HI,
we have a problem using ftpsync, on log :
Sep 07 08:25:20 kartolo ftpsync[19182]: Mirrorsync done
Unknown command: -s
Cannot parse address `[ftpsync@kartolo] (19182) rsync ERROR on
2017.09.07-08:25:20' (while expanding `[ftpsync@kartolo] (19182) rsync ERROR on
2017.09.07-08:25:20'): Format of RFC822 object is bad
any advice ? let me know if any mistake on ftpsync.conf ( i attach ftpsync.txt )
nurdiansyah
----- Original Message -----
From: "Peter Palfrader" <[email protected]>
To: [email protected]
Sent: Wednesday, September 6, 2017 6:07:28 PM
Subject: Bug#874459: Debian mirror kartolo.sby.datautama.net.id:
tracefile-name, sync-script
Package: mirrors
User: [email protected]
Usertags: mirror-problem may-auto-close
Hi,
I was checking some things in the Debian mirror universe and noticed
a problem with your mirror:
o Status:
https://mirror-master.debian.org/status/mirror-info/kartolo.sby.datautama.net.id.html
o There is a mismatch between your tracefile name in
http://kartolo.sby.datautama.net.id/debian/project/trace/ and your
site-name. Can you please have the tracefile name be the same as the
site name? I think you can accomplish this by setting MIRRORNAME= in
ftpsync.conf (see next item).
o The trace file at
http://kartolo.sby.datautama.net.id/debian/project/trace/uweb.datautama.net.id
does not contain much information.
Please use our ftpsync script to mirror Debian.
It should produce better trace files, and do the mirroring in a way that
ensures the mirror is in a consistent state even during updates.
http://ftp.debian.org/debian/project/ftpsync/ftpsync-current.tar.gz
Cheers,
--
| .''`. ** Debian **
Peter Palfrader | : :' : The universal
https://www.palfrader.org/ | `. `' Operating System
| `- https://www.debian.org/
########################################################################
########################################################################
## This is a sample configuration file for the ftpsync mirror script. ##
## Most of the values are commented out and just shown here for ##
## completeness, together with their default value. ##
########################################################################
########################################################################
#hostname = $(kartolo.sby.datautama.net.id)
## Mirrorname. This is used for things like the trace file name and should
always
## be the full hostname of the mirror.
MIRRORNAME=`hostname -f`
## Destination of the mirrored files. Should be an empty directory.
## CAREFUL, this directory will contain the mirror. Everything else
## that might have happened to be in there WILL BE GONE after the mirror sync!
TO="/media/pub2/debian/"
## The upstream name of the rsync share.
##
## You can find out what share names your upstream mirror supports by running
## rsync YOURUPSTREAMSERVER::
## (You might have to export RSYNC_USER/RSYNC_PASSWORD for this to work)
RSYNC_PATH="debian"
## The host we mirror from
RSYNC_HOST=ftp.sg.debian.org
#RSYNC_HOST=ftp.kr.debian.org
## In case we need a user to access the rsync share at our upstream host
#RSYNC_USER=
## If we need a user we also need a password
#RSYNC_PASSWORD=
## Set to "true" to tunnel your rsync through stunnel.
##
## ftpsync will then use rsync's -e option to wrap the connection
## with bin/rsync-ssl-tunnel which sets up an stunnel to connect to
## RSYNC_SSL_PORT on the remote site. (This requires server
## support, obviously.)
##
## ftpsync can use either stunnel4, stunnel4-old, or socat to set up the
## encrypted tunnel.
## o stunnel4 requires at least stunnel4 version 5.15 built aginst openssl
## 1.0.2 or later such that the stunnel build supports the checkHost
## service-level option. This will cause stunnel to verify both the
## peer certificate's validity and that it's actually for the host we wish
## to connect to.
## o stunnel4-old will skip the checkHost check. As such it will connect
## to any peer that is able to present a valid certificate, regardless of
## which name it is made out to.
## o socat will verify the peer certificate name only starting with version
## 1.7.3 (Debian 9.0).
## To test if things work, you can run
## RSYNC_SSL_PORT=1873 RSYNC_SSL_CAPATH=/etc/ssl/certs RSYNC_SSL_METHOD=socat
rsync -e 'bin/rsync-ssl-tunnel' <server>::
#RSYNC_SSL=false
#RSYNC_SSL_PORT=1873
#RSYNC_SSL_CAPATH=/etc/ssl/certs
#RSYNC_SSL_METHOD=stunnel4
## In which directory should logfiles end up
## Note that BASEDIR defaults to $HOME, but can be set before calling the
## ftpsync script to any value you want (for example using pam_env)
LOGDIR="${BASEDIR}/log"
## Name of our own logfile.
## Note that ${NAME} is set by the ftpsync script depending on the way it
## is called. See README for a description of the multi-archive capability
## and better always include ${NAME} in this path.
LOG="${LOGDIR}/${NAME}.log"
## The script can send logs (or error messages) to a mail address.
## If this is unset it will default to the local root user unless it is run
## on a .debian.org machine where it will default to the mirroradm people.
MAILTO="[email protected]"
## If you do want a mail about every single sync, set this to false
## Everything else will only send mails if a mirror sync fails
ERRORSONLY="true"
## If you want the logs to also include output of rsync, set this to true.
## Careful, the logs can get pretty big, especially if it is the first mirror
## run
#FULLLOGS="false"
## If you do want to exclude files from the mirror run, put --exclude
statements here.
## See rsync(1) for the exact syntax, these are passed to rsync as written here.
## DO NOT TRY TO EXCLUDE ARCHITECTURES OR SUITES WITH THIS, IT WILL NOT WORK!
#EXCLUDE=""
## If you do want to exclude an architecture, this is for you.
## Use as space seperated list.
## Possible values are:
## alpha amd64 arm arm64 armel armhf hppa hurd-i386 i386 ia64 kfreebsd-amd64
## kfreebsd-i386 m68k mipsel mips powerpc ppc64el s390 s390x sh sparc source
## eg. ARCH_EXCLUDE="alpha arm arm64 armel mipsel mips s390 sparc"
## An unset value will mirror all architectures (default!)
## Mutually exclusive with ARCH_INCLUDE.
## Notice: source must not be excluded on an official/public mirror
ARCH_EXCLUDE="alpha hppa hurd-i386 ia64 armhf m68k s390 s390x sh"
## If you do want to include only a set of architectures, this is for you.
## Use as space seperated list.
## Possible values are:
## alpha amd64 arm arm64 armel armhf hppa hurd-i386 i386 ia64 kfreebsd-amd64
## kfreebsd-i386 m68k mipsel mips powerpc ppc64el s390 s390x sh sparc source
## eg. ARCH_INCLUDE="amd64 i386 source"
## An unset value will mirror all architectures (default!)
## Arch all will be included automatically if one binary arch is included.
## Mutually exclusive with ARCH_EXCLUDE.
## Notice: source needs to be included on an official/public mirror
#ARCH_INCLUDE="amd64 arm arm64 armel armhf kfreebsd-amd664 kfreebsd-i386 mpsel
mips powerpc ppc64el sh sparc source"
## Do we have leaf mirror to signal we are done and they should sync?
## If so set it to true and make sure you configure runmirrors.mirrors
## and runmirrors.conf for your need.
#HUB=false
## We do create three logfiles for every run. To save space we rotate them, this
## defines how many we keep
LOGROTATE=6
## Our own lockfile (only one sync should run at any time)
LOCK="${TO}/Archive-Update-in-Progress-${MIRRORNAME}"
# Timeout for the lockfile, in case we have bash older than v4 (and no /proc)
LOCKTIMEOUT=${LOCKTIMEOUT:-3600}
## The following file is used to make sure we will end up with a correctly
## synced mirror even if we get multiple pushes in a short timeframe
UPDATEREQUIRED="${TO}/Archive-Update-Required-${MIRRORNAME}"
## Number of seconds to sleep before retrying to sync whenever upstream
## is found to be updating while our update is running
UIPSLEEP=1200
## Number of times the update operation will be retried when upstream
## is found to be updating while our update is running.
## Note that these are retries, so: 1st attempt + retries = total attempts
UIPRETRIES=3
## The trace file is used by a mirror check tool to see when we last
## had a successful mirror sync. Make sure that it always ends up in
## project/trace and always shows the full hostname.
## This is *relative* to ${TO}
TRACE="project/trace/${MIRRORNAME}"
## The trace file can have different format/contents. Here you can select
## what it will be.
## Possible values are
## "full" - all information
## "terse" - partial, ftpsync version and local hostname
## "date" - basic, timestamp only (date -u)
## "touch" - just touch the file in existance
## "none" - no tracefile at all
##
## Default and required value for Debian mirrors is full.
EXTENDEDTRACE="full"
## The local hostname to be written to the trace file.
TRACEHOST=`hostname -f`
## We sync our mirror using rsync (everything else would be insane), so
## we need a few options set.
## The rsync program
RSYNC=rsync
## Extra rsync options as defined by the local admin.
## There is no default by ftpsync.
##
## Please note that these options are added to EVERY rsync call.
## Also note that these are added at the beginning of the rsync call, as
## the very first set of options.
## Please ensure you do not add a conflict with the usual rsync options as
## shown below.
# RSYNC_EXTRA=""
## limit I/O bandwidth. Value is KBytes per second, unset or 0 means unlimited
#RSYNC_BW=""
## BE VERY CAREFUL WHEN YOU CHANGE THE RSYNC_OPTIONS! BETTER DON'T!
## BE VERY CAREFUL WHEN YOU CHANGE THE RSYNC_OPTIONS! BETTER DON'T!
## BE VERY CAREFUL WHEN YOU CHANGE THE RSYNC_OPTIONS! BETTER DON'T!
## BE VERY CAREFUL WHEN YOU CHANGE THE RSYNC_OPTIONS! BETTER DON'T!
## Files that must *never* be deleted by rsync. These are files handled
## internally by ftpsync and will be created, updated, and deleted when
## appropriate.
#RSYNC_FILTER="--filter=protect_Archive-Update-in-Progress-${MIRRORNAME}
--filter=protect_${TRACE}
--filter=protect_Archive-Update-Required-${MIRRORNAME}"
## Default rsync options every rsync invocation sees.
#RSYNC_OPTIONS="-prltvHSB8192 --timeout 3600 --stats ${RSYNC_FILTER}"
## Options the first pass gets. We do not want the Packages/Source indices
## here, and we also do not want to delete any files yet.
#RSYNC_OPTIONS1="--exclude=Packages* --exclude=Sources* --exclude=Release*
--exclude=InRelease --include=i18n/by-hash/** --exclude=i18n/* --exclude=ls-lR*"
## Options the second pass gets. Now we want the Packages/Source indices too
## and we also want to delete files. We also want to delete files that are
## excluded.
#RSYNC_OPTIONS2="--max-delete=40000 --delay-updates --delete --delete-excluded"
## You may establish the connection via a web proxy by setting the environment
## variable RSYNC_PROXY to a hostname:port pair pointing to your web proxy.
Note
## that your web proxy's configuration must support proxy connections to port
873.
# RSYNC_PROXY=
## The following three options are used in case we want to "callback" the host
## we got pushed from.
#CALLBACKUSER="archvsync"
#CALLBACKHOST="none"
#CALLBACKKEY="none"
## Hook scripts can be run at various places during the sync.
## Leave them blank if you don't want any
## Hook1: After lock is acquired, before first rsync
## Hook2: After first rsync, if successful
## Hook3: After second rsync, if successful
## Hook4: Right before leaf mirror triggering
## Hook5: After leaf mirror trigger, only if we have slave mirrors (HUB=true)
##
## Note that Hook3 and Hook4 are likely to be called directly after each other.
## Difference is: Hook3 is called *every* time the second rsync was successful,
## but even if the mirroring needs to re-run thanks to a second push.
## Hook4 is only effective if we are done with mirroring.
#HOOK1=
#HOOK2=
#HOOK3=
#HOOK4=
#HOOK5=
