Package: linux-image Version: 3.16.0-4-amd64 Since the update from version 3.16.43 to 3.16.51-2 the kernel crashes during the boot (Dell Inc. PowerEdge 2970 with 2 Quad-Core AMD Opteron(tm) Processor 2350).
We are using Debian GNU/Linux 8, here is the kernel log we collected on our server: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-4-amd64 ([email protected]) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.51-2 (2017-12-03) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=eb8d5ccd-a904-458a-9b58-1555dbd03c95 ro console=tty0 console=ttyS0,115800 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfabffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfac0000-0x00000000bfad5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bfad6000-0x00000000bfaf5bff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfaf5c00-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xbfac0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710] [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x43fe00000-0x43fffffff] [ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43fdfffff] [ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfabffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] RAMDISK: [mem 0x36198000-0x370c3fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F22A0 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000000F231C 00008C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: FACP 0x00000000BFAF1BD8 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: DSDT 0x00000000BFAD6000 00476A (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.000000] ACPI: FACS 0x00000000BFAF4400 000040 [ 0.000000] ACPI: FACS 0x00000000BFAF4400 000040 [ 0.000000] ACPI: APIC 0x00000000BFAF1878 0000A0 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SPCR 0x00000000BFAF191C 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HPET 0x00000000BFAF1970 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: MCFG 0x00000000BFAF19AC 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SLIC 0x00000000BFAF19EC 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: ERST 0x00000000BFADA8EC 000210 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HEST 0x00000000BFADAAFC 00027C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: BERT 0x00000000BFADA76C 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: EINJ 0x00000000BFADA79C 000150 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SRAT 0x00000000000FC144 000150 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SSDT 0x00000000BFAF4800 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: TCPA 0x00000000BFAF1B70 000064 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x23fffffff] [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x240000000-0x43fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x23fffffff] -> [mem 0x00000000-0x23fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff] [ 0.000000] NODE_DATA [mem 0x23fffb000-0x23fffffff] [ 0.000000] Initmem setup node 1 [mem 0x240000000-0x43fffffff] [ 0.000000] NODE_DATA [mem 0x43fff9000-0x43fffdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x43fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0xbfabffff] [ 0.000000] node 0: [mem 0x100000000-0x23fffffff] [ 0.000000] node 1: [mem 0x240000000-0x43fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[32]) [ 0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 32-47 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[64]) [ 0.000000] IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 64-79 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x1166a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfac0000-0xbfad5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfad6000-0xbfaf4fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfaf5000-0xbfaf5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfaf6000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fc00000 s81664 r8192 d20736 u524288 [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4135515 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=eb8d5ccd-a904-458a-9b58-1555dbd03c95 ro console=tty0 console=ttyS0,115800 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xf4000000-0xf7ffffff] (64MB) [ 0.000000] AGP: Node 1: aperture [bus addr 0xf4000000-0xf7ffffff] (64MB) [ 0.000000] Memory: 16447888K/16771452K available (5291K kernel code, 949K rwdata, 1836K rodata, 1208K init, 840K bss, 323564K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:1696 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1994.799 MHz processor [ 0.000044] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.59 BogoMIPS (lpj=7979196) [ 0.010813] pid_max: default: 32768 minimum: 301 [ 0.015515] ACPI: Core revision 20140424 [ 0.023575] ACPI: All ACPI Tables successfully acquired [ 0.029105] Security Framework initialized [ 0.033283] AppArmor: AppArmor disabled by boot time parameter [ 0.039181] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.047683] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.062741] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.073502] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.080537] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.088505] Initializing cgroup subsys memory [ 0.092967] Initializing cgroup subsys devices [ 0.097528] Initializing cgroup subsys freezer [ 0.102040] Initializing cgroup subsys net_cls [ 0.106553] Initializing cgroup subsys blkio [ 0.110891] Initializing cgroup subsys perf_event [ 0.115689] Initializing cgroup subsys net_prio [ 0.120325] CPU: Physical Processor ID: 0 [ 0.124429] CPU: Processor Core ID: 0 [ 0.128158] mce: CPU supports 6 MCE banks [ 0.132242] LVT offset 0 assigned for vector 0xf9 [ 0.137019] process: using AMD E400 aware idle routine [ 0.142230] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.142230] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.142230] tlb_flushall_shift: 6 [ 0.157636] Freeing SMP alternatives memory: 20K (ffffffff81a1d000 - ffffffff81a22000) [ 0.167607] ftrace: allocating 21712 entries in 85 pages [ 0.183017] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.228793] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 2350 (fam: 10, model: 02, stepping: 03) [ 0.346385] Performance Events: AMD PMU driver. [ 0.351036] ... version: 0 [ 0.355112] ... bit width: 48 [ 0.359257] ... generic registers: 4 [ 0.363336] ... value mask: 0000ffffffffffff [ 0.368704] ... max period: 00007fffffffffff [ 0.374068] ... fixed-purpose events: 0 [ 0.378148] ... event mask: 000000000000000f [ 0.385902] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.394245] x86: Booting SMP configuration: [ 0.398500] .... node #1, CPUs: #1 [ 0.510785] .... node #0, CPUs: #2 [ 0.529455] .... node #1, CPUs: #3 [ 0.546498] .... node #0, CPUs: #4 [ 0.563595] .... node #1, CPUs: #5 [ 0.580647] .... node #0, CPUs: #6 [ 0.597752] .... node #1, CPUs: #7 [ 0.614398] x86: Booted up 2 nodes, 8 CPUs [ 0.618814] smpboot: Total of 8 processors activated (31919.11 BogoMIPS) [ 0.630350] ------------[ cut here ]------------ [ 0.635089] WARNING: CPU: 0 PID: 1 at /build/linux-i4LtiY/linux-3.16.51/kernel/sched/core.c:5811 build_sched_domains+0xc6d/0xcf0() [ 0.646896] Modules linked in: [ 0.650088] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-4-amd64 #1 Debian 3.16.51-2 [ 0.658247] Hardware name: Dell Inc. PowerEdge 2970/0W468G, BIOS 3.0.2 09/26/2008 [ 0.665801] 0000000000000000 ffffffff8151fa00 0000000000000000 0000000000000009 [ 0.673505] ffffffff81069967 0000000000000000 ffff88023769b998 ffff88023769a340 [ 0.681201] 0000000000000200 ffff88043eb09ac0 ffffffff8109c37d ffff880400000000 [ 0.688905] Call Trace: [ 0.691419] [<ffffffff8151fa00>] ? dump_stack+0x5d/0x78 [ 0.696791] [<ffffffff81069967>] ? warn_slowpath_common+0x77/0x90 [ 0.703025] [<ffffffff8109c37d>] ? build_sched_domains+0xc6d/0xcf0 [ 0.709349] [<ffffffff8192332c>] ? sched_init_smp+0x398/0x452 [ 0.715239] [<ffffffff815244de>] ? mutex_lock+0xe/0x2a [ 0.720511] [<ffffffff81069b23>] ? put_online_cpus+0x23/0x80 [ 0.726324] [<ffffffff810f284c>] ? stop_machine+0x2c/0x40 [ 0.731892] [<ffffffff8190415e>] ? kernel_init_freeable+0xdd/0x1e1 [ 0.738215] [<ffffffff81512c00>] ? rest_init+0x80/0x80 [ 0.743488] [<ffffffff81512c0a>] ? kernel_init+0xa/0xf0 [ 0.748872] [<ffffffff81525c58>] ? ret_from_fork+0x58/0x90 [ 0.754502] [<ffffffff81512c00>] ? rest_init+0x80/0x80 [ 0.759793] ---[ end trace ec42a5ac475bc516 ]--- [ 0.764474] general protection fault: 0000 [#1] SMP [ 0.769618] Modules linked in: [ 0.772796] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.16.0-4-amd64 #1 Debian 3.16.51-2 [ 0.781984] Hardware name: Dell Inc. PowerEdge 2970/0W468G, BIOS 3.0.2 09/26/2008 [ 0.789545] task: ffff8802374d52d0 ti: ffff8802374d8000 task.ti: ffff8802374d8000 [ 0.797096] RIP: 0010:[<ffffffff8109be3d>] [<ffffffff8109be3d>] build_sched_domains+0x72d/0xcf0 [ 0.806015] RSP: 0000:ffff8802374dbdf8 EFLAGS: 00010212 [ 0.811383] RAX: 0000ffff00000000 RBX: 0000000000000000 RCX: 0000000000000007 [ 0.818562] RDX: 0000000000016d48 RSI: 0000000000000000 RDI: 0000000000000200 [ 0.825742] RBP: ffff88023769b998 R08: ffff88023769a360 R09: 0000000000000101 [ 0.832931] R10: 0000000000000000 R11: ffff8802374dbb06 R12: ffff88023769a340 [ 0.840127] R13: 0000000000000200 R14: ffff88043eb09ac0 R15: 0000000000000200 [ 0.847315] FS: 0000000000000000(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000 [ 0.855478] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.861283] CR2: ffff88043ffff000 CR3: 0000000001813000 CR4: 00000000000007f0 [ 0.868479] Stack: [ 0.870546] ffff880400000000 ffff88023769a358 ffff88023769b900 ffff88043eb09ac0 [ 0.878224] 0000000000000000 0000000000000000 0000000000000000 ffff88023f827640 [ 0.885907] 0000000000000000 000000000000f1c8 ffffffff00000000 0000000000000000 [ 0.893602] Call Trace: [ 0.896120] [<ffffffff8192332c>] ? sched_init_smp+0x398/0x452 [ 0.902009] [<ffffffff815244de>] ? mutex_lock+0xe/0x2a [ 0.907282] [<ffffffff81069b23>] ? put_online_cpus+0x23/0x80 [ 0.913084] [<ffffffff810f284c>] ? stop_machine+0x2c/0x40 [ 0.918648] [<ffffffff8190415e>] ? kernel_init_freeable+0xdd/0x1e1 [ 0.924968] [<ffffffff81512c00>] ? rest_init+0x80/0x80 [ 0.930250] [<ffffffff81512c0a>] ? kernel_init+0xa/0xf0 [ 0.935628] [<ffffffff81525c58>] ? ret_from_fork+0x58/0x90 [ 0.941265] [<ffffffff81512c00>] ? rest_init+0x80/0x80 [ 0.946549] Code: c0 0f 85 46 05 00 00 48 8b 74 24 08 48 c7 c2 00 dd a6 81 bf ff ff ff ff e8 91 78 21 00 48 98 49 8b 56 10 48 8b 04 c5 a0 1e 8e 81 <48> 8b 14 10 b8 01 00 00 00 49 89 54 24 10 f0 0f c1 02 85 c0 75 [ 0.969099] RIP [<ffffffff8109be3d>] build_sched_domains+0x72d/0xcf0 [ 0.975657] RSP <ffff8802374dbdf8> [ 0.979219] ---[ end trace ec42a5ac475bc517 ]--- [ 0.983914] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.983914] [ 0.993136] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Best regards, Damien Dejean.
