Package: src:linux Version: 4.9.6-3 Severity: normal Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? Upgrading of existing Debian from Jessie to Stretch on QNAP TS-419pII device, then booting into new kernel * What was the outcome of this action? eth1 is no longer detected, dmesg shows: [ 36.243254] kirkwood-pinctrl f1010000.pin-controller: pin PIN20 already requested by f1080000.sata; cannot claim for f1076000.ethernet-controller [ 36.399719] kirkwood-pinctrl f1010000.pin-controller: pin-20 (f1076000.ethernet-controller) status -22 [ 36.511281] kirkwood-pinctrl f1010000.pin-controller: could not request pin 20 (PIN20) from group mpp20 on device f1010000.pin-controller [ 36.660310] mv643xx_eth f1076000.ethernet-controller: Error applying setting, reverse things back * What outcome did you expect instead? eth1 detected as in Jessie: [ 30.665539] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 30.666417] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral [ 30.666482] platform mv643xx_eth_port.1: Driver mv643xx_eth_port requests probe deferral [ 30.792916] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:08:9b:cb:ae:be [ 30.793031] platform mv643xx_eth_port.1: Driver mv643xx_eth_port requests probe deferral [ 30.844477] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:08:9b:cb:ae:bf [ 33.880063] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 33.880155] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.982162] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 36.982217] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready -- Package-specific info: ** Version: Linux version 4.9.0-1-marvell (debian-ker...@lists.debian.org) (gcc version 6.3.0 20170121 (Debian 6.3.0-4) ) #1 Debian 4.9.6-3 (2017-01-28) ** Command line: root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816 ** Not tainted ** Kernel log: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.0-1-marvell (debian-ker...@lists.debian.org) (gcc version 6.3.0 20170121 (Debian 6.3.0-4) ) #1 Debian 4.9.6-3 (2017-01-28) [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt:Machine model: QNAP TS419 family [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c0592fe4, node_mem_map dfbf8000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 504444K/524288K available (3776K kernel code, 373K rwdata, 1128K rodata, 296K init, 296K bss, 19844K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc03b8330 (3777 kB) .init : 0xc04f4000 - 0xc053e000 ( 296 kB) .data : 0xc053e000 - 0xc059b6c8 ( 374 kB) .bss : 0xc059b6c8 - 0xc05e5904 ( 297 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000005] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000335] Console: colour dummy device 80x30 [ 0.000631] console [tty0] enabled [ 0.000662] Calibrating delay loop... 1974.27 BogoMIPS (lpj=3948544) [ 0.016058] pid_max: default: 32768 minimum: 301 [ 0.016198] Security Framework initialized [ 0.016228] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.016351] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.016386] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.017073] CPU: Testing write buffer coherency: ok [ 0.017155] ftrace: allocating 16901 entries in 34 pages [ 0.037677] Setting up static identity map for 0x8200 - 0x823c [ 0.037842] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1 [ 0.039797] devtmpfs: initialized [ 0.042586] VFP support v0.3: not present [ 0.042733] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.042908] pinctrl core: initialized pinctrl subsystem [ 0.043647] NET: Registered protocol family 16 [ 0.043883] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.044859] cpuidle: using governor ladder [ 0.044891] cpuidle: using governor menu [ 0.045098] Feroceon L2: Enabling L2 [ 0.045142] Feroceon L2: Cache support initialised. [ 0.045317] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.045410] [Firmware Info]: /ocp@f1000000/ethernet-controller@76000/ethernet1-port@0: local-mac-address is not set [ 0.048232] No ATAGs? [ 0.051318] clocksource: Switched to clocksource orion_clocksource [ 0.059893] VFS: Disk quotas dquot_6.6.0 [ 0.059967] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.064916] NET: Registered protocol family 2 [ 0.065458] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.065522] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.065580] TCP: Hash tables configured (established 4096 bind 4096) [ 0.065631] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.065664] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.065807] NET: Registered protocol family 1 [ 0.065846] PCI: CLS 0 bytes, default 32 [ 0.065994] Unpacking initramfs... [ 0.376038] Freeing initrd memory: 9216K (c0a00000 - c1300000) [ 0.376498] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.376565] audit: initializing netlink subsys (disabled) [ 0.376631] audit: type=2000 audit(0.364:1): initialized [ 0.376914] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.376982] zbud: loaded [ 0.378061] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.378186] io scheduler noop registered [ 0.378245] io scheduler cfq registered (default) [ 0.379007] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 0.380188] mvebu-pcie mbus@f1000000:pcie-controller@82000000: PCI host bridge to bus 0000:00 [ 0.380235] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 0.380259] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 0.380284] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.380324] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400 [ 0.380464] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400 [ 0.380599] PCI: bus0: Fast back to back transfers disabled [ 0.380627] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.380665] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.380784] pci 0000:01:00.0: [11ab:7042] type 00 class 0x010000 [ 0.380809] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x900fffff 64bit] [ 0.380820] pci 0000:01:00.0: reg 0x18: [io 0xf0000000-0xf00000ff] [ 0.381008] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.381058] PCI: bus1: Fast back to back transfers disabled [ 0.381083] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.381151] PCI: bus2: Fast back to back transfers enabled [ 0.381177] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 0.381259] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff] [ 0.381287] pci 0000:00:01.0: BAR 7: assigned [io 0x10000-0x10fff] [ 0.381316] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit] [ 0.381360] pci 0000:01:00.0: BAR 2: assigned [io 0x10000-0x100ff] [ 0.381387] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.381409] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff] [ 0.381433] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 0.381458] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.381527] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 0.381858] mv_xor f1060800.xor: Marvell shared XOR driver [ 0.408052] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 0.408205] mv_xor f1060900.xor: Marvell shared XOR driver [ 0.436046] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 0.436309] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.436988] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A [ 7.540366] console [ttyS0] enabled [ 7.582482] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A [ 7.691127] mousedev: PS/2 mouse device common for all mice [ 8.779332] rtc-mv f1010300.rtc: internal RTC not ticking [ 8.844098] i2c /dev entries driver [ 10.923333] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 11.001520] rtc-s35390a 0-0030: error resetting chip [ 11.061160] rtc-s35390a: probe of 0-0030 failed with error -5 [ 11.130538] ledtrig-cpu: registered to indicate activity on CPUs [ 11.202795] NET: Registered protocol family 17 [ 11.256329] registered taskstats version 1 [ 11.305384] zswap: loaded using pool lzo/zbud [ 11.358174] hctosys: unable to open rtc device (rtc0) [ 11.419592] Freeing unused kernel memory: 296K (c04f4000 - c053e000) [ 11.495760] This architecture does not have kernel memory protection. [ 11.634849] random: udevadm: uninitialized urandom read (16 bytes read) [ 11.725467] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 11.816040] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 11.902171] random: udevadm: uninitialized urandom read (16 bytes read) [ 11.981545] random: udevadm: uninitialized urandom read (16 bytes read) [ 12.060940] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 12.147123] random: udevadm: uninitialized urandom read (16 bytes read) [ 12.231010] random: udevadm: uninitialized urandom read (16 bytes read) [ 12.310686] random: udevadm: uninitialized urandom read (16 bytes read) [ 12.390299] random: udevadm: uninitialized urandom read (16 bytes read) [ 12.573185] SCSI subsystem initialized [ 12.673073] libata version 3.00 loaded. [ 12.674222] sata_mv 0000:01:00.0: version 1.28 [ 12.674395] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx [ 12.879596] scsi host0: sata_mv [ 12.918028] scsi host1: sata_mv [ 12.956298] scsi host2: sata_mv [ 12.994635] scsi host3: sata_mv [ 13.032850] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 36 [ 13.124635] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 36 [ 13.216390] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 36 [ 13.308154] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 36 [ 13.401073] sata_mv f1080000.sata: version 1.28 [ 13.401256] sata_mv f1080000.sata: slots 32 ports 2 [ 13.463418] scsi host4: sata_mv [ 13.501829] scsi host5: sata_mv [ 13.540007] ata5: SATA max UDMA/133 irq 35 [ 13.589069] ata6: SATA max UDMA/133 irq 35 [ 13.931358] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 14.005482] ata5: SATA link down (SStatus 0 SControl F300) [ 14.073760] ata1.00: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133 [ 14.148822] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 14.237066] ata1.00: configured for UDMA/133 [ 14.288478] scsi 0:0:0:0: Direct-Access ATA ST4000VN008-2DR1 SC60 PQ: 0 ANSI: 5 [ 14.859391] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 14.938205] ata2.00: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133 [ 15.013246] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 15.099424] ata2.00: configured for UDMA/133 [ 15.150800] scsi 1:0:0:0: Direct-Access ATA ST4000VN008-2DR1 SC60 PQ: 0 ANSI: 5 [ 15.719357] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 15.817826] ata3.00: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133 [ 15.892876] ata3.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 15.997549] random: fast init done [ 16.042998] ata3.00: configured for UDMA/133 [ 16.094389] scsi 2:0:0:0: Direct-Access ATA ST4000VN008-2DR1 SC60 PQ: 0 ANSI: 5 [ 17.863357] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 17.942128] ata4.00: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133 [ 18.017222] ata4.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 18.126264] ata4.00: configured for UDMA/133 [ 18.177692] scsi 3:0:0:0: Direct-Access ATA ST4000VN008-2DR1 SC60 PQ: 0 ANSI: 5 [ 18.589633] ata6: SATA link down (SStatus 0 SControl F300) [ 18.690650] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 18.783451] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 18.846262] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 18.939059] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 19.001884] sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 19.094671] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 19.157534] sd 3:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 19.250391] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 19.328024] sd 2:0:0:0: [sdc] Write Protect is off [ 19.385374] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 19.385387] sd 1:0:0:0: [sdb] Write Protect is off [ 19.442753] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 19.442764] sd 0:0:0:0: [sda] Write Protect is off [ 19.500145] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 19.500221] sd 3:0:0:0: [sdd] Write Protect is off [ 19.557643] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 19.557794] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.666198] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.774656] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.883113] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.053438] sdc: sdc1 sdc2 [ 20.087718] sdb: sdb1 sdb2 [ 20.121329] sda: sda1 sda2 [ 20.158360] sdd: sdd1 sdd2 [ 20.192928] sd 2:0:0:0: [sdc] Attached SCSI disk [ 20.262289] sd 0:0:0:0: [sda] Attached SCSI disk [ 20.322977] sd 1:0:0:0: [sdb] Attached SCSI disk [ 20.378758] sd 3:0:0:0: [sdd] Attached SCSI disk [ 20.445453] elevator: type deadline not found [ 20.497591] elevator: switch to deadline failed [ 20.738366] md: bind<sda1> [ 20.835344] md: bind<sda2> [ 20.885357] md: bind<sdb1> [ 20.922371] md: bind<sdd1> [ 20.959515] random: crng init done [ 21.004741] md: bind<sdd2> [ 21.044112] md: bind<sdc1> [ 21.151498] raid6: int32x1 gen() 142 MB/s [ 21.267524] raid6: int32x1 xor() 102 MB/s [ 21.383541] raid6: int32x2 gen() 184 MB/s [ 21.499439] raid6: int32x2 xor() 145 MB/s [ 21.615329] raid6: int32x4 gen() 196 MB/s [ 21.731415] raid6: int32x4 xor() 135 MB/s [ 21.847483] raid6: int32x8 gen() 206 MB/s [ 21.963471] raid6: int32x8 xor() 141 MB/s [ 22.014567] raid6: using algorithm int32x8 gen() 206 MB/s [ 22.079245] raid6: .... xor() 141 MB/s, rmw enabled [ 22.137677] raid6: using intx1 recovery algorithm [ 22.194876] md: bind<sdc2> [ 22.230528] async_tx: api initialized (async) [ 22.290479] md: bind<sdb2> [ 22.323933] xor: measuring software checksum speed [ 22.419321] arm4regs : 1806.000 MB/sec [ 22.507324] 8regs : 1085.000 MB/sec [ 22.595321] 32regs : 1577.000 MB/sec [ 22.645354] xor: using function: arm4regs (1806.000 MB/sec) [ 22.732279] md: raid6 personality registered for level 6 [ 22.795883] md: raid5 personality registered for level 5 [ 22.859515] md: raid4 personality registered for level 4 [ 22.924309] md/raid:md1: device sdb2 operational as raid disk 1 [ 22.995246] md/raid:md1: device sdc2 operational as raid disk 2 [ 23.066163] md/raid:md1: device sdd2 operational as raid disk 3 [ 23.137093] md/raid:md1: device sda2 operational as raid disk 0 [ 23.208129] md/raid:md0: device sdc1 operational as raid disk 2 [ 23.279073] md/raid:md0: device sdd1 operational as raid disk 3 [ 23.349998] md/raid:md0: device sdb1 operational as raid disk 1 [ 23.420929] md/raid:md0: device sda1 operational as raid disk 0 [ 23.492953] md/raid:md1: allocated 4298kB [ 23.542019] md/raid:md0: allocated 4298kB [ 23.590106] md/raid:md1: raid level 5 active with 4 out of 4 devices, algorithm 2 [ 23.679785] RAID conf printout: [ 23.679788] --- level:5 rd:4 wd:4 [ 23.679791] disk 0, o:1, dev:sda2 [ 23.679794] disk 1, o:1, dev:sdb2 [ 23.679796] disk 2, o:1, dev:sdc2 [ 23.679799] disk 3, o:1, dev:sdd2 [ 23.679829] md/raid:md0: raid level 6 active with 4 out of 4 devices, algorithm 2 [ 23.769464] RAID conf printout: [ 23.769467] --- level:6 rd:4 wd:4 [ 23.769470] disk 0, o:1, dev:sda1 [ 23.769472] disk 1, o:1, dev:sdb1 [ 23.769475] disk 2, o:1, dev:sdc1 [ 23.769477] disk 3, o:1, dev:sdd1 [ 23.769790] created bitmap (21 pages) for device md1 [ 23.829320] created bitmap (9 pages) for device md0 [ 23.889696] md0: bitmap initialized from disk: read 1 pages, set 0 of 17982 bits [ 23.982607] md1: bitmap initialized from disk: read 2 pages, set 0 of 41631 bits [ 24.111462] md0: detected capacity change from 0 to 2413503184896 [ 24.203627] md1: detected capacity change from 0 to 8381296803840 [ 24.278577] md0: p1 p2 p3 [ 24.380632] md1: p1 [ 24.753692] md: linear personality registered for level -1 [ 24.833977] md: multipath personality registered for level -4 [ 24.919542] md: raid0 personality registered for level 0 [ 24.991475] md: raid1 personality registered for level 1 [ 25.076294] md: raid10 personality registered for level 10 [ 25.856070] EXT4-fs (md0p2): mounted filesystem with ordered data mode. Opts: (null) [ 27.353583] systemd[1]: System time before build time, advancing clock. [ 27.656759] NET: Registered protocol family 10 [ 27.742689] ip_tables: (C) 2000-2006 Netfilter Core Team [ 27.881310] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 28.097374] systemd[1]: Detected architecture arm. [ 28.291197] systemd[1]: Set hostname to <QNAP-TS419>. [ 29.538747] systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service is masked. [ 29.678984] systemd[1]: Listening on fsck to fsckd communication Socket. [ 29.835640] systemd[1]: Listening on udev Control Socket. [ 29.959584] systemd[1]: Listening on Syslog Socket. [ 30.075564] systemd[1]: Listening on udev Kernel Socket. [ 30.199679] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 30.388143] systemd[1]: Created slice System Slice. [ 30.657862] RPC: Registered named UNIX socket transport module. [ 30.730066] RPC: Registered udp transport module. [ 30.786396] RPC: Registered tcp transport module. [ 30.842744] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 31.272084] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 31.694557] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 31.856340] EXT4-fs (md0p2): re-mounted. Opts: errors=remount-ro [ 33.788067] systemd-journald[230]: Received request to flush runtime journal from PID 1 [ 34.412416] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 34.503747] m25p80 spi0.0: m25p128 (16384 Kbytes) [ 34.576146] orion_wdt: Initial timeout 21 sec [ 34.667486] libphy: Fixed MDIO Bus: probed [ 34.735098] usbcore: registered new interface driver usbfs [ 34.839498] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 34.903452] libphy: orion_mdio_bus: probed [ 34.960531] 6 ofpart partitions found on MTD device spi0.0 [ 35.026257] Creating 6 MTD partitions on "spi0.0": [ 35.115429] usbcore: registered new interface driver hub [ 35.219605] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 35.313301] marvell-cesa f1030000.crypto: CESA device successfully registered [ 35.424046] usbcore: registered new device driver usb [ 35.519353] 0x000000000000-0x000000080000 : "U-Boot" [ 35.578969] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 35.686713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 35.778169] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 35.877632] io scheduler deadline registered [ 35.985261] 0x000000200000-0x000000400000 : "Kernel" [ 36.187837] ehci-orion: EHCI orion driver [ 36.243254] kirkwood-pinctrl f1010000.pin-controller: pin PIN20 already requested by f1080000.sata; cannot claim for f1076000.ethernet-controller [ 36.399719] kirkwood-pinctrl f1010000.pin-controller: pin-20 (f1076000.ethernet-controller) status -22 [ 36.511281] kirkwood-pinctrl f1010000.pin-controller: could not request pin 20 (PIN20) from group mpp20 on device f1010000.pin-controller [ 36.660310] mv643xx_eth f1076000.ethernet-controller: Error applying setting, reverse things back [ 36.782806] 0x000000400000-0x000000d00000 : "RootFS1" [ 37.137378] ata3.00: configured for UDMA/133 [ 37.188520] ata3: EH complete [ 37.229208] ata1.00: configured for UDMA/133 [ 37.280384] ata1: EH complete [ 37.316336] ata2.00: configured for UDMA/133 [ 37.367453] ata2: EH complete [ 37.422105] ata4.00: configured for UDMA/133 [ 37.473289] ata4: EH complete [ 37.547890] 0x000000d00000-0x000001000000 : "RootFS2" [ 37.651136] 0x000000080000-0x0000000c0000 : "U-Boot Config" [ 37.729045] 0x0000000c0000-0x000000200000 : "NAS Config" [ 37.836744] mv643xx_eth: probe of f1076000.ethernet-controller failed with error -22 [ 37.935686] orion-ehci f1050000.ehci: EHCI Host Controller [ 38.009633] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 38.106565] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000 [ 38.179564] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:08:9b:cb:ae:be [ 38.311369] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 38.831621] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 38.913058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.999658] usb usb1: Product: EHCI Host Controller [ 39.058057] usb usb1: Manufacturer: Linux 4.9.0-1-marvell ehci_hcd [ 39.132113] usb usb1: SerialNumber: f1050000.ehci [ 39.199070] hub 1-0:1.0: USB hub found [ 39.250728] hub 1-0:1.0: 1 port detected [ 39.695336] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 39.934123] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 40.021906] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 40.124057] usb 1-1: Product: USB2.0 Hub [ 40.187082] hub 1-1:1.0: USB hub found [ 40.254462] hub 1-1:1.0: 4 ports detected [ 40.324915] Adding 1503072k swap on /dev/md0p3. Priority:-1 extents:1 across:1503072k FS [ 40.615352] usb 1-1.4: new high-speed USB device number 3 using orion-ehci [ 40.823818] usb 1-1.4: New USB device found, idVendor=04c5, idProduct=2028 [ 40.923113] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 41.027338] usb 1-1.4: Product: MYS513 [ 41.088866] usb 1-1.4: Manufacturer: FUJITSU [ 41.156677] usb 1-1.4: SerialNumber: 1212060000000732 [ 41.447642] usb-storage 1-1.4:1.0: USB Mass Storage device detected [ 41.528048] scsi host6: usb-storage 1-1.4:1.0 [ 41.587918] usbcore: registered new interface driver usb-storage [ 41.725143] usbcore: registered new interface driver uas [ 43.494936] EXT4-fs (md1p1): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 43.871937] EXT4-fs (md0p1): mounting ext2 file system using the ext4 subsystem [ 44.051751] EXT4-fs (md0p1): mounted filesystem without journal. Opts: (null) [ 44.998353] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 47.204138] scsi 6:0:0:0: Direct-Access FUJITSU U3 0001 PQ: 0 ANSI: 6 [ 47.452040] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 47.569862] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ** Model information Hardware : Marvell Kirkwood (Flattened Device Tree) Revision : 0000 Device Tree model: QNAP TS419 family ** Loaded modules: uas usb_storage ehci_orion deadline_iosched ehci_hcd marvell mv643xx_eth marvell_cesa usbcore mvmdio of_mdio des_generic usb_common fixed_phy libphy orion_wdt m25p80 spi_nor sg kirkwood_thermal evdev gpio_keys nfsd auth_rpcgss oid_registry nfs_acl lockd grace sunrpc ip_tables x_tables ipv6 autofs4 ext4 crc16 jbd2 fscrypto ecb mbcache raid10 raid1 raid0 multipath linear raid456 libcrc32c crc32c_generic async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq md_mod sd_mod sata_mv libata scsi_mod ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 00:08:9b:cb:ae:be brd ff:ff:ff:ff:ff:ff inet 192.168.1.100/24 brd 192.168.1.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::208:9bff:fecb:aebe/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 10382 175 0 0 0 0 0 0 10382 175 0 0 0 0 0 0 eth0: 4123873241 14467723 0 0 0 0 0 0 181285408 2587783 0 0 0 0 0 0 *** Protocol statistics: Ip: Forwarding: 1 14096511 total packets received 0 forwarded 282 with unknown protocol 0 incoming packets discarded 14096164 incoming packets delivered 2584036 requests sent out 46 dropped because of missing route Icmp: 21 ICMP messages received 2 input ICMP message failed ICMP input histogram: destination unreachable: 21 19 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 19 IcmpMsg: InType3: 21 OutType3: 19 Tcp: 2977 active connection openings 5 passive connection openings 0 failed connection attempts 148 connection resets received 11 connections established 14091472 segments received 2584340 segments sent out 246 segments retransmitted 0 bad segments received 561 resets sent Udp: 3054 packets received 0 packets to unknown port received 0 packet receive errors 2315 packets sent 0 receive buffer errors 0 send buffer errors IgnoredMulti: 1731 UdpLite: TcpExt: 1 invalid SYN cookies received 3 packets pruned from receive queue because of socket buffer overrun 17 ICMP packets dropped because they were out-of-window 2511 TCP sockets finished time wait in fast timer 686214 delayed acks sent 302 delayed acks further delayed because of locked socket Quick ack mode was activated 1424 times 192507 packets directly queued to recvmsg prequeue 68783 bytes directly in process context from backlog TCPDirectCopyFromPrequeue: 190214333 8454797 packet headers predicted 135041 packet headers predicted and directly queued to user 7915 acknowledgments not containing data payload received 27790 predicted acknowledgments TCPSackRecovery: 6 TCPDSACKUndo: 4 4 congestion windows recovered without slow start after partial ack 6 fast retransmits TCPTimeouts: 20 TCPLossProbes: 202 TCPLossProbeRecovery: 157 10 times receiver scheduled too late for direct processing 3 packets collapsed in receive queue due to low socket buffer TCPDSACKOldSent: 1425 TCPDSACKOfoSent: 9 TCPDSACKRecv: 21 TCPDSACKOfoRecv: 1 3 connections reset due to unexpected data 127 connections reset due to early user close 3 connections aborted due to timeout TCPDSACKIgnoredNoUndo: 2 TCPSackMerged: 4 TCPSackShiftFallback: 16 TCPRcvCoalesce: 13062132 TCPOFOQueue: 113306 TCPOFOMerge: 9 TCPAutoCorking: 82 TCPFromZeroWindowAdv: 4958 TCPToZeroWindowAdv: 4958 TCPWantZeroWindowAdv: 19073 TCPSynRetrans: 18 TCPOrigDataSent: 44463 TCPHystartTrainDetect: 1 TCPHystartTrainCwnd: 24 TCPKeepAlive: 30 IpExt: InNoRoutes: 65 InMcastPkts: 289 InBcastPkts: 2484 OutBcastPkts: 218 InOctets: 21024090301 OutOctets: 144883012 InMcastOctets: 9248 InBcastOctets: 455316 OutBcastOctets: 33964 InNoECTPkts: 14465213 ** PCI devices: 00:01.0 PCI bridge [0604]: Marvell Technology Group Ltd. Device [11ab:6282] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00010000-00010fff Memory behind bridge: e0000000-e00fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- 00:02.0 PCI bridge [0604]: Marvell Technology Group Ltd. Device [11ab:6282] (rev 01) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- 01:00.0 SCSI storage controller [0100]: Marvell Technology Group Ltd. 88SX7042 PCI-e 4-port SATA-II [11ab:7042] (rev 02) Subsystem: Marvell Technology Group Ltd. 88SX7042 PCI-e 4-port SATA-II [11ab:11ab] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 36 Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=1M] Region 2: I/O ports at 10000 [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Exit Latency L0s <256ns, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Kernel driver in use: sata_mv Kernel modules: sata_mv ** USB devices: Bus 001 Device 004: ID 04c5:2028 Fujitsu, Ltd Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 9.0 APT prefers testing APT policy: (500, 'testing') Architecture: armel (armv5tel) Kernel: Linux 4.9.0-1-marvell Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.9.0-1-marvell depends on: ii initramfs-tools [linux-initramfs-tool] 0.127 ii kmod 23-2 ii linux-base 4.5 Versions of packages linux-image-4.9.0-1-marvell recommends: ii firmware-linux-free 3.4 ii u-boot-tools 2016.11+dfsg1-3 Versions of packages linux-image-4.9.0-1-marvell suggests: pn debian-kernel-handbook <none> pn linux-doc-4.9 <none> Versions of packages linux-image-4.9.0-1-marvell is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information