Please send patches to <config-patc...@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
+# Please send patches to <config-patc...@gnu.org>.
+
me=`echo "$0" | sed -e 's,.*/,,'`
@@ -56,8 +50,7 @@
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright 1992-2016 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -139,12 +132,33 @@
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+ # If the system lacks a compiler, then just pick glibc.
+ # We could probably try harder.
+ LIBC=gnu
+
+ eval $set_cc_for_build
+ cat <<-EOF > $dummy.c
+ #include <features.h>
+ #if defined(__UCLIBC__)
+ LIBC=uclibc
+ #elif defined(__dietlibc__)
+ LIBC=dietlibc
+ #else
+ LIBC=gnu
+ #endif
+ EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's,
,,g'`
+ ;;
+esac
+
# Note: order is significant - the case branches are not exclusive.
case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
*:NetBSD:*:*)
# NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
# *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
# switched to ELF, *-*-netbsd* would select the old
# object file format. This provides both forward
@@ -154,23 +168,33 @@
# Note: NetBSD doesn't particularly care about the vendor
# portion of the name. We always set it to "unknown".
sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
+ /sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || \
+ echo unknown)`
case "${UNAME_MACHINE_ARCH}" in
armeb) machine=armeb-unknown ;;
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
sh5el) machine=sh5le-unknown ;;
+ earmv*)
+ arch=`echo ${UNAME_MACHINE_ARCH} | sed -e
's,^e\(armv[0-9]\).*$,\1,'`
+ endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne
's,^.*\(eb\)$,\1,p'`
+ machine=${arch}${endian}-unknown
+ ;;
*) machine=${UNAME_MACHINE_ARCH}-unknown ;;
esac
# The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
+ # to ELF recently (or will in the future) and ABI.
case "${UNAME_MACHINE_ARCH}" in
+ earm*)
+ os=netbsdelf
+ ;;
arm*|i386|m68k|ns32k|sh3*|sparc|vax)
eval $set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
+ | grep -q __ELF__
then
# Once all utilities can be ECOFF (netbsdecoff) or a.out
(netbsdaout).
# Return netbsd for either. FIX?
@@ -180,7 +204,14 @@
fi
;;
*)
- os=netbsd
+ os=netbsd
+ ;;
+ esac
+ # Determine ABI tags.
+ case "${UNAME_MACHINE_ARCH}" in
+ earm*)
+ expr='s/^earmv[0-9]/-eabi/;s/eb$//'
+ abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"`
;;
esac
# The OS release
@@ -193,18 +224,26 @@
release='-gnu'
;;
*)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d.
-f1,2`
;;
esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
+ echo "${machine}-${os}${release}${abi}"
+ exit ;;
+ *:Bitrig:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
exit ;;
*:OpenBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
exit ;;
+ *:LibertyBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-libertybsd${UNAME_RELEASE}
+ exit ;;
*:ekkoBSD:*:*)
echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
exit ;;
@@ -217,13 +256,16 @@
*:MirBSD:*:*)
echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
exit ;;
+ *:Sortix:*:*)
+ echo ${UNAME_MACHINE}-unknown-sortix
+ exit ;;
alpha:OSF1:*:*)
case $UNAME_RELEASE in
*4.0)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
;;
*5.*)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
;;
esac
# According to Compaq, /usr/sbin/psrinfo has been available on
@@ -233,43 +275,46 @@
ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\)
processor.*$/\1/p' | head -n 1`
case "$ALPHA_CPU_TYPE" in
"EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
+ UNAME_MACHINE=alpha ;;
"EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
+ UNAME_MACHINE=alpha ;;
"LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
+ UNAME_MACHINE=alpha ;;
"EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
+ UNAME_MACHINE=alphaev5 ;;
"EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
+ UNAME_MACHINE=alphaev56 ;;
"EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
+ UNAME_MACHINE=alphapca56 ;;
"EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
+ UNAME_MACHINE=alphapca57 ;;
"EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
+ UNAME_MACHINE=alphaev6 ;;
"EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
+ UNAME_MACHINE=alphaev67 ;;
"EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
+ UNAME_MACHINE=alphaev68 ;;
"EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
+ UNAME_MACHINE=alphaev68 ;;
"EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
+ UNAME_MACHINE=alphaev68 ;;
"EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
+ UNAME_MACHINE=alphaev69 ;;
"EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
+ UNAME_MACHINE=alphaev7 ;;
"EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
+ UNAME_MACHINE=alphaev79 ;;
esac
# A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e
's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit ;;
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e
's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+ # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+ exitcode=$?
+ trap '' 0
+ exit $exitcode ;;
Alpha\ *:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# Should we change UNAME_MACHINE based on the output of uname instead
@@ -295,12 +340,12 @@
echo s390-ibm-zvmoe
exit ;;
*:OS400:*:*)
- echo powerpc-ibm-os400
+ echo powerpc-ibm-os400
exit ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
exit ;;
- arm:riscos:*:*|arm:RISCOS:*:*)
+ arm*:riscos:*:*|arm*:RISCOS:*:*)
echo arm-unknown-riscos
exit ;;
SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
@@ -324,14 +369,33 @@
case `/usr/bin/uname -p` in
sparc) echo sparc-icl-nx7; exit ;;
esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e
's/[^.]*//'`
+ exit ;;
sun4H:SunOS:5.*:*)
echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux${UNAME_RELEASE}
+ exit ;;
i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ eval $set_cc_for_build
+ SUN_ARCH=i386
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH=x86_64
+ fi
+ fi
+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
@@ -353,7 +417,7 @@
exit ;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}')
2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3
case "`/bin/arch`" in
sun3)
echo m68k-sun-sunos${UNAME_RELEASE}
@@ -375,23 +439,23 @@
# MiNT. But MiNT is downward compatible to TOS, so this should
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
+ echo m68k-atari-mint${UNAME_RELEASE}
exit ;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
+ exit ;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
+ echo m68k-atari-mint${UNAME_RELEASE}
exit ;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit ;;
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit ;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit ;;
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit ;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit ;;
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit ;;
m68k:machten:*:*)
echo m68k-apple-machten${UNAME_RELEASE}
exit ;;
@@ -461,8 +525,8 @@
echo m88k-motorola-sysv3
exit ;;
AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
then
if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
@@ -475,7 +539,7 @@
else
echo i586-dg-dgux${UNAME_RELEASE}
fi
- exit ;;
+ exit ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
echo m88k-dolphin-sysv3
exit ;;
@@ -532,15 +596,16 @@
echo rs6000-ibm-aix3.2
fi
exit ;;
- *:AIX:*:[456])
+ *:AIX:*:[4567])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk
'{ print $1 }'`
if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1;
then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
+ if [ -x /usr/bin/lslpp ] ; then
+ IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+ awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
else
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
@@ -575,58 +640,58 @@
9000/[678][0-9][0-9])
if [ -x /usr/bin/getconf ]; then
sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS
2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH=hppa2.0n ;;
+ 64) HP_ARCH=hppa2.0w ;;
+ '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20
+ esac ;;
+ esac
fi
if [ "${HP_ARCH}" = "" ]; then
eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ sed 's/^ //' << EOF >$dummy.c
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) &&
HP_ARCH=`$dummy`
+ (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) &&
HP_ARCH=`$dummy`
test -z "$HP_ARCH" && HP_ARCH=hppa
fi ;;
esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
+ if [ ${HP_ARCH} = hppa2.0w ]
then
eval $set_cc_for_build
@@ -639,12 +704,12 @@
# $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
# => hppa64-hp-hpux11.23
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
- grep __LP64__ >/dev/null
+ if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep -q __LP64__
then
- HP_ARCH="hppa2.0w"
+ HP_ARCH=hppa2.0w
else
- HP_ARCH="hppa64"
+ HP_ARCH=hppa64
fi
fi
echo ${HP_ARCH}-hp-hpux${HPUX_REV}
@@ -711,22 +776,22 @@
exit ;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
echo c1-convex-bsd
- exit ;;
+ exit ;;
C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
- exit ;;
+ exit ;;
C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
echo c34-convex-bsd
- exit ;;
+ exit ;;
C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
echo c38-convex-bsd
- exit ;;
+ exit ;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
echo c4-convex-bsd
- exit ;;
+ exit ;;
CRAY*Y-MP:*:*:*)
echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit ;;
@@ -749,15 +814,15 @@
echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit ;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
+ FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz`
+ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
@@ -769,34 +834,39 @@
echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
exit ;;
*:FreeBSD:*:*)
- case ${UNAME_MACHINE} in
- pc98)
- echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e
's/[-(].*//'` ;;
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ case ${UNAME_PROCESSOR} in
amd64)
echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e
's/[-(].*//'` ;;
*)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed
-e 's/[-(].*//'` ;;
+ echo ${UNAME_PROCESSOR}-unknown-freebsd`echo
${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
esac
exit ;;
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
exit ;;
+ *:MINGW64*:*)
+ echo ${UNAME_MACHINE}-pc-mingw64
+ exit ;;
*:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
exit ;;
+ *:MSYS*:*)
+ echo ${UNAME_MACHINE}-pc-msys
+ exit ;;
i*:windows32*:*)
- # uname -m includes "-pc" on this system.
- echo ${UNAME_MACHINE}-mingw32
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
exit ;;
i*:PW*:*)
echo ${UNAME_MACHINE}-pc-pw32
exit ;;
- *:Interix*:[3456]*)
- case ${UNAME_MACHINE} in
+ *:Interix*:*)
+ case ${UNAME_MACHINE} in
x86)
echo i586-pc-interix${UNAME_RELEASE}
exit ;;
- EM64T | authenticamd)
+ authenticamd | genuineintel | EM64T)
echo x86_64-unknown-interix${UNAME_RELEASE}
exit ;;
IA64)
@@ -806,6 +876,9 @@
[345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
echo i${UNAME_MACHINE}-pc-mks
exit ;;
+ 8664:Windows_NT:*)
+ echo x86_64-pc-mks
+ exit ;;
i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
@@ -826,210 +899,169 @@
exit ;;
*:GNU:*:*)
# the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo
${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo
${UNAME_RELEASE}|sed -e 's,/.*$,,'`
exit ;;
*:GNU/*:*:*)
# other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,'
| tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,'
| tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
exit ;;
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
exit ;;
+ aarch64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ aarch64_be:Linux:*:*)
+ UNAME_MACHINE=aarch64_be
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ arc:Linux:*:* | arceb:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
arm*:Linux:*:*)
eval $set_cc_for_build
if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_EABI__
then
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
else
- echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_PCS_VFP
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+ fi
fi
exit ;;
avr32*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
cris:Linux:*:*)
- echo cris-axis-linux-gnu
+ echo ${UNAME_MACHINE}-axis-linux-${LIBC}
exit ;;
crisv32:Linux:*:*)
- echo crisv32-axis-linux-gnu
+ echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+ exit ;;
+ e2k:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
frv:Linux:*:*)
- echo frv-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ hexagon:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ i*86:Linux:*:*)
+ echo ${UNAME_MACHINE}-pc-linux-${LIBC}
exit ;;
ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ k1om:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
- mips:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips
- #undef mipsel
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) ||
defined(MIPSEL)
- CPU=mipsel
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) ||
defined(MIPSEB)
- CPU=mips
- #else
- CPU=
- #endif
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- ;;
- mips64:Linux:*:*)
+ mips:Linux:*:* | mips64:Linux:*:*)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#undef CPU
- #undef mips64
- #undef mips64el
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) ||
defined(MIPSEL)
- CPU=mips64el
+ CPU=${UNAME_MACHINE}el
#else
#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) ||
defined(MIPSEB)
- CPU=mips64
+ CPU=${UNAME_MACHINE}
#else
CPU=
#endif
#endif
EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
;;
- or32:Linux:*:*)
- echo or32-unknown-linux-gnu
+ mips64el:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
+ openrisc*:Linux:*:*)
+ echo or1k-unknown-linux-${LIBC}
exit ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
+ or32:Linux:*:* | or1k*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-${LIBC}
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-${LIBC}
exit ;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
+ PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+ PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+ *) echo hppa-unknown-linux-${LIBC} ;;
esac
exit ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-${LIBC}
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-${LIBC}
+ exit ;;
+ ppc64le:Linux:*:*)
+ echo powerpc64le-unknown-linux-${LIBC}
+ exit ;;
+ ppcle:Linux:*:*)
+ echo powerpcle-unknown-linux-${LIBC}
+ exit ;;
+ riscv32:Linux:*:* | riscv64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
+ echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
exit ;;
sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ tile*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
vax:Linux:*:*)
- echo ${UNAME_MACHINE}-dec-linux-gnu
+ echo ${UNAME_MACHINE}-dec-linux-${LIBC}
exit ;;
x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-pc-linux-${LIBC}
exit ;;
xtensa*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Set LC_ALL=C to ensure ld outputs messages in English.
- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit ;;
- coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C)
|| defined(__SUNPRO_CC)
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^LIBC/{
- s: ::g
- p
- }'`"
- test x"${LIBC}" != x && {
- echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
- exit
- }
- test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
- ;;
i*86:DYNIX/ptx:4*:*)
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
# earlier versions are messed up and put the nodename in both
@@ -1037,11 +1069,11 @@
echo i386-sequent-sysv4
exit ;;
i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
# I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
+ # Use sysv4.2uw... so that sysv4* matches it.
echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
exit ;;
i*86:OS/2:*:*)
@@ -1058,7 +1090,7 @@
i*86:syllable:*:*)
echo ${UNAME_MACHINE}-pc-syllable
exit ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
echo i386-unknown-lynxos${UNAME_RELEASE}
exit ;;
i*86:*DOS:*:*)
@@ -1073,7 +1105,7 @@
fi
exit ;;
i*86:*:5:[678]*)
- # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
case `/bin/uname -X | grep "^Machine"` in
*486*) UNAME_MACHINE=i486 ;;
*Pentium) UNAME_MACHINE=i586 ;;
@@ -1101,10 +1133,13 @@
exit ;;
pc:*:*:*)
# Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
- exit ;;
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configure will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
Intel:Mach:3*:*)
echo i386-pc-mach3
exit ;;
@@ -1139,8 +1174,18 @@
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
&& { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4; exit; } ;;
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' <
/etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
echo m68k-unknown-lynxos${UNAME_RELEASE}
exit ;;
@@ -1153,7 +1198,7 @@
rs6000:LynxOS:2.*:*)
echo rs6000-unknown-lynxos${UNAME_RELEASE}
exit ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
echo powerpc-unknown-lynxos${UNAME_RELEASE}
exit ;;
SM[BE]S:UNIX_SV:*:*)
@@ -1173,10 +1218,10 @@
echo ns32k-sni-sysv
fi
exit ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <richard.m.bar...@ccmail.census.gov>
- echo i586-unisys-sysv4
- exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <richard.m.bar...@ccmail.census.gov>
+ echo i586-unisys-sysv4
+ exit ;;
*:UNIX_System_V:4*:FTX*)
# From Gerald Hewes <he...@openmarket.com>.
# How about differentiating between stratus architectures? -djm
@@ -1202,11 +1247,11 @@
exit ;;
R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
+ echo mips-nec-sysv${UNAME_RELEASE}
else
- echo mips-unknown-sysv${UNAME_RELEASE}
+ echo mips-unknown-sysv${UNAME_RELEASE}
fi
- exit ;;
+ exit ;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
echo powerpc-be-beos
exit ;;
@@ -1216,6 +1261,12 @@
BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
echo i586-pc-beos
exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
+ x86_64:Haiku:*:*)
+ echo x86_64-unknown-haiku
+ exit ;;
SX-4:SUPER-UX:*:*)
echo sx4-nec-superux${UNAME_RELEASE}
exit ;;
@@ -1234,6 +1285,9 @@
SX-8R:SUPER-UX:*:*)
echo sx8r-nec-superux${UNAME_RELEASE}
exit ;;
+ SX-ACE:SUPER-UX:*:*)
+ echo sxace-nec-superux${UNAME_RELEASE}
+ exit ;;
Power*:Rhapsody:*:*)
echo powerpc-apple-rhapsody${UNAME_RELEASE}
exit ;;
@@ -1242,14 +1296,36 @@
exit ;;
*:Darwin:*:*)
UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
- case $UNAME_PROCESSOR in
- unknown) UNAME_PROCESSOR=powerpc ;;
- esac
+ eval $set_cc_for_build
+ if test "$UNAME_PROCESSOR" = unknown ; then
+ UNAME_PROCESSOR=powerpc
+ fi
+ if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
+ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif')
| \
+ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ case $UNAME_PROCESSOR in
+ i386) UNAME_PROCESSOR=x86_64 ;;
+ powerpc) UNAME_PROCESSOR=powerpc64 ;;
+ esac
+ fi
+ fi
+ elif test "$UNAME_PROCESSOR" = i386 ; then
+ # Avoid executing cc on OS X 10.9, as it ships with a stub
+ # that puts up a graphical alert prompting to install
+ # developer tools. Any system running Mac OS X 10.7 or
+ # later (Darwin 11 and later) is required to have a 64-bit
+ # processor. This is not true of the ARM version of Darwin
+ # that Apple uses in portable devices.
+ UNAME_PROCESSOR=x86_64
+ fi
echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
exit ;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
+ if test "$UNAME_PROCESSOR" = x86; then
UNAME_PROCESSOR=i386
UNAME_MACHINE=pc
fi
@@ -1258,7 +1334,10 @@
*:QNX:*:4*)
echo i386-pc-qnx
exit ;;
- NSE-?:NONSTOP_KERNEL:*:*)
+ NEO-?:NONSTOP_KERNEL:*:*)
+ echo neo-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSE-*:NONSTOP_KERNEL:*:*)
echo nse-tandem-nsk${UNAME_RELEASE}
exit ;;
NSR-?:NONSTOP_KERNEL:*:*)
@@ -1277,7 +1356,7 @@
# "uname -m" is not consistent, so use $cputype instead. 386
# is converted to i386 for consistency with other x86
# operating systems.
- if test "$cputype" = "386"; then
+ if test "$cputype" = 386; then
UNAME_MACHINE=i386
else
UNAME_MACHINE="$cputype"
@@ -1303,13 +1382,13 @@
echo pdp10-unknown-its
exit ;;
SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
+ echo mips-sei-seiux${UNAME_RELEASE}
exit ;;
*:DragonFly:*:*)
echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e
's/[-(].*//'`
exit ;;
*:*VMS:*:*)
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
case "${UNAME_MACHINE}" in
A*) echo alpha-dec-vms ; exit ;;
I*) echo ia64-dec-vms ; exit ;;
@@ -1319,179 +1398,36 @@
echo i386-pc-xenix
exit ;;
i*86:skyos:*:*)
- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/
.*$//'
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/
.*$//'`
exit ;;
i*86:rdos:*:*)
echo ${UNAME_MACHINE}-pc-rdos
exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
+ i*86:AROS:*:*)
+ echo ${UNAME_MACHINE}-pc-aros
exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
+ x86_64:VMkernel:*:*)
+ echo ${UNAME_MACHINE}-unknown-esx
exit ;;
- c34*)
- echo c34-convex-bsd
+ amd64:Isilon\ OneFS:*:*)
+ echo x86_64-unknown-onefs
exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
- exit ;;
- esac
-fi
+esac
cat >&2 <<EOF
$0: unable to guess system type
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
+This script (version $timestamp), has failed to recognize the
+operating system you are using. If your script is old, overwrite
+config.guess and config.sub with the latest versions from:
-
http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
and
-
http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patc...@gnu.org> in order to provide the needed
-information to handle your system.
+If $0 has already been updated, send the following data and any
+information you think might be pertinent to config-patc...@gnu.org to
+provide the necessary information to handle your system.
config.guess timestamp = $timestamp
diff -u wayv-0.3/debian/rules wayv-0.3/debian/rules
--- wayv-0.3/debian/rules
+++ wayv-0.3/debian/rules
@@ -5,9 +5,6 @@
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
-# This is the debhelper compatibility version to use.
-export DH_COMPAT=4
-
# These are used for cross-compiling and for saving the configure script
# from having to guess our platform (since we know it already)
DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
@@ -31,7 +28,9 @@
./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE)
--prefix=/ --datadir=\$${prefix}/etc/ --exec-prefix=\$${prefix}/usr
--mandir=\$${prefix}/usr/share/man --infodir=\$${prefix}/usr/share/info
--sysconfdir=\$${prefix}/etc
-build: build-stamp
+build: build-arch build-indep
+build-arch: build-stamp
+build-indep: build-stamp
build-stamp: config.status
dh_testdir
@@ -48,7 +47,7 @@
rm -f build-stamp
- -$(MAKE) distclean
+ [ ! -f Makefile ] || $(MAKE) distclean
ifneq "$(wildcard /usr/share/misc/config.sub)" ""
cp -f /usr/share/misc/config.sub config.sub
endif
@@ -62,7 +61,7 @@
install: build
dh_testdir
dh_testroot
- dh_clean -k
+ dh_prep
dh_installdirs
diff -u wayv-0.3/debian/control wayv-0.3/debian/control
--- wayv-0.3/debian/control
+++ wayv-0.3/debian/control
@@ -2,12 +2,12 @@
Section: x11
Priority: optional
Maintainer: Nick Rusnov <nickrus...@debian.org>
-Build-Depends: debhelper (>> 4.0.0), libx11-dev, libxtst-dev
+Build-Depends: debhelper (>= 10), libx11-dev, libxtst-dev
Standards-Version: 3.7.2.0
Package: wayv
Architecture: any
-Depends: ${shlibs:Depends}
+Depends: ${misc:Depends}, ${shlibs:Depends}
Description: Experimental hand writing/gesture recognition program
Enables human computer interaction, especially using gestures inputed via
the mouse.
only in patch2:
unchanged:
--- wayv-0.3.orig/debian/compat
+++ wayv-0.3/debian/compat
@@ -0,0 +1 @@
+10
