Package: debian-installer Version: RC3 Severity: normal Dear Maintainer,
After performing an installation of Stretch RC3, the installation will not boot. The problem is that grub is not being invoked correctly. My hardware is two SATA drives configured as a single RAID1 array and this array used for one lvm volume group. Root (which contains /boot and /usr) is one logical volume. At the end of the installation I used the installer interface to write the MBR to BOTH /dev/sda and /dev/sdb. To fix the problem, I used the installer cd to go into recovery mode. In this mode I was able to write the MBR to /dev/sda and /dev/sdb and the installation now boots normally. My hardware is intel 64 bit on an ASUS mobo. The kernel is vmlinuz-4.9.0-2-amd64. -- System Information: Debian Release: 9.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0-2-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.ISO88591, LC_CTYPE=en_US.ISO88591 (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system)