control: tag -1 +moreinfo

Hello,

Here is a review of 5a5d084bf540c903d4ea19f9761da2d6b38b3907:

- It FTBFS.  I've attached a log.

- New file d/clean not mentioned in changelog.

- Changelog typo "priastine-tar".

- Did you run `wrap-and-sort`?  It's conventional to say in the
  changelog that you ran it, giving the options you used, so someone
  else can run it with the same options if they do an NMU/etc.

- I think that the "Manpage" section of the changelog could be clearer.
  You don't mention the new filename "manpage.txt", and you don't
  mention that you're now using txt2man (except in the d/control
  changes).

- The patch header of 01_ could be enhanced with an explanation of why
  the third_party dir is included (I think I can guess, but it would be
  better explicitly stated)

- Have you forwarded 02_ upstream?  The DEP-3 patch header format can
  make this easier to indicate.

- If you want to keep the "# you guessed :)" I think it would be best to
  use DEP-3's Description: field, otherwise it's not obvious why the
  comment line is there.

- Patch 04_ definitely needs an explanation in the patch header as to
  why it's a good idea to strip it

- Are you sure the upstream license is GPL-2, not GPL-2+?

- src/xoroshiro128plus.h, m4/lib-ld.m4 missing from d/copyright

An optional wishlist item:

- crc32tbl.h is a generated file, and ideally it would be regenerated
  during the package build.

If you're able to address the issues I've raised in this message, please
remove the moreinfo tag in this bug, and don't forget to re-run `dch -r`
to refresh the changelog timestamp.

-- 
Sean Whitton
sbuild (Debian sbuild) 0.73.0 (23 Dec 2016) on zephyr.silentflame.com

+==============================================================================+
| sysbench 1.0.6+ds-1 (i386)                   Fri, 19 May 2017 06:58:44 +0000 |
+==============================================================================+

Package: sysbench
Version: 1.0.6+ds-1
Source Version: 1.0.6+ds-1
Distribution: experimental
Machine Architecture: i386
Host Architecture: i386
Build Architecture: i386
Build Type: binary

I: NOTICE: Log filtering will replace 
'var/run/schroot/mount/unstable-i386-sbuild-afa975e8-4d29-4456-8230-88a7e11336b9'
 with '<<CHROOT>>'

+------------------------------------------------------------------------------+
| Update chroot                                                                |
+------------------------------------------------------------------------------+

Get:1 http://cdn-fastly.deb.debian.org/debian unstable InRelease [237 kB]
Get:2 http://cdn-fastly.deb.debian.org/debian unstable/main Sources.diff/Index 
[27.9 kB]
Get:3 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
Packages.diff/Index [27.9 kB]
Get:4 http://cdn-fastly.deb.debian.org/debian unstable/main Sources 
2017-05-18-0829.06.pdiff [2941 B]
Get:5 http://cdn-fastly.deb.debian.org/debian unstable/main Sources 
2017-05-18-1430.00.pdiff [3398 B]
Get:6 http://cdn-fastly.deb.debian.org/debian unstable/main Sources 
2017-05-18-2029.20.pdiff [3961 B]
Get:7 http://cdn-fastly.deb.debian.org/debian unstable/main Sources 
2017-05-19-0229.06.pdiff [851 B]
Get:7 http://cdn-fastly.deb.debian.org/debian unstable/main Sources 
2017-05-19-0229.06.pdiff [851 B]
Get:8 http://cdn-fastly.deb.debian.org/debian unstable/main i386 Packages 
2017-05-18-0829.06.pdiff [4548 B]
Get:9 http://cdn-fastly.deb.debian.org/debian unstable/main i386 Packages 
2017-05-18-1430.00.pdiff [1848 B]
Get:10 http://cdn-fastly.deb.debian.org/debian unstable/main i386 Packages 
2017-05-18-2029.20.pdiff [2917 B]
Get:11 http://cdn-fastly.deb.debian.org/debian unstable/main i386 Packages 
2017-05-19-0229.06.pdiff [33.9 kB]
Get:11 http://cdn-fastly.deb.debian.org/debian unstable/main i386 Packages 
2017-05-19-0229.06.pdiff [33.9 kB]
Fetched 347 kB in 4s (79.3 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
  dpkg dpkg-dev libdpkg-perl
3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 5009 kB of archives.
After this operation, 105 kB of additional disk space will be used.
Get:1 http://cdn-fastly.deb.debian.org/debian unstable/main i386 dpkg i386 
1.18.24 [2134 kB]
Get:2 http://cdn-fastly.deb.debian.org/debian unstable/main i386 dpkg-dev all 
1.18.24 [1592 kB]
Get:3 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libdpkg-perl 
all 1.18.24 [1283 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 5009 kB in 4s (1079 kB/s)
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11542 files and directories currently installed.)
Preparing to unpack .../archives/dpkg_1.18.24_i386.deb ...
Unpacking dpkg (1.18.24) over (1.18.23) ...
Setting up dpkg (1.18.24) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 11542 files and directories currently installed.)
Preparing to unpack .../dpkg-dev_1.18.24_all.deb ...
Unpacking dpkg-dev (1.18.24) over (1.18.23) ...
Preparing to unpack .../libdpkg-perl_1.18.24_all.deb ...
Unpacking libdpkg-perl (1.18.24) over (1.18.23) ...
Setting up libdpkg-perl (1.18.24) ...
Setting up dpkg-dev (1.18.24) ...

+------------------------------------------------------------------------------+
| Fetch source files                                                           |
+------------------------------------------------------------------------------+


Local sources
-------------

/home/swhitton/rfs/sysbench_1.0.6+ds-1.dsc exists in /home/swhitton/rfs; 
copying to chroot
I: NOTICE: Log filtering will replace 'build/sysbench-nOM0zk/sysbench-1.0.6+ds' 
with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/sysbench-nOM0zk' with 
'<<BUILDDIR>>'

+------------------------------------------------------------------------------+
| Install build-essential                                                      |
+------------------------------------------------------------------------------+


Setup apt archive
-----------------

Merged Build-Depends: build-essential, fakeroot
Filtered Build-Depends: build-essential, fakeroot
dpkg-deb: building package 'sbuild-build-depends-core-dummy' in 
'/<<BUILDDIR>>/resolver-22VoyG/apt_archive/sbuild-build-depends-core-dummy.deb'.
dpkg-scanpackages: warning: Packages in archive but missing from override file:
dpkg-scanpackages: warning:   sbuild-build-depends-core-dummy
dpkg-scanpackages: info: Wrote 1 entries to output Packages file.
Ign:1 copy:/<<BUILDDIR>>/resolver-22VoyG/apt_archive ./ InRelease
Get:2 copy:/<<BUILDDIR>>/resolver-22VoyG/apt_archive ./ Release [957 B]
Ign:3 copy:/<<BUILDDIR>>/resolver-22VoyG/apt_archive ./ Release.gpg
Get:4 copy:/<<BUILDDIR>>/resolver-22VoyG/apt_archive ./ Sources [349 B]
Get:5 copy:/<<BUILDDIR>>/resolver-22VoyG/apt_archive ./ Packages [431 B]
Fetched 1737 B in 0s (52.0 kB/s)
Reading package lists...
Reading package lists...

Install core build dependencies (apt-based resolver)
----------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
  sbuild-build-depends-core-dummy
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 784 B of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 copy:/<<BUILDDIR>>/resolver-22VoyG/apt_archive ./ 
sbuild-build-depends-core-dummy 0.invalid.0 [784 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 784 B in 0s (0 B/s)
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ... 11542 files and directories currently installed.)
Preparing to unpack .../sbuild-build-depends-core-dummy_0.invalid.0_i386.deb ...
Unpacking sbuild-build-depends-core-dummy (0.invalid.0) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...

+------------------------------------------------------------------------------+
| Check architectures                                                          |
+------------------------------------------------------------------------------+

Arch check ok (i386 included in any)

+------------------------------------------------------------------------------+
| Install package build dependencies                                           |
+------------------------------------------------------------------------------+


Setup apt archive
-----------------

Merged Build-Depends: dh-autoreconf, debhelper (>= 10), 
default-libmysqlclient-dev, docbook-xml, docbook-xsl, libaio-dev, libck-dev, 
libluajit-5.1-dev, libpq-dev, pkg-config, python-cram, txt2man, vim-common, 
xsltproc
Filtered Build-Depends: dh-autoreconf, debhelper (>= 10), 
default-libmysqlclient-dev, docbook-xml, docbook-xsl, libaio-dev, libck-dev, 
libluajit-5.1-dev, libpq-dev, pkg-config, python-cram, txt2man, vim-common, 
xsltproc
dpkg-deb: building package 'sbuild-build-depends-sysbench-dummy' in 
'/<<BUILDDIR>>/resolver-22VoyG/apt_archive/sbuild-build-depends-sysbench-dummy.deb'.
dpkg-scanpackages: warning: Packages in archive but missing from override file:
dpkg-scanpackages: warning:   sbuild-build-depends-core-dummy 
sbuild-build-depends-sysbench-dummy
dpkg-scanpackages: info: Wrote 2 entries to output Packages file.
Ign:1 copy:/<<BUILDDIR>>/resolver-22VoyG/apt_archive ./ InRelease
Get:2 copy:/<<BUILDDIR>>/resolver-22VoyG/apt_archive ./ Release [963 B]
Ign:3 copy:/<<BUILDDIR>>/resolver-22VoyG/apt_archive ./ Release.gpg
Get:4 copy:/<<BUILDDIR>>/resolver-22VoyG/apt_archive ./ Sources [591 B]
Get:5 copy:/<<BUILDDIR>>/resolver-22VoyG/apt_archive ./ Packages [669 B]
Fetched 2223 B in 0s (0 B/s)
Reading package lists...
Reading package lists...

Install sysbench build dependencies (apt-based resolver)
--------------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  autoconf automake autopoint autotools-dev bsdmainutils debhelper
  default-libmysqlclient-dev dh-autoreconf dh-strip-nondeterminism docbook-xml
  docbook-xsl file gawk gettext gettext-base groff-base intltool-debian
  libaio-dev libaio1 libarchive-zip-perl libbsd0 libck-dev libck0 libcroco3
  libexpat1 libffi6 libfile-stripnondeterminism-perl libglib2.0-0 libgnutls30
  libgssapi-krb5-2 libhogweed4 libicu57 libidn11 libk5crypto3 libkeyutils1
  libkrb5-3 libkrb5support0 libldap-2.4-2 libldap-common libluajit-5.1-2
  libluajit-5.1-common libluajit-5.1-dev libmagic-mgc libmagic1
  libmariadbclient-dev libmariadbclient-dev-compat libmariadbclient18
  libnettle6 libp11-kit0 libpipeline1 libpq-dev libpq5 libpython-stdlib
  libpython2.7-minimal libpython2.7-stdlib libreadline7 libsasl2-2
  libsasl2-modules-db libsigsegv2 libsqlite3-0 libssl1.1 libtasn1-6
  libtimedate-perl libtool libunistring0 libxml2 libxslt1.1 m4 man-db
  mime-support mysql-common pkg-config po-debconf python python-cram
  python-minimal python2.7 python2.7-minimal readline-common sgml-base
  sgml-data txt2man vim-common xml-core xsltproc xxd zlib1g-dev
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois
  vacation dh-make docbook docbook-dsssl docbook-defguide dbtoepub
  docbook-xsl-doc-html | docbook-xsl-doc-pdf | docbook-xsl-doc-text
  | docbook-xsl-doc docbook-xsl-saxon fop libsaxon-java libxalan2-java
  libxslthl-java xalan gawk-doc gettext-doc libasprintf-dev libgettextpo-dev
  groff gnutls-bin krb5-doc krb5-user postgresql-doc-9.6 libtool-doc gfortran
  | fortran95-compiler gcj-jdk m4-doc less www-browser libmail-box-perl
  python-doc python-tk python2.7-doc binfmt-support readline-doc sgml-base-doc
  perlsgml w3-recs opensp libxml2-utils
Recommended packages:
  curl | wget | lynx-cur libglib2.0-data shared-mime-info xdg-user-dirs
  krb5-locales libsasl2-modules libltdl-dev libmail-sendmail-perl vim
  | vim-gtk | vim-gtk3 | vim-athena | vim-nox | vim-tiny
The following NEW packages will be installed:
  autoconf automake autopoint autotools-dev bsdmainutils debhelper
  default-libmysqlclient-dev dh-autoreconf dh-strip-nondeterminism docbook-xml
  docbook-xsl file gawk gettext gettext-base groff-base intltool-debian
  libaio-dev libaio1 libarchive-zip-perl libbsd0 libck-dev libck0 libcroco3
  libexpat1 libffi6 libfile-stripnondeterminism-perl libglib2.0-0 libgnutls30
  libgssapi-krb5-2 libhogweed4 libicu57 libidn11 libk5crypto3 libkeyutils1
  libkrb5-3 libkrb5support0 libldap-2.4-2 libldap-common libluajit-5.1-2
  libluajit-5.1-common libluajit-5.1-dev libmagic-mgc libmagic1
  libmariadbclient-dev libmariadbclient-dev-compat libmariadbclient18
  libnettle6 libp11-kit0 libpipeline1 libpq-dev libpq5 libpython-stdlib
  libpython2.7-minimal libpython2.7-stdlib libreadline7 libsasl2-2
  libsasl2-modules-db libsigsegv2 libsqlite3-0 libssl1.1 libtasn1-6
  libtimedate-perl libtool libunistring0 libxml2 libxslt1.1 m4 man-db
  mime-support mysql-common pkg-config po-debconf python python-cram
  python-minimal python2.7 python2.7-minimal readline-common
  sbuild-build-depends-sysbench-dummy sgml-base sgml-data txt2man vim-common
  xml-core xsltproc xxd zlib1g-dev
0 upgraded, 88 newly installed, 0 to remove and 0 not upgraded.
Need to get 35.7 MB/35.7 MB of archives.
After this operation, 135 MB of additional disk space will be used.
Get:1 copy:/<<BUILDDIR>>/resolver-22VoyG/apt_archive ./ 
sbuild-build-depends-sysbench-dummy 0.invalid.0 [890 B]
Get:2 http://cdn-fastly.deb.debian.org/debian unstable/main i386 groff-base 
i386 1.22.3-9 [1186 kB]
Get:3 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libbsd0 i386 
0.8.3-1 [86.5 kB]
Get:4 http://cdn-fastly.deb.debian.org/debian unstable/main i386 bsdmainutils 
i386 9.0.12+nmu1 [189 kB]
Get:5 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libpipeline1 
i386 1.4.1-2 [29.6 kB]
Get:6 http://cdn-fastly.deb.debian.org/debian unstable/main i386 man-db i386 
2.7.6.1-2 [1054 kB]
Get:7 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libpython2.7-minimal i386 2.7.13-2 [389 kB]
Get:8 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
python2.7-minimal i386 2.7.13-2 [1422 kB]
Get:9 http://cdn-fastly.deb.debian.org/debian unstable/main i386 python-minimal 
i386 2.7.13-2 [40.5 kB]
Get:10 http://cdn-fastly.deb.debian.org/debian unstable/main i386 mime-support 
all 3.60 [36.7 kB]
Get:11 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libexpat1 
i386 2.2.0-2 [86.1 kB]
Get:12 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libffi6 i386 
3.2.1-6 [19.5 kB]
Get:13 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
readline-common all 7.0-3 [70.4 kB]
Get:14 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libreadline7 
i386 7.0-3 [155 kB]
Get:15 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libsqlite3-0 
i386 3.16.2-3 [606 kB]
Get:16 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libssl1.1 
i386 1.1.0e-2 [1337 kB]
Get:17 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libpython2.7-stdlib i386 2.7.13-2 [1916 kB]
Get:18 http://cdn-fastly.deb.debian.org/debian unstable/main i386 python2.7 
i386 2.7.13-2 [285 kB]
Get:19 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libpython-stdlib i386 2.7.13-2 [20.0 kB]
Get:20 http://cdn-fastly.deb.debian.org/debian unstable/main i386 python i386 
2.7.13-2 [154 kB]
Get:21 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libsigsegv2 
i386 2.10-5 [29.1 kB]
Get:22 http://cdn-fastly.deb.debian.org/debian unstable/main i386 gawk i386 
1:4.1.4+dfsg-1 [579 kB]
Get:23 http://cdn-fastly.deb.debian.org/debian unstable/main i386 sgml-base all 
1.29 [14.8 kB]
Get:24 http://cdn-fastly.deb.debian.org/debian unstable/main i386 xxd i386 
2:8.0.0197-4 [131 kB]
Get:25 http://cdn-fastly.deb.debian.org/debian unstable/main i386 vim-common 
all 2:8.0.0197-4 [159 kB]
Get:26 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libmagic-mgc 
i386 1:5.30-1 [222 kB]
Get:27 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libmagic1 
i386 1:5.30-1 [117 kB]
Get:28 http://cdn-fastly.deb.debian.org/debian unstable/main i386 file i386 
1:5.30-1 [63.9 kB]
Get:29 http://cdn-fastly.deb.debian.org/debian unstable/main i386 gettext-base 
i386 0.19.8.1-2 [122 kB]
Get:30 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libnettle6 
i386 3.3-1+b1 [209 kB]
Get:31 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libhogweed4 
i386 3.3-1+b1 [138 kB]
Get:32 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libidn11 i386 
1.33-1 [115 kB]
Get:33 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libp11-kit0 
i386 0.23.3-5 [115 kB]
Get:34 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libtasn1-6 
i386 4.10-1 [53.3 kB]
Get:35 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libgnutls30 
i386 3.5.8-5 [913 kB]
Get:36 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libkeyutils1 
i386 1.5.9-9 [12.7 kB]
Get:37 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libkrb5support0 i386 1.15-1 [63.6 kB]
Get:38 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libk5crypto3 
i386 1.15-1 [123 kB]
Get:39 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libkrb5-3 
i386 1.15-1 [336 kB]
Get:40 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libgssapi-krb5-2 i386 1.15-1 [164 kB]
Get:41 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libsasl2-modules-db i386 2.1.27~101-g0780600+dfsg-3 [69.2 kB]
Get:42 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libsasl2-2 
i386 2.1.27~101-g0780600+dfsg-3 [108 kB]
Get:43 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libldap-common all 2.4.44+dfsg-4 [84.8 kB]
Get:44 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libldap-2.4-2 
i386 2.4.44+dfsg-4+b1 [230 kB]
Get:45 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libicu57 i386 
57.1-6 [7844 kB]
Get:46 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libxml2 i386 
2.9.4+dfsg1-2.2 [954 kB]
Get:47 http://cdn-fastly.deb.debian.org/debian unstable/main i386 m4 i386 
1.4.18-1 [205 kB]
Get:48 http://cdn-fastly.deb.debian.org/debian unstable/main i386 autoconf all 
2.69-10 [338 kB]
Get:49 http://cdn-fastly.deb.debian.org/debian unstable/main i386 autotools-dev 
all 20161112.1 [73.4 kB]
Get:50 http://cdn-fastly.deb.debian.org/debian unstable/main i386 automake all 
1:1.15-6 [733 kB]
Get:51 http://cdn-fastly.deb.debian.org/debian unstable/main i386 autopoint all 
0.19.8.1-2 [433 kB]
Get:52 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libtool all 
2.4.6-2 [545 kB]
Get:53 http://cdn-fastly.deb.debian.org/debian unstable/main i386 dh-autoreconf 
all 14 [15.9 kB]
Get:54 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libarchive-zip-perl all 1.59-1 [95.5 kB]
Get:55 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libtimedate-perl all 2.3000-2 [42.2 kB]
Get:56 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libglib2.0-0 
i386 2.50.3-2 [2762 kB]
Get:57 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libcroco3 
i386 0.6.11-3 [149 kB]
Get:58 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libunistring0 
i386 0.9.6+really0.9.3-0.1 [285 kB]
Get:59 http://cdn-fastly.deb.debian.org/debian unstable/main i386 gettext i386 
0.19.8.1-2 [1504 kB]
Get:60 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
intltool-debian all 0.35.0+20060710.4 [26.3 kB]
Get:61 http://cdn-fastly.deb.debian.org/debian unstable/main i386 po-debconf 
all 1.0.20 [247 kB]
Get:62 http://cdn-fastly.deb.debian.org/debian unstable/main i386 debhelper all 
10.2.5 [961 kB]
Get:63 http://cdn-fastly.deb.debian.org/debian unstable/main i386 mysql-common 
all 5.8+1.0.2 [5608 B]
Get:64 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libmariadbclient18 i386 10.1.23-8 [763 kB]
Get:65 http://cdn-fastly.deb.debian.org/debian unstable/main i386 zlib1g-dev 
i386 1:1.2.8.dfsg-5 [207 kB]
Get:66 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libmariadbclient-dev i386 10.1.23-8 [1055 kB]
Get:67 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libmariadbclient-dev-compat i386 10.1.23-8 [25.7 kB]
Get:68 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
default-libmysqlclient-dev i386 1.0.2 [3270 B]
Get:69 http://cdn-fastly.deb.debian.org/debian unstable/main i386 xml-core all 
0.17 [23.2 kB]
Get:70 http://cdn-fastly.deb.debian.org/debian unstable/main i386 sgml-data all 
2.0.10 [181 kB]
Get:71 http://cdn-fastly.deb.debian.org/debian unstable/main i386 docbook-xml 
all 4.5-8 [84.7 kB]
Get:72 http://cdn-fastly.deb.debian.org/debian unstable/main i386 docbook-xsl 
all 1.79.1+dfsg-2 [1249 kB]
Get:73 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libaio1 i386 
0.3.110-3 [9730 B]
Get:74 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libaio-dev 
i386 0.3.110-3 [18.8 kB]
Get:75 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libck0 i386 
0.6.0-1 [23.2 kB]
Get:76 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libck-dev 
i386 0.6.0-1 [273 kB]
Get:77 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libluajit-5.1-common all 2.0.4+dfsg-1 [36.6 kB]
Get:78 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libluajit-5.1-2 i386 2.0.4+dfsg-1+b1 [217 kB]
Get:79 http://cdn-fastly.deb.debian.org/debian unstable/main i386 
libluajit-5.1-dev i386 2.0.4+dfsg-1+b1 [235 kB]
Get:80 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libpq5 i386 
9.6.3-1 [134 kB]
Get:81 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libpq-dev 
i386 9.6.3-1 [220 kB]
Get:82 http://cdn-fastly.deb.debian.org/debian unstable/main i386 libxslt1.1 
i386 1.1.29-2.1 [244 kB]
Get:83 http://cdn-fastly.deb.debian.org/debian unstable/main i386 pkg-config 
i386 0.29-4+b1 [64.6 kB]
Get:84 http://cdn-fastly.deb.debian.org/debian unstable/main i386 python-cram 
all 0.7-1 [16.6 kB]
Get:85 http://cdn-fastly.deb.debian.org/debian unstable/main i386 txt2man all 
1.6.0-1 [31.6 kB]
Get:86 http://cdn-fastly.deb.debian.org/debian unstable/main i386 xsltproc i386 
1.1.29-2.1 [120 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 35.7 MB in 26s (1328 kB/s)
Selecting previously unselected package groff-base.
(Reading database ... 11542 files and directories currently installed.)
Preparing to unpack .../00-groff-base_1.22.3-9_i386.deb ...
Unpacking groff-base (1.22.3-9) ...
Selecting previously unselected package libbsd0:i386.
Preparing to unpack .../01-libbsd0_0.8.3-1_i386.deb ...
Unpacking libbsd0:i386 (0.8.3-1) ...
Selecting previously unselected package bsdmainutils.
Preparing to unpack .../02-bsdmainutils_9.0.12+nmu1_i386.deb ...
Unpacking bsdmainutils (9.0.12+nmu1) ...
Selecting previously unselected package libpipeline1:i386.
Preparing to unpack .../03-libpipeline1_1.4.1-2_i386.deb ...
Unpacking libpipeline1:i386 (1.4.1-2) ...
Selecting previously unselected package man-db.
Preparing to unpack .../04-man-db_2.7.6.1-2_i386.deb ...
Unpacking man-db (2.7.6.1-2) ...
Selecting previously unselected package libpython2.7-minimal:i386.
Preparing to unpack .../05-libpython2.7-minimal_2.7.13-2_i386.deb ...
Unpacking libpython2.7-minimal:i386 (2.7.13-2) ...
Selecting previously unselected package python2.7-minimal.
Preparing to unpack .../06-python2.7-minimal_2.7.13-2_i386.deb ...
Unpacking python2.7-minimal (2.7.13-2) ...
Selecting previously unselected package python-minimal.
Preparing to unpack .../07-python-minimal_2.7.13-2_i386.deb ...
Unpacking python-minimal (2.7.13-2) ...
Selecting previously unselected package mime-support.
Preparing to unpack .../08-mime-support_3.60_all.deb ...
Unpacking mime-support (3.60) ...
Selecting previously unselected package libexpat1:i386.
Preparing to unpack .../09-libexpat1_2.2.0-2_i386.deb ...
Unpacking libexpat1:i386 (2.2.0-2) ...
Selecting previously unselected package libffi6:i386.
Preparing to unpack .../10-libffi6_3.2.1-6_i386.deb ...
Unpacking libffi6:i386 (3.2.1-6) ...
Selecting previously unselected package readline-common.
Preparing to unpack .../11-readline-common_7.0-3_all.deb ...
Unpacking readline-common (7.0-3) ...
Selecting previously unselected package libreadline7:i386.
Preparing to unpack .../12-libreadline7_7.0-3_i386.deb ...
Unpacking libreadline7:i386 (7.0-3) ...
Selecting previously unselected package libsqlite3-0:i386.
Preparing to unpack .../13-libsqlite3-0_3.16.2-3_i386.deb ...
Unpacking libsqlite3-0:i386 (3.16.2-3) ...
Selecting previously unselected package libssl1.1:i386.
Preparing to unpack .../14-libssl1.1_1.1.0e-2_i386.deb ...
Unpacking libssl1.1:i386 (1.1.0e-2) ...
Selecting previously unselected package libpython2.7-stdlib:i386.
Preparing to unpack .../15-libpython2.7-stdlib_2.7.13-2_i386.deb ...
Unpacking libpython2.7-stdlib:i386 (2.7.13-2) ...
Selecting previously unselected package python2.7.
Preparing to unpack .../16-python2.7_2.7.13-2_i386.deb ...
Unpacking python2.7 (2.7.13-2) ...
Selecting previously unselected package libpython-stdlib:i386.
Preparing to unpack .../17-libpython-stdlib_2.7.13-2_i386.deb ...
Unpacking libpython-stdlib:i386 (2.7.13-2) ...
Setting up libpython2.7-minimal:i386 (2.7.13-2) ...
Setting up python2.7-minimal (2.7.13-2) ...
Setting up python-minimal (2.7.13-2) ...
Selecting previously unselected package python.
(Reading database ... 12935 files and directories currently installed.)
Preparing to unpack .../python_2.7.13-2_i386.deb ...
Unpacking python (2.7.13-2) ...
Selecting previously unselected package libsigsegv2:i386.
Preparing to unpack .../libsigsegv2_2.10-5_i386.deb ...
Unpacking libsigsegv2:i386 (2.10-5) ...
Setting up readline-common (7.0-3) ...
Setting up libreadline7:i386 (7.0-3) ...
Setting up libsigsegv2:i386 (2.10-5) ...
Selecting previously unselected package gawk.
(Reading database ... 13006 files and directories currently installed.)
Preparing to unpack .../00-gawk_1%3a4.1.4+dfsg-1_i386.deb ...
Unpacking gawk (1:4.1.4+dfsg-1) ...
Selecting previously unselected package sgml-base.
Preparing to unpack .../01-sgml-base_1.29_all.deb ...
Unpacking sgml-base (1.29) ...
Selecting previously unselected package xxd.
Preparing to unpack .../02-xxd_2%3a8.0.0197-4_i386.deb ...
Unpacking xxd (2:8.0.0197-4) ...
Selecting previously unselected package vim-common.
Preparing to unpack .../03-vim-common_2%3a8.0.0197-4_all.deb ...
Unpacking vim-common (2:8.0.0197-4) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../04-libmagic-mgc_1%3a5.30-1_i386.deb ...
Unpacking libmagic-mgc (1:5.30-1) ...
Selecting previously unselected package libmagic1:i386.
Preparing to unpack .../05-libmagic1_1%3a5.30-1_i386.deb ...
Unpacking libmagic1:i386 (1:5.30-1) ...
Selecting previously unselected package file.
Preparing to unpack .../06-file_1%3a5.30-1_i386.deb ...
Unpacking file (1:5.30-1) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../07-gettext-base_0.19.8.1-2_i386.deb ...
Unpacking gettext-base (0.19.8.1-2) ...
Selecting previously unselected package libnettle6:i386.
Preparing to unpack .../08-libnettle6_3.3-1+b1_i386.deb ...
Unpacking libnettle6:i386 (3.3-1+b1) ...
Selecting previously unselected package libhogweed4:i386.
Preparing to unpack .../09-libhogweed4_3.3-1+b1_i386.deb ...
Unpacking libhogweed4:i386 (3.3-1+b1) ...
Selecting previously unselected package libidn11:i386.
Preparing to unpack .../10-libidn11_1.33-1_i386.deb ...
Unpacking libidn11:i386 (1.33-1) ...
Selecting previously unselected package libp11-kit0:i386.
Preparing to unpack .../11-libp11-kit0_0.23.3-5_i386.deb ...
Unpacking libp11-kit0:i386 (0.23.3-5) ...
Selecting previously unselected package libtasn1-6:i386.
Preparing to unpack .../12-libtasn1-6_4.10-1_i386.deb ...
Unpacking libtasn1-6:i386 (4.10-1) ...
Selecting previously unselected package libgnutls30:i386.
Preparing to unpack .../13-libgnutls30_3.5.8-5_i386.deb ...
Unpacking libgnutls30:i386 (3.5.8-5) ...
Selecting previously unselected package libkeyutils1:i386.
Preparing to unpack .../14-libkeyutils1_1.5.9-9_i386.deb ...
Unpacking libkeyutils1:i386 (1.5.9-9) ...
Selecting previously unselected package libkrb5support0:i386.
Preparing to unpack .../15-libkrb5support0_1.15-1_i386.deb ...
Unpacking libkrb5support0:i386 (1.15-1) ...
Selecting previously unselected package libk5crypto3:i386.
Preparing to unpack .../16-libk5crypto3_1.15-1_i386.deb ...
Unpacking libk5crypto3:i386 (1.15-1) ...
Selecting previously unselected package libkrb5-3:i386.
Preparing to unpack .../17-libkrb5-3_1.15-1_i386.deb ...
Unpacking libkrb5-3:i386 (1.15-1) ...
Selecting previously unselected package libgssapi-krb5-2:i386.
Preparing to unpack .../18-libgssapi-krb5-2_1.15-1_i386.deb ...
Unpacking libgssapi-krb5-2:i386 (1.15-1) ...
Selecting previously unselected package libsasl2-modules-db:i386.
Preparing to unpack 
.../19-libsasl2-modules-db_2.1.27~101-g0780600+dfsg-3_i386.deb ...
Unpacking libsasl2-modules-db:i386 (2.1.27~101-g0780600+dfsg-3) ...
Selecting previously unselected package libsasl2-2:i386.
Preparing to unpack .../20-libsasl2-2_2.1.27~101-g0780600+dfsg-3_i386.deb ...
Unpacking libsasl2-2:i386 (2.1.27~101-g0780600+dfsg-3) ...
Selecting previously unselected package libldap-common.
Preparing to unpack .../21-libldap-common_2.4.44+dfsg-4_all.deb ...
Unpacking libldap-common (2.4.44+dfsg-4) ...
Selecting previously unselected package libldap-2.4-2:i386.
Preparing to unpack .../22-libldap-2.4-2_2.4.44+dfsg-4+b1_i386.deb ...
Unpacking libldap-2.4-2:i386 (2.4.44+dfsg-4+b1) ...
Selecting previously unselected package libicu57:i386.
Preparing to unpack .../23-libicu57_57.1-6_i386.deb ...
Unpacking libicu57:i386 (57.1-6) ...
Selecting previously unselected package libxml2:i386.
Preparing to unpack .../24-libxml2_2.9.4+dfsg1-2.2_i386.deb ...
Unpacking libxml2:i386 (2.9.4+dfsg1-2.2) ...
Selecting previously unselected package m4.
Preparing to unpack .../25-m4_1.4.18-1_i386.deb ...
Unpacking m4 (1.4.18-1) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../26-autoconf_2.69-10_all.deb ...
Unpacking autoconf (2.69-10) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../27-autotools-dev_20161112.1_all.deb ...
Unpacking autotools-dev (20161112.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../28-automake_1%3a1.15-6_all.deb ...
Unpacking automake (1:1.15-6) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../29-autopoint_0.19.8.1-2_all.deb ...
Unpacking autopoint (0.19.8.1-2) ...
Selecting previously unselected package libtool.
Preparing to unpack .../30-libtool_2.4.6-2_all.deb ...
Unpacking libtool (2.4.6-2) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../31-dh-autoreconf_14_all.deb ...
Unpacking dh-autoreconf (14) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../32-libarchive-zip-perl_1.59-1_all.deb ...
Unpacking libarchive-zip-perl (1.59-1) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../33-libfile-stripnondeterminism-perl_0.033-2_all.deb ...
Unpacking libfile-stripnondeterminism-perl (0.033-2) ...
Selecting previously unselected package libtimedate-perl.
Preparing to unpack .../34-libtimedate-perl_2.3000-2_all.deb ...
Unpacking libtimedate-perl (2.3000-2) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../35-dh-strip-nondeterminism_0.033-2_all.deb ...
Unpacking dh-strip-nondeterminism (0.033-2) ...
Selecting previously unselected package libglib2.0-0:i386.
Preparing to unpack .../36-libglib2.0-0_2.50.3-2_i386.deb ...
Unpacking libglib2.0-0:i386 (2.50.3-2) ...
Selecting previously unselected package libcroco3:i386.
Preparing to unpack .../37-libcroco3_0.6.11-3_i386.deb ...
Unpacking libcroco3:i386 (0.6.11-3) ...
Selecting previously unselected package libunistring0:i386.
Preparing to unpack .../38-libunistring0_0.9.6+really0.9.3-0.1_i386.deb ...
Unpacking libunistring0:i386 (0.9.6+really0.9.3-0.1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../39-gettext_0.19.8.1-2_i386.deb ...
Unpacking gettext (0.19.8.1-2) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../40-intltool-debian_0.35.0+20060710.4_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.4) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../41-po-debconf_1.0.20_all.deb ...
Unpacking po-debconf (1.0.20) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../42-debhelper_10.2.5_all.deb ...
Unpacking debhelper (10.2.5) ...
Selecting previously unselected package mysql-common.
Preparing to unpack .../43-mysql-common_5.8+1.0.2_all.deb ...
Unpacking mysql-common (5.8+1.0.2) ...
Selecting previously unselected package libmariadbclient18:i386.
Preparing to unpack .../44-libmariadbclient18_10.1.23-8_i386.deb ...
Unpacking libmariadbclient18:i386 (10.1.23-8) ...
Selecting previously unselected package zlib1g-dev:i386.
Preparing to unpack .../45-zlib1g-dev_1%3a1.2.8.dfsg-5_i386.deb ...
Unpacking zlib1g-dev:i386 (1:1.2.8.dfsg-5) ...
Selecting previously unselected package libmariadbclient-dev.
Preparing to unpack .../46-libmariadbclient-dev_10.1.23-8_i386.deb ...
Unpacking libmariadbclient-dev (10.1.23-8) ...
Selecting previously unselected package libmariadbclient-dev-compat:i386.
Preparing to unpack .../47-libmariadbclient-dev-compat_10.1.23-8_i386.deb ...
Unpacking libmariadbclient-dev-compat:i386 (10.1.23-8) ...
Selecting previously unselected package default-libmysqlclient-dev:i386.
Preparing to unpack .../48-default-libmysqlclient-dev_1.0.2_i386.deb ...
Unpacking default-libmysqlclient-dev:i386 (1.0.2) ...
Selecting previously unselected package xml-core.
Preparing to unpack .../49-xml-core_0.17_all.deb ...
Unpacking xml-core (0.17) ...
Selecting previously unselected package sgml-data.
Preparing to unpack .../50-sgml-data_2.0.10_all.deb ...
Unpacking sgml-data (2.0.10) ...
Selecting previously unselected package docbook-xml.
Preparing to unpack .../51-docbook-xml_4.5-8_all.deb ...
Unpacking docbook-xml (4.5-8) ...
Selecting previously unselected package docbook-xsl.
Preparing to unpack .../52-docbook-xsl_1.79.1+dfsg-2_all.deb ...
Unpacking docbook-xsl (1.79.1+dfsg-2) ...
Selecting previously unselected package libaio1:i386.
Preparing to unpack .../53-libaio1_0.3.110-3_i386.deb ...
Unpacking libaio1:i386 (0.3.110-3) ...
Selecting previously unselected package libaio-dev.
Preparing to unpack .../54-libaio-dev_0.3.110-3_i386.deb ...
Unpacking libaio-dev (0.3.110-3) ...
Selecting previously unselected package libck0.
Preparing to unpack .../55-libck0_0.6.0-1_i386.deb ...
Unpacking libck0 (0.6.0-1) ...
Selecting previously unselected package libck-dev.
Preparing to unpack .../56-libck-dev_0.6.0-1_i386.deb ...
Unpacking libck-dev (0.6.0-1) ...
Selecting previously unselected package libluajit-5.1-common.
Preparing to unpack .../57-libluajit-5.1-common_2.0.4+dfsg-1_all.deb ...
Unpacking libluajit-5.1-common (2.0.4+dfsg-1) ...
Selecting previously unselected package libluajit-5.1-2:i386.
Preparing to unpack .../58-libluajit-5.1-2_2.0.4+dfsg-1+b1_i386.deb ...
Unpacking libluajit-5.1-2:i386 (2.0.4+dfsg-1+b1) ...
Selecting previously unselected package libluajit-5.1-dev:i386.
Preparing to unpack .../59-libluajit-5.1-dev_2.0.4+dfsg-1+b1_i386.deb ...
Unpacking libluajit-5.1-dev:i386 (2.0.4+dfsg-1+b1) ...
Selecting previously unselected package libpq5:i386.
Preparing to unpack .../60-libpq5_9.6.3-1_i386.deb ...
Unpacking libpq5:i386 (9.6.3-1) ...
Selecting previously unselected package libpq-dev.
Preparing to unpack .../61-libpq-dev_9.6.3-1_i386.deb ...
Unpacking libpq-dev (9.6.3-1) ...
Selecting previously unselected package libxslt1.1:i386.
Preparing to unpack .../62-libxslt1.1_1.1.29-2.1_i386.deb ...
Unpacking libxslt1.1:i386 (1.1.29-2.1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../63-pkg-config_0.29-4+b1_i386.deb ...
Unpacking pkg-config (0.29-4+b1) ...
Selecting previously unselected package python-cram.
Preparing to unpack .../64-python-cram_0.7-1_all.deb ...
Unpacking python-cram (0.7-1) ...
Selecting previously unselected package txt2man.
Preparing to unpack .../65-txt2man_1.6.0-1_all.deb ...
Unpacking txt2man (1.6.0-1) ...
Selecting previously unselected package xsltproc.
Preparing to unpack .../66-xsltproc_1.1.29-2.1_i386.deb ...
Unpacking xsltproc (1.1.29-2.1) ...
Selecting previously unselected package sbuild-build-depends-sysbench-dummy.
Preparing to unpack 
.../67-sbuild-build-depends-sysbench-dummy_0.invalid.0_i386.deb ...
Unpacking sbuild-build-depends-sysbench-dummy (0.invalid.0) ...
Setting up libnettle6:i386 (3.3-1+b1) ...
Setting up libexpat1:i386 (2.2.0-2) ...
Setting up libarchive-zip-perl (1.59-1) ...
Setting up libluajit-5.1-common (2.0.4+dfsg-1) ...
Setting up libck0 (0.6.0-1) ...
Setting up mime-support (3.60) ...
Setting up xxd (2:8.0.0197-4) ...
Setting up libtimedate-perl (2.3000-2) ...
Setting up libldap-common (2.4.44+dfsg-4) ...
Setting up groff-base (1.22.3-9) ...
Setting up mysql-common (5.8+1.0.2) ...
update-alternatives: using /etc/mysql/my.cnf.fallback to provide 
/etc/mysql/my.cnf (my.cnf) in auto mode
Setting up libsasl2-modules-db:i386 (2.1.27~101-g0780600+dfsg-3) ...
Setting up libsasl2-2:i386 (2.1.27~101-g0780600+dfsg-3) ...
Setting up gettext-base (0.19.8.1-2) ...
Setting up libpipeline1:i386 (1.4.1-2) ...
Setting up libmariadbclient18:i386 (10.1.23-8) ...
Setting up m4 (1.4.18-1) ...
Setting up sgml-base (1.29) ...
Setting up gawk (1:4.1.4+dfsg-1) ...
Setting up libicu57:i386 (57.1-6) ...
Setting up libbsd0:i386 (0.8.3-1) ...
Setting up libxml2:i386 (2.9.4+dfsg1-2.2) ...
Setting up libtasn1-6:i386 (4.10-1) ...
Setting up libmagic-mgc (1:5.30-1) ...
Setting up libmagic1:i386 (1:5.30-1) ...
Setting up libhogweed4:i386 (3.3-1+b1) ...
Setting up libxslt1.1:i386 (1.1.29-2.1) ...
Processing triggers for libc-bin (2.24-10) ...
Setting up libaio1:i386 (0.3.110-3) ...
Setting up autotools-dev (20161112.1) ...
Setting up libunistring0:i386 (0.9.6+really0.9.3-0.1) ...
Setting up libssl1.1:i386 (1.1.0e-2) ...
Setting up libluajit-5.1-2:i386 (2.0.4+dfsg-1+b1) ...
Setting up vim-common (2:8.0.0197-4) ...
Setting up libsqlite3-0:i386 (3.16.2-3) ...
Setting up libffi6:i386 (3.2.1-6) ...
Setting up xml-core (0.17) ...
Setting up libaio-dev (0.3.110-3) ...
Setting up libkeyutils1:i386 (1.5.9-9) ...
Setting up bsdmainutils (9.0.12+nmu1) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) 
in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in 
auto mode
Setting up libpython2.7-stdlib:i386 (2.7.13-2) ...
Setting up autopoint (0.19.8.1-2) ...
Setting up libidn11:i386 (1.33-1) ...
Setting up libluajit-5.1-dev:i386 (2.0.4+dfsg-1+b1) ...
Setting up zlib1g-dev:i386 (1:1.2.8.dfsg-5) ...
Setting up libfile-stripnondeterminism-perl (0.033-2) ...
Setting up libmariadbclient-dev (10.1.23-8) ...
Setting up libck-dev (0.6.0-1) ...
Setting up txt2man (1.6.0-1) ...
Setting up libmariadbclient-dev-compat:i386 (10.1.23-8) ...
Setting up libglib2.0-0:i386 (2.50.3-2) ...
No schema files found: doing nothing.
Setting up python2.7 (2.7.13-2) ...
Setting up xsltproc (1.1.29-2.1) ...
Setting up autoconf (2.69-10) ...
Setting up file (1:5.30-1) ...
Setting up libkrb5support0:i386 (1.15-1) ...
Setting up libcroco3:i386 (0.6.11-3) ...
Setting up libpython-stdlib:i386 (2.7.13-2) ...
Setting up pkg-config (0.29-4+b1) ...
Setting up libp11-kit0:i386 (0.23.3-5) ...
Setting up automake (1:1.15-6) ...
update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake 
(automake) in auto mode
Setting up man-db (2.7.6.1-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up default-libmysqlclient-dev:i386 (1.0.2) ...
Setting up python (2.7.13-2) ...
Setting up libtool (2.4.6-2) ...
Setting up libk5crypto3:i386 (1.15-1) ...
Setting up python-cram (0.7-1) ...
Setting up gettext (0.19.8.1-2) ...
Setting up libgnutls30:i386 (3.5.8-5) ...
Setting up intltool-debian (0.35.0+20060710.4) ...
Setting up libldap-2.4-2:i386 (2.4.44+dfsg-4+b1) ...
Setting up libkrb5-3:i386 (1.15-1) ...
Setting up po-debconf (1.0.20) ...
Setting up libgssapi-krb5-2:i386 (1.15-1) ...
Setting up libpq5:i386 (9.6.3-1) ...
Setting up libpq-dev (9.6.3-1) ...
Processing triggers for sgml-base (1.29) ...
Setting up docbook-xsl (1.79.1+dfsg-2) ...
Setting up sgml-data (2.0.10) ...
Processing triggers for sgml-base (1.29) ...
Setting up docbook-xml (4.5-8) ...
Processing triggers for sgml-base (1.29) ...
Setting up dh-autoreconf (14) ...
Setting up dh-strip-nondeterminism (0.033-2) ...
Setting up debhelper (10.2.5) ...
Setting up sbuild-build-depends-sysbench-dummy (0.invalid.0) ...
Processing triggers for libc-bin (2.24-10) ...

+------------------------------------------------------------------------------+
| Build environment                                                            |
+------------------------------------------------------------------------------+

Kernel: Linux 4.9.0-3-686-pae i386 (i686)
Toolchain package versions: binutils_2.28-5 dpkg-dev_1.18.24 g++-6_6.3.0-18 
gcc-6_6.3.0-18 libc6-dev_2.24-10 libstdc++-6-dev_6.3.0-18 libstdc++6_6.3.0-18 
linux-libc-dev_4.9.25-1
Package versions: adduser_3.115 apt_1.4.4 autoconf_2.69-10 automake_1:1.15-6 
autopoint_0.19.8.1-2 autotools-dev_20161112.1 base-files_9.9 base-passwd_3.5.43 
bash_4.4-5 binutils_2.28-5 bsdmainutils_9.0.12+nmu1 bsdutils_1:2.29.2-1 
build-essential_12.3 bzip2_1.0.6-8.1 ccache_3.3.4-1 coreutils_8.26-3 
cpp_4:6.3.0-4 cpp-6_6.3.0-18 dash_0.5.8-2.4 debconf_1.5.60 debhelper_10.2.5 
debian-archive-keyring_2014.3 debianutils_4.8.1.1 
default-libmysqlclient-dev_1.0.2 dh-autoreconf_14 
dh-strip-nondeterminism_0.033-2 diffutils_1:3.5-3 docbook-xml_4.5-8 
docbook-xsl_1.79.1+dfsg-2 dpkg_1.18.24 dpkg-dev_1.18.24 e2fslibs_1.43.4-2 
e2fsprogs_1.43.4-2 eatmydata_105-5 fakeroot_1.21-3.1 file_1:5.30-1 
findutils_4.6.0+git+20161106-2 g++_4:6.3.0-4 g++-6_6.3.0-18 gawk_1:4.1.4+dfsg-1 
gcc_4:6.3.0-4 gcc-5-base_5.4.1-10 gcc-6_6.3.0-18 gcc-6-base_6.3.0-18 
gettext_0.19.8.1-2 gettext-base_0.19.8.1-2 gpgv_2.1.18-8 grep_2.27-2 
groff-base_1.22.3-9 gzip_1.6-5+b1 hostname_3.18+b1 init-system-helpers_1.48 
intltool-debian_0.35.0+20060710.4 libacl1_2.2.52-3+b1 libaio-dev_0.3.110-3 
libaio1_0.3.110-3 libapt-pkg5.0_1.4.4 libarchive-zip-perl_1.59-1 
libasan3_6.3.0-18 libatomic1_6.3.0-18 libattr1_1:2.4.47-2+b2 
libaudit-common_1:2.6.7-2 libaudit1_1:2.6.7-2 libblkid1_2.29.2-1 
libbsd0_0.8.3-1 libbz2-1.0_1.0.6-8.1 libc-bin_2.24-10 libc-dev-bin_2.24-10 
libc6_2.24-10 libc6-dev_2.24-10 libcap-ng0_0.7.7-3+b1 libcc1-0_6.3.0-18 
libcilkrts5_6.3.0-18 libck-dev_0.6.0-1 libck0_0.6.0-1 libcomerr2_1.43.4-2 
libcroco3_0.6.11-3 libdb5.3_5.3.28-12+b1 libdebconfclient0_0.227 
libdpkg-perl_1.18.24 libeatmydata1_105-5 libexpat1_2.2.0-2 libfakeroot_1.21-3.1 
libfdisk1_2.29.2-1 libffi6_3.2.1-6 libfile-stripnondeterminism-perl_0.033-2 
libgcc-6-dev_6.3.0-18 libgcc1_1:6.3.0-18 libgcrypt20_1.7.6-1 libgdbm3_1.8.3-14 
libglib2.0-0_2.50.3-2 libgmp10_2:6.1.2+dfsg-1 libgnutls30_3.5.8-5 
libgomp1_6.3.0-18 libgpg-error0_1.26-2 libgssapi-krb5-2_1.15-1 
libhogweed4_3.3-1+b1 libicu57_57.1-6 libidn11_1.33-1 libisl15_0.18-1 
libitm1_6.3.0-18 libk5crypto3_1.15-1 libkeyutils1_1.5.9-9 libkrb5-3_1.15-1 
libkrb5support0_1.15-1 libldap-2.4-2_2.4.44+dfsg-4+b1 
libldap-common_2.4.44+dfsg-4 libluajit-5.1-2_2.0.4+dfsg-1+b1 
libluajit-5.1-common_2.0.4+dfsg-1 libluajit-5.1-dev_2.0.4+dfsg-1+b1 
liblz4-1_0.0~r131-2+b1 liblzma5_5.2.2-1.2+b1 libmagic-mgc_1:5.30-1 
libmagic1_1:5.30-1 libmariadbclient-dev_10.1.23-8 
libmariadbclient-dev-compat_10.1.23-8 libmariadbclient18_10.1.23-8 
libmount1_2.29.2-1 libmpc3_1.0.3-1+b2 libmpfr4_3.1.5-1 libmpx2_6.3.0-18 
libncurses5_6.0+20161126-1 libncursesw5_6.0+20161126-1 libnettle6_3.3-1+b1 
libp11-kit0_0.23.3-5 libpam-modules_1.1.8-3.5 libpam-modules-bin_1.1.8-3.5 
libpam-runtime_1.1.8-3.5 libpam0g_1.1.8-3.5 libpcre3_2:8.39-3 
libperl5.24_5.24.1-2 libpipeline1_1.4.1-2 libpq-dev_9.6.3-1 libpq5_9.6.3-1 
libpython-stdlib_2.7.13-2 libpython2.7-minimal_2.7.13-2 
libpython2.7-stdlib_2.7.13-2 libquadmath0_6.3.0-18 libreadline7_7.0-3 
libsasl2-2_2.1.27~101-g0780600+dfsg-3 
libsasl2-modules-db_2.1.27~101-g0780600+dfsg-3 libselinux1_2.6-3+b1 
libsemanage-common_2.6-2 libsemanage1_2.6-2 libsepol1_2.6-2 libsigsegv2_2.10-5 
libsmartcols1_2.29.2-1 libsqlite3-0_3.16.2-3 libss2_1.43.4-2 libssl1.1_1.1.0e-2 
libstdc++-6-dev_6.3.0-18 libstdc++6_6.3.0-18 libsystemd0_232-23 
libtasn1-6_4.10-1 libtimedate-perl_2.3000-2 libtinfo5_6.0+20161126-1 
libtool_2.4.6-2 libubsan0_6.3.0-18 libudev1_232-23 
libunistring0_0.9.6+really0.9.3-0.1 libustr-1.0-1_1.0.4-6 libuuid1_2.29.2-1 
libxml2_2.9.4+dfsg1-2.2 libxslt1.1_1.1.29-2.1 linux-libc-dev_4.9.25-1 
login_1:4.4-4 lsb-base_9.20161125 m4_1.4.18-1 make_4.1-9.1 man-db_2.7.6.1-2 
mawk_1.3.3-17+b3 mime-support_3.60 mount_2.29.2-1 multiarch-support_2.24-10 
mysql-common_5.8+1.0.2 ncurses-base_6.0+20161126-1 ncurses-bin_6.0+20161126-1 
passwd_1:4.4-4 patch_2.7.5-1+b2 perl_5.24.1-2 perl-base_5.24.1-2 
perl-modules-5.24_5.24.1-2 pkg-config_0.29-4+b1 po-debconf_1.0.20 
python_2.7.13-2 python-cram_0.7-1 python-minimal_2.7.13-2 python2.7_2.7.13-2 
python2.7-minimal_2.7.13-2 readline-common_7.0-3 
sbuild-build-depends-core-dummy_0.invalid.0 
sbuild-build-depends-sysbench-dummy_0.invalid.0 sed_4.4-1 sensible-utils_0.0.9 
sgml-base_1.29 sgml-data_2.0.10 sysvinit-utils_2.88dsf-59.9 tar_1.29b-1.1 
txt2man_1.6.0-1 tzdata_2017b-1 util-linux_2.29.2-1 vim-common_2:8.0.0197-4 
xml-core_0.17 xsltproc_1.1.29-2.1 xxd_2:8.0.0197-4 xz-utils_5.2.2-1.2+b1 
zlib1g_1:1.2.8.dfsg-5 zlib1g-dev_1:1.2.8.dfsg-5

+------------------------------------------------------------------------------+
| Build                                                                        |
+------------------------------------------------------------------------------+


Unpack source
-------------

dpkg-source: warning: extracting unsigned source package 
(sysbench_1.0.6+ds-1.dsc)
dpkg-source: info: extracting sysbench in /<<BUILDDIR>>/sysbench-1.0.6+ds
dpkg-source: info: unpacking sysbench_1.0.6+ds.orig.tar.gz
dpkg-source: info: unpacking sysbench_1.0.6+ds-1.debian.tar.xz
dpkg-source: info: applying 01_dont_require_third_party.diff
dpkg-source: info: applying 02_fix_typo.diff
dpkg-source: info: applying 03_dont_install_tests_in_binary_pkg.diff
dpkg-source: info: applying 04_strip_env_from_shebang.diff

Check disk space
----------------

Sufficient free space for build

User Environment
----------------

APT_CONFIG=/var/lib/sbuild/apt.conf
CCACHE_COMPRESS=1
CCACHE_DIR=/var/cache/ccache-sbuild
CCACHE_UMASK=002
HOME=/sbuild-nonexistent
LANG=en_GB.UTF-8
LC_ALL=POSIX
LD_LIBRARY_PATH=/usr/lib/libeatmydata
LD_PRELOAD=libeatmydata.so
LOGNAME=swhitton
PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/<<BUILDDIR>>/sysbench-1.0.6+ds
SCHROOT_ALIAS_NAME=experimental
SCHROOT_CHROOT_NAME=unstable-i386-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=1000
SCHROOT_GROUP=swhitton
SCHROOT_SESSION_ID=unstable-i386-sbuild-afa975e8-4d29-4456-8230-88a7e11336b9
SCHROOT_UID=1000
SCHROOT_USER=swhitton
SHELL=/bin/sh
USER=swhitton

dpkg-buildpackage
-----------------

dpkg-buildpackage: info: source package sysbench
dpkg-buildpackage: info: source version 1.0.6+ds-1
dpkg-buildpackage: info: source distribution experimental
dpkg-buildpackage: info: source changed by JCF Ploemen (jcfp) <li...@jcf.pm>
 dpkg-source --before-build sysbench-1.0.6+ds
dpkg-buildpackage: info: host architecture i386
 fakeroot debian/rules clean
# autoreconf is implied by dh compat 10
dh clean
   dh_testdir
   dh_auto_clean
   dh_autoreconf_clean
   dh_clean
 debian/rules build
# autoreconf is implied by dh compat 10
dh build
   dh_testdir
   dh_update_autotools_config
   dh_autoreconf
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'config'.
libtoolize: copying file 'config/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:44: installing 'config/ar-lib'
configure.ac:25: installing 'config/compile'
configure.ac:12: installing 'config/config.guess'
configure.ac:12: installing 'config/config.sub'
configure.ac:17: installing 'config/install-sh'
configure.ac:17: installing 'config/missing'
src/Makefile.am: installing 'config/depcomp'
parallel-tests: installing 'config/test-driver'
   debian/rules override_dh_auto_configure
make[1]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds'
dh_auto_configure -- --with-mysql --with-pgsql --with-system-luajit 
--with-system-ck
        ./configure --build=i686-linux-gnu --prefix=/usr 
--includedir=\${prefix}/include --mandir=\${prefix}/share/man 
--infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var 
--disable-silent-rules --libdir=\${prefix}/lib/i386-linux-gnu 
--libexecdir=\${prefix}/lib/i386-linux-gnu --disable-maintainer-mode 
--disable-dependency-tracking --with-mysql --with-pgsql --with-system-luajit 
--with-system-ck
configure: WARNING: unrecognized options: --disable-maintainer-mode
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... none
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) none
checking for gcc option to accept ISO C99... none needed
checking how to run the C preprocessor... gcc -E
checking for a sed that does not truncate output... /bin/sed
checking for C compiler vendor... gnu
checking for gcc architecture flag... 
checking for x86 cpuid 0 output... a:756e6547:6c65746e:49656e69
checking for x86 cpuid 1 output... 6fb:1020800:e3fd:bfebfbff
checking whether C compiler accepts -march=core2... yes
checking for gcc architecture flag... -march=core2
checking for ar... ar
checking the archiver (ar) interface... ar
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) /bin/sed
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu 
format... func_convert_file_noop
checking how to convert i686-pc-linux-gnu file names to toolchain format... 
func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... yes
checking for xxd... yes
checking for C compiler vendor... (cached) gnu
checking whether to compile with MySQL support... yes
checking whether to compile with Drizzle support... no
checking whether to compile with libattachsql support... no
checking whether to compile with Oracle support... no
checking whether to compile with PostgreSQL support... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether to build with system or bundled LuaJIT... system
checking for LUAJIT... yes
checking whether to build with system or bundled Concurrency Kit... system
checking for CK... yes
checking whether SHM_HUGETLB is declared... yes
checking whether O_SYNC is declared... yes
checking for xsltproc... xsltproc
checking whether xsltproc works... yes
checking for the pthreads library -lpthreads... no
checking whether pthreads work without any flags... no
checking whether pthreads work with -Kthread... no
checking whether pthreads work with -kthread... no
checking for the pthreads library -llthread... no
checking whether pthreads work with -pthread... yes
checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
checking if more special flags are required for pthreads... no
checking for sqrt in -lm... yes
checking for mysql_config... /usr/bin/mysql_config
checking MySQL C flags... -I/usr/include/mysql 
checking MySQL linker flags... -L/usr/lib/i386-linux-gnu  -lmariadbclient 
-lpthread -lz -lm -ldl
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for pg_config... /usr/bin/pg_config
checking PostgreSQL C flags... -I/usr/include/postgresql
checking PostgreSQL linker flags... -L/usr/lib/i386-linux-gnu -lpq
checking libaio.h usability... yes
checking libaio.h presence... yes
checking for libaio.h... yes
checking for io_queue_init in -laio... yes
checking if io_getevents() has an old interface... no
checking for malloc in -lumem... no
checking for malloc in -lmtmalloc... no
checking for ANSI C header files... (cached) yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking math.h usability... yes
checking math.h presence... yes
checking for math.h... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking sched.h usability... yes
checking sched.h presence... yes
checking for sched.h... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/aio.h usability... no
checking sys/aio.h presence... no
checking for sys/aio.h... no
checking sys/ipc.h usability... yes
checking sys/ipc.h presence... yes
checking for sys/ipc.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/mman.h usability... yes
checking sys/mman.h presence... yes
checking for sys/mman.h... yes
checking sys/shm.h usability... yes
checking sys/shm.h presence... yes
checking for sys/shm.h... yes
checking thread.h usability... no
checking thread.h presence... no
checking for thread.h... no
checking for unistd.h... (cached) yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking libgen.h usability... yes
checking libgen.h presence... yes
checking for libgen.h... yes
checking for off_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking for thread local storage (TLS) class... __thread
checking for __attribute__((format))... yes
checking for __attribute__((unused))... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking size of size_t... 4
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... yes
checking for getpagesize... yes
checking for working mmap... yes
checking whether strerror_r is declared... yes
checking for strerror_r... yes
checking whether strerror_r returns char *... yes
checking for library containing clock_gettime... none required
checking for alarm... yes
checking for clock_gettime... yes
checking for directio... no
checking for fdatasync... yes
checking for gettimeofday... yes
checking for isatty... yes
checking for memalign... yes
checking for memset... yes
checking for posix_memalign... yes
checking for pthread_yield... yes
checking for setvbuf... yes
checking for sqrt... yes
checking for strdup... yes
checking for thr_setconcurrency... no
checking for valloc... yes
checking for pthread_once... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/xsl/Makefile
config.status: creating doc/xsl/catalog.xml
config.status: creating doc/Makefile
config.status: creating src/Makefile
config.status: creating src/drivers/Makefile
config.status: creating src/drivers/mysql/Makefile
config.status: creating src/drivers/drizzle/Makefile
config.status: creating src/drivers/oracle/Makefile
config.status: creating src/drivers/pgsql/Makefile
config.status: creating src/drivers/attachsql/Makefile
config.status: creating src/tests/Makefile
config.status: creating src/tests/cpu/Makefile
config.status: creating src/tests/fileio/Makefile
config.status: creating src/tests/memory/Makefile
config.status: creating src/tests/threads/Makefile
config.status: creating src/tests/mutex/Makefile
config.status: creating src/lua/Makefile
config.status: creating src/lua/internal/Makefile
config.status: creating tests/Makefile
config.status: creating tests/include/config.sh
config.status: creating snap/snapcraft.yaml
config.status: creating config/config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --disable-maintainer-mode
===============================================================================
sysbench version   : 1.0.6
CC                 : gcc
CFLAGS             : -O2 -ggdb3 -g -O2 
-fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. -fstack-protector-strong 
-Wformat -Werror=format-security -march=core2 -W -Wall -Wextra -Wpointer-arith 
-Wbad-function-cast   -Wstrict-prototypes -Wnested-externs -Wno-inline 
-Wno-format-zero-length   -funroll-loops  -Wundef -Wstrict-prototypes 
-Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wcast-align      
  -pthread
CPPFLAGS           : -D_GNU_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2  
-I$(top_srcdir)/src -I/usr/include/luajit-2.0 -D__x86__
LDFLAGS            : -Wl,-z,relro -Wl,-z,now -L/usr/lib/i386-linux-gnu 
LIBS               : -laio -lm 
EXTRA_LDFLAGS      : 

prefix             : /usr
bindir             : ${prefix}/bin
libexecdir         : /usr/lib/i386-linux-gnu
mandir             : /usr/share/man
datadir            : ${prefix}/share

MySQL support      : yes
Drizzle support    : no
AttachSQL support  : no
Oracle support     : no
PostgreSQL support : yes

LuaJIT             : system
LUAJIT_CFLAGS      : -I/usr/include/luajit-2.0
LUAJIT_LIBS        : -lluajit-5.1 -ldl
LUAJIT_LDFLAGS     : -rdynamic

Concurrency Kit    : system
===============================================================================
make[1]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds'
   debian/rules override_dh_auto_build
make[1]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds'
# date comes from d/changelog entry
txt2man \
        -v "Benchmark tool for database systems" \
        -t SYSBENCH \
        -s 1 \
        "debian/manpage.txt" > sysbench.1
dh_auto_build
        make -j2
make[2]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds'
Making all in doc
make[3]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/doc'
Making all in xsl
make[4]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/doc/xsl'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/doc/xsl'
make[4]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/doc'
XML_CATALOG_FILES=./xsl/catalog.xml xsltproc --nonet -o manual.html 
./xsl/xhtml.xsl ../doc/manual.xml
make[4]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/doc'
make[3]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/doc'
Making all in src
make[3]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src'
Making all in drivers
make[4]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/drivers'
Making all in mysql
make[5]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/drivers/mysql'
gcc -DHAVE_CONFIG_H -I. -I../../../config  -I/usr/include/mysql  -I../../../src 
-I/usr/include/luajit-2.0 -D__x86__ -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
libsbmysql_a-drv_mysql.o `test -f 'drv_mysql.c' || echo './'`drv_mysql.c
rm -f libsbmysql.a
ar cru libsbmysql.a libsbmysql_a-drv_mysql.o 
ar: `u' modifier ignored since `D' is the default (see `U')
ranlib libsbmysql.a
make[5]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/drivers/mysql'
Making all in pgsql
make[5]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/drivers/pgsql'
gcc -DHAVE_CONFIG_H -I. -I../../../config  -g -I/usr/include/postgresql 
-I../../../src -I/usr/include/luajit-2.0 -D__x86__ -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
libsbpgsql_a-drv_pgsql.o `test -f 'drv_pgsql.c' || echo './'`drv_pgsql.c
rm -f libsbpgsql.a
ar cru libsbpgsql.a libsbpgsql_a-drv_pgsql.o 
ar: `u' modifier ignored since `D' is the default (see `U')
ranlib libsbpgsql.a
make[5]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/drivers/pgsql'
make[5]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/drivers'
make[5]: Nothing to be done for 'all-am'.
make[5]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/drivers'
make[4]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/drivers'
Making all in tests
make[4]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests'
Making all in cpu
make[5]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests/cpu'
gcc -DHAVE_CONFIG_H -I. -I../../../config  -I../../../src 
-I/usr/include/luajit-2.0 -D__x86__ -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
libsbcpu_a-sb_cpu.o `test -f 'sb_cpu.c' || echo './'`sb_cpu.c
rm -f libsbcpu.a
ar cru libsbcpu.a libsbcpu_a-sb_cpu.o 
ar: `u' modifier ignored since `D' is the default (see `U')
ranlib libsbcpu.a
make[5]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests/cpu'
Making all in fileio
make[5]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests/fileio'
gcc -DHAVE_CONFIG_H -I. -I../../../config  -I../../../src 
-I/usr/include/luajit-2.0 -D__x86__ -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
libsbfileio_a-sb_fileio.o `test -f 'sb_fileio.c' || echo './'`sb_fileio.c
gcc -DHAVE_CONFIG_H -I. -I../../../config  -I../../../src 
-I/usr/include/luajit-2.0 -D__x86__ -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
libsbfileio_a-crc32.o `test -f 'crc32.c' || echo './'`crc32.c
rm -f libsbfileio.a
ar cru libsbfileio.a libsbfileio_a-sb_fileio.o libsbfileio_a-crc32.o 
ar: `u' modifier ignored since `D' is the default (see `U')
ranlib libsbfileio.a
make[5]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests/fileio'
Making all in memory
make[5]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests/memory'
gcc -DHAVE_CONFIG_H -I. -I../../../config  -I../../../src 
-I/usr/include/luajit-2.0 -D__x86__ -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
libsbmemory_a-sb_memory.o `test -f 'sb_memory.c' || echo './'`sb_memory.c
rm -f libsbmemory.a
ar cru libsbmemory.a libsbmemory_a-sb_memory.o 
ar: `u' modifier ignored since `D' is the default (see `U')
ranlib libsbmemory.a
make[5]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests/memory'
Making all in threads
make[5]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests/threads'
gcc -DHAVE_CONFIG_H -I. -I../../../config  -I../../../src 
-I/usr/include/luajit-2.0 -D__x86__ -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
libsbthreads_a-sb_threads.o `test -f 'sb_threads.c' || echo './'`sb_threads.c
rm -f libsbthreads.a
ar cru libsbthreads.a libsbthreads_a-sb_threads.o 
ar: `u' modifier ignored since `D' is the default (see `U')
ranlib libsbthreads.a
make[5]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests/threads'
Making all in mutex
make[5]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests/mutex'
gcc -DHAVE_CONFIG_H -I. -I../../../config  -I../../../src 
-I/usr/include/luajit-2.0 -D__x86__ -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
libsbmutex_a-sb_mutex.o `test -f 'sb_mutex.c' || echo './'`sb_mutex.c
rm -f libsbmutex.a
ar cru libsbmutex.a libsbmutex_a-sb_mutex.o 
ar: `u' modifier ignored since `D' is the default (see `U')
ranlib libsbmutex.a
make[5]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests/mutex'
make[5]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests'
make[5]: Nothing to be done for 'all-am'.
make[5]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests'
make[4]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/tests'
Making all in lua
make[4]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/lua'
Making all in internal
make[5]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/lua/internal'
xxd -i sysbench.lua sysbench.lua.h
xxd -i sysbench.rand.lua sysbench.rand.lua.h
xxd -i sysbench.sql.lua sysbench.sql.lua.h
xxd -i sysbench.compat.lua sysbench.compat.lua.h
xxd -i sysbench.cmdline.lua sysbench.cmdline.lua.h
xxd -i sysbench.histogram.lua sysbench.histogram.lua.h
make  all-am
make[6]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/lua/internal'
make[6]: Nothing to be done for 'all-am'.
make[6]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/lua/internal'
make[5]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/lua/internal'
make[5]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/lua'
make[5]: Nothing to be done for 'all-am'.
make[5]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/lua'
make[4]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src/lua'
Making all in .
make[4]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src'
gcc -DHAVE_CONFIG_H -I. -I../config  -I../src -I/usr/include/luajit-2.0 
-D__x86__ -DDATADIR=\"/usr/share/sysbench\" 
-DLIBDIR=\"/usr/lib/i386-linux-gnu/sysbench\" -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
sysbench.o sysbench.c
gcc -DHAVE_CONFIG_H -I. -I../config  -I../src -I/usr/include/luajit-2.0 
-D__x86__ -DDATADIR=\"/usr/share/sysbench\" 
-DLIBDIR=\"/usr/lib/i386-linux-gnu/sysbench\" -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
sb_timer.o sb_timer.c
gcc -DHAVE_CONFIG_H -I. -I../config  -I../src -I/usr/include/luajit-2.0 
-D__x86__ -DDATADIR=\"/usr/share/sysbench\" 
-DLIBDIR=\"/usr/lib/i386-linux-gnu/sysbench\" -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
sb_options.o sb_options.c
gcc -DHAVE_CONFIG_H -I. -I../config  -I../src -I/usr/include/luajit-2.0 
-D__x86__ -DDATADIR=\"/usr/share/sysbench\" 
-DLIBDIR=\"/usr/lib/i386-linux-gnu/sysbench\" -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
sb_logger.o sb_logger.c
gcc -DHAVE_CONFIG_H -I. -I../config  -I../src -I/usr/include/luajit-2.0 
-D__x86__ -DDATADIR=\"/usr/share/sysbench\" 
-DLIBDIR=\"/usr/lib/i386-linux-gnu/sysbench\" -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
db_driver.o db_driver.c
gcc -DHAVE_CONFIG_H -I. -I../config  -I../src -I/usr/include/luajit-2.0 
-D__x86__ -DDATADIR=\"/usr/share/sysbench\" 
-DLIBDIR=\"/usr/lib/i386-linux-gnu/sysbench\" -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
sb_histogram.o sb_histogram.c
gcc -DHAVE_CONFIG_H -I. -I../config  -I../src -I/usr/include/luajit-2.0 
-D__x86__ -DDATADIR=\"/usr/share/sysbench\" 
-DLIBDIR=\"/usr/lib/i386-linux-gnu/sysbench\" -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
sb_rand.o sb_rand.c
gcc -DHAVE_CONFIG_H -I. -I../config  -I../src -I/usr/include/luajit-2.0 
-D__x86__ -DDATADIR=\"/usr/share/sysbench\" 
-DLIBDIR=\"/usr/lib/i386-linux-gnu/sysbench\" -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
sb_thread.o sb_thread.c
gcc -DHAVE_CONFIG_H -I. -I../config  -I../src -I/usr/include/luajit-2.0 
-D__x86__ -DDATADIR=\"/usr/share/sysbench\" 
-DLIBDIR=\"/usr/lib/i386-linux-gnu/sysbench\" -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
sb_barrier.o sb_barrier.c
gcc -DHAVE_CONFIG_H -I. -I../config  -I../src -I/usr/include/luajit-2.0 
-D__x86__ -DDATADIR=\"/usr/share/sysbench\" 
-DLIBDIR=\"/usr/lib/i386-linux-gnu/sysbench\" -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
sb_lua.o sb_lua.c
gcc -DHAVE_CONFIG_H -I. -I../config  -I../src -I/usr/include/luajit-2.0 
-D__x86__ -DDATADIR=\"/usr/share/sysbench\" 
-DLIBDIR=\"/usr/lib/i386-linux-gnu/sysbench\" -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
sb_util.o sb_util.c
gcc -DHAVE_CONFIG_H -I. -I../config  -I../src -I/usr/include/luajit-2.0 
-D__x86__ -DDATADIR=\"/usr/share/sysbench\" 
-DLIBDIR=\"/usr/lib/i386-linux-gnu/sysbench\" -D_GNU_SOURCE -Wdate-time 
-D_FORTIFY_SOURCE=2 -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast   
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length   
-funroll-loops  -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align        -pthread -O2 
-ggdb3 -g -O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 -c -o 
sb_counter.o sb_counter.c
/bin/bash ../libtool  --tag=CC   --mode=link gcc -W -Wall -Wextra 
-Wpointer-arith -Wbad-function-cast   -Wstrict-prototypes -Wnested-externs 
-Wno-inline -Wno-format-zero-length   -funroll-loops  -Wundef 
-Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations 
-Wredundant-decls -Wcast-align        -pthread -O2 -ggdb3 -g -O2 
-fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. -fstack-protector-strong 
-Wformat -Werror=format-security -march=core2      -rdynamic -Wl,-z,relro 
-Wl,-z,now -L/usr/lib/i386-linux-gnu -o sysbench sysbench.o sb_timer.o 
sb_options.o sb_logger.o db_driver.o sb_histogram.o sb_rand.o sb_thread.o 
sb_barrier.o sb_lua.o sb_util.o sb_counter.o tests/fileio/libsbfileio.a 
tests/threads/libsbthreads.a tests/memory/libsbmemory.a tests/cpu/libsbcpu.a 
tests/mutex/libsbmutex.a drivers/mysql/libsbmysql.a -L/usr/lib/i386-linux-gnu  
-lmariadbclient -lpthread -lz -lm -ldl   drivers/pgsql/libsbpgsql.a 
-L/usr/lib/i386-linux-gnu -lpq  -lluajit-5.1 -ldl -lck -laio -lm 
libtool: link: gcc -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast 
-Wstrict-prototypes -Wnested-externs -Wno-inline -Wno-format-zero-length 
-funroll-loops -Wundef -Wstrict-prototypes -Wmissing-prototypes 
-Wmissing-declarations -Wredundant-decls -Wcast-align -pthread -O2 -ggdb3 -g 
-O2 -fdebug-prefix-map=/<<BUILDDIR>>/sysbench-1.0.6+ds=. 
-fstack-protector-strong -Wformat -Werror=format-security -march=core2 
-rdynamic -Wl,-z -Wl,relro -Wl,-z -Wl,now -o sysbench sysbench.o sb_timer.o 
sb_options.o sb_logger.o db_driver.o sb_histogram.o sb_rand.o sb_thread.o 
sb_barrier.o sb_lua.o sb_util.o sb_counter.o  -L/usr/lib/i386-linux-gnu 
tests/fileio/libsbfileio.a tests/threads/libsbthreads.a 
tests/memory/libsbmemory.a tests/cpu/libsbcpu.a tests/mutex/libsbmutex.a 
drivers/mysql/libsbmysql.a -lmariadbclient -lpthread -lz 
drivers/pgsql/libsbpgsql.a -lpq -lluajit-5.1 -ldl -lck -laio -lm -pthread
make[4]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src'
make[3]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/src'
make[3]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds'
make[2]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds'
make[1]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds'
   dh_auto_test
        make -j2 test VERBOSE=1
make[1]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds'
cd tests && make test
make[2]: Entering directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/tests'
./test_run.sh
t/1st.t: passed
t/api_basic.t: passed
t/api_histogram.t: passed
t/api_legacy_basic.t: skipped
t/api_legacy_rand.t: passed
t/api_legacy_sql.t: skipped
t/api_rand.t: passed
t/api_reports.t: failed
--- t/api_reports.t
+++ t/api_reports.t.err
@@ -21,8 +21,8 @@
   > EOF
 
   $ sysbench $SB_ARGS run
-  [ 2s ] thds: 1 tps: *.* qps: 0.00 (r/w/o: 0.00/0.00/0.00) lat (ms,95%): 1.* 
err/s 0.00 reconn/s: 0.00 (glob)
-  [ 3s ] thds: 0 tps: *.* qps: 0.00 (r/w/o: 0.00/0.00/0.00) lat (ms,95%): 1.* 
err/s 0.00 reconn/s: 0.00 (glob)
+  [ 2s ] thds: 1 tps: 849.82 qps: 0.00 (r/w/o: 0.00/0.00/0.00) lat (ms,95%): 
2.18 err/s 0.00 reconn/s: 0.00
+  [ 3s ] thds: 0 tps: 846.51 qps: 0.00 (r/w/o: 0.00/0.00/0.00) lat (ms,95%): 
2.18 err/s 0.00 reconn/s: 0.00
 
 ########################################################################
 # CSV format via a custom hook
@@ -40,8 +40,8 @@
   > EOF
 
   $ sysbench $SB_ARGS run
-  2,1,*.*,0.00,0.00,0.00,0.00,1.*,0.00,0.00 (glob)
-  3,0,*.*,0.00,0.00,0.00,0.00,1.*,0.00,0.00 (glob)
+  2,1,818.21,0.00,0.00,0.00,0.00,2.18,0.00,0.00
+  3,0,811.44,0.00,0.00,0.00,0.00,2.18,0.00,0.00
 
 ########################################################################
 # JSON format via a custom hook
@@ -69,7 +69,7 @@
       "writes": 0.00,
       "other": 0.00,
     },
-    "latency": 1.*, (glob)
+    "latency": 2.11,
     "errors": 0.00,
     "reconnects": 0.00
   },
@@ -83,7 +83,7 @@
       "writes": 0.00,
       "other": 0.00,
     },
-    "latency": 1.*, (glob)
+    "latency": 2.07,
     "errors": 0.00,
     "reconnects": 0.00
   },
t/api_sql_mysql.t: skipped
t/api_sql_pgsql.t: skipped
t/cmd_cleanup.t: passed
t/cmd_help.t: passed
t/cmd_prepare.t: passed
t/cmd_run.t: passed
t/cmdline.t: passed
t/commands.t: passed
t/drivers.t: passed
t/drv_mysql.t: skipped
t/drv_pgsql.t: skipped
t/help_drv_mysql.t: passed
t/help_drv_pgsql.t: passed
t/opt_help.t: passed
t/opt_histogram.t: passed
t/opt_report_checkpoints.t: passed
t/opt_report_interval.t: passed
t/opt_version.t: passed
t/script_bulk_insert_mysql.t: skipped
t/script_bulk_insert_pgsql.t: skipped
t/script_oltp_help.t: passed
t/script_oltp_insert_mysql.t: skipped
t/script_oltp_insert_pgsql.t: skipped
t/script_oltp_point_select_mysql.t: skipped
t/script_oltp_point_select_pgsql.t: skipped
t/script_oltp_read_write_mysql.t: skipped
t/script_oltp_read_write_pgsql.t: skipped
t/script_select_random_mysql.t: skipped
t/script_select_random_pgsql.t: skipped
t/test_cpu.t: passed
t/test_fileio.t: passed
t/test_memory.t: passed
t/test_mutex.t: passed
t/test_threads.t: passed
t/tests.t: passed
# Ran 43 tests, 16 skipped, 1 failed.
Makefile:970: recipe for target 'test' failed
make[2]: *** [test] Error 1
make[2]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds/tests'
Makefile:917: recipe for target 'test' failed
make[1]: *** [test] Error 2
make[1]: Leaving directory '/<<BUILDDIR>>/sysbench-1.0.6+ds'
dh_auto_test: make -j2 test VERBOSE=1 returned exit code 2
debian/rules:9: recipe for target 'build' failed
make: *** [build] Error 2
dpkg-buildpackage: error: debian/rules build gave error exit status 2
--------------------------------------------------------------------------------
Build finished at 2017-05-19T07:01:31Z

Finished
--------


+------------------------------------------------------------------------------+
| Cleanup                                                                      |
+------------------------------------------------------------------------------+

Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
E: Build failure (dpkg-buildpackage died)

+------------------------------------------------------------------------------+
| Summary                                                                      |
+------------------------------------------------------------------------------+

Build Architecture: i386
Build Type: binary
Build-Space: 9132
Build-Time: 67
Distribution: experimental
Fail-Stage: build
Host Architecture: i386
Install-Time: 50
Job: /home/swhitton/rfs/sysbench_1.0.6+ds-1.dsc
Machine Architecture: i386
Package: sysbench
Package-Time: 167
Source-Version: 1.0.6+ds-1
Space: 9132
Status: attempted
Version: 1.0.6+ds-1
--------------------------------------------------------------------------------
Finished at 2017-05-19T07:01:31Z
Build needed 00:02:47, 9132k disk space

Attachment: signature.asc
Description: PGP signature

Reply via email to