Package: src:linux
Version: 4.14.12-2
Severity: normal
Dear Maintainer,
i bought a modecom freetab 8010 about 2 years ago.
it came with win8 preinstalled, but i instantly put
debian sid on it. unfortunately, it have no usb otg
support in it's bios, so i have no control over it's
bios nor grub so until i desolder the flash from it,
i cannot recover the tab and provide you anything
specific from the cpu nor other details.
and keep in mind that this report is generated on a
similar i686-pae machice with the same packages, and
both machines were upgraded today, so they have the
package versions too... the only hidden detail is
the exact cpu type of the tab.
as far as i can remember, it had 1gb ram from which
about 800m was availabe to the cpu, the remaining
was for the vga. it was an intel cpu, but i really
cannot remember that exacly which one.
i used an 2gb /swap.bin file on it's ext4 rootfs,
and it had an realtek RTL8723BE. this is sure because
after every kernel upgrade, i had to use the usb otg
cable with an usb ethernet dongle to reach it again,
and compile the kernel module... and i was very happy
when in 4.14 the driver arrived to staging area and
soon you started precompiling it for me...:)
so after upgrading from 4.14.0-2 to 4.14.0-3 the
tab stopped booting anymore, after the grub, the
frist thing i see on the display is the kernel painc.
when the bug opens, i'll send a separate mail with
the screenshots.
ps: don't be upset, i known that this time will come,
i'm already prepared for it mentally...:)
-- Package-specific info:
** Version:
Linux version 4.14.0-3-686-pae (debian-ker...@lists.debian.org) (gcc version
7.2.0 (Debian 7.2.0-18)) #1 SMP Debian 4.14.12-2 (2018-01-06)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.14.0-3-686-pae
root=UUID=5c00919b-3e1a-48be-a40b-3bdb2395c7a1 ro quiet
** Not tainted
** Kernel log:
[ 8856.892067] usb 4-1: reset low-speed USB device number 9 using uhci_hcd
[ 8924.548177] usb 4-1: reset low-speed USB device number 9 using uhci_hcd
[ 8995.780079] usb 4-1: reset low-speed USB device number 9 using uhci_hcd
[ 9063.364221] usb 4-1: reset low-speed USB device number 9 using uhci_hcd
[ 9131.112223] usb 4-1: reset low-speed USB device number 9 using uhci_hcd
[ 9197.500146] usb 4-1: USB disconnect, device number 9
[ 9197.772191] usb 4-1: new low-speed USB device number 10 using uhci_hcd
[ 9197.968249] usb 4-1: New USB device found, idVendor=0c45, idProduct=7401
[ 9197.968257] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9197.968262] usb 4-1: Product: TEMPerV1.4
[ 9197.968266] usb 4-1: Manufacturer: RDing
[ 9197.991614] input: RDing TEMPerV1.4 as
/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:0C45:7401.0011/input/input17
[ 9198.049741] hid-generic 0003:0C45:7401.0011: input,hidraw0: USB HID v1.10
Keyboard [RDing TEMPerV1.4] on usb-0000:00:1d.2-1/input0
[ 9198.065869] hid-generic 0003:0C45:7401.0012: hiddev0,hidraw1: USB HID v1.10
Device [RDing TEMPerV1.4] on usb-0000:00:1d.2-1/input1
[ 9263.696233] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[ 9329.224231] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[ 9394.848081] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[ 9463.200229] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[ 9529.448679] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[ 9595.184199] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[ 9661.368222] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[ 9726.924604] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[ 9796.596086] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[ 9862.436148] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[ 9928.076231] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[ 9993.348250] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[10059.204213] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[10124.812088] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[10190.388224] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[10256.112089] usb 4-1: reset low-speed USB device number 10 using uhci_hcd
[10322.676295] usb 4-1: USB disconnect, device number 10
[10323.100194] usb 4-1: new low-speed USB device number 11 using uhci_hcd
[10323.295497] usb 4-1: New USB device found, idVendor=0c45, idProduct=7401
[10323.295504] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[10323.295509] usb 4-1: Product: TEMPerV1.4
[10323.295514] usb 4-1: Manufacturer: RDing
[10323.319554] input: RDing TEMPerV1.4 as
/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:0C45:7401.0013/input/input18
[10323.378550] hid-generic 0003:0C45:7401.0013: input,hidraw0: USB HID v1.10
Keyboard [RDing TEMPerV1.4] on usb-0000:00:1d.2-1/input0
[10323.396439] hid-generic 0003:0C45:7401.0014: hiddev0,hidraw1: USB HID v1.10
Device [RDing TEMPerV1.4] on usb-0000:00:1d.2-1/input1
[10387.608087] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[10453.640217] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[10519.624094] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[10585.232222] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[10650.960221] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[10716.768227] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[10782.696246] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[10848.452228] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[10914.412285] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[10979.556083] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[11045.572218] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[11111.348237] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[11177.268213] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[11243.692237] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[11312.552220] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[11378.600224] usb 4-1: reset low-speed USB device number 11 using uhci_hcd
[11451.076295] usb 4-1: USB disconnect, device number 11
[11451.348247] usb 4-1: new low-speed USB device number 12 using uhci_hcd
[11451.543736] usb 4-1: New USB device found, idVendor=0c45, idProduct=7401
[11451.543743] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[11451.543748] usb 4-1: Product: TEMPerV1.4
[11451.543753] usb 4-1: Manufacturer: RDing
[11451.568547] input: RDing TEMPerV1.4 as
/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:0C45:7401.0015/input/input19
[11451.630050] hid-generic 0003:0C45:7401.0015: input,hidraw0: USB HID v1.10
Keyboard [RDing TEMPerV1.4] on usb-0000:00:1d.2-1/input0
[11451.645352] hid-generic 0003:0C45:7401.0016: hiddev0,hidraw1: USB HID v1.10
Device [RDing TEMPerV1.4] on usb-0000:00:1d.2-1/input1
[11516.648221] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[11584.432225] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[11650.560204] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[11716.456223] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[11784.200151] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[11851.912226] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[11919.144117] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[11985.804229] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[12051.972084] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[12118.516086] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[12184.700244] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[12250.436223] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[12316.220224] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[12382.372223] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[12447.944211] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[12513.632083] usb 4-1: reset low-speed USB device number 12 using uhci_hcd
[12580.220147] usb 4-1: USB disconnect, device number 12
[12580.652067] usb 4-1: new low-speed USB device number 13 using uhci_hcd
[12580.847988] usb 4-1: New USB device found, idVendor=0c45, idProduct=7401
[12580.847994] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12580.847998] usb 4-1: Product: TEMPerV1.4
[12580.848038] usb 4-1: Manufacturer: RDing
[12580.873118] input: RDing TEMPerV1.4 as
/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:0C45:7401.0017/input/input20
[12580.934269] hid-generic 0003:0C45:7401.0017: input,hidraw0: USB HID v1.10
Keyboard [RDing TEMPerV1.4] on usb-0000:00:1d.2-1/input0
[12580.950429] hid-generic 0003:0C45:7401.0018: hiddev0,hidraw1: USB HID v1.10
Device [RDing TEMPerV1.4] on usb-0000:00:1d.2-1/input1
[12645.504225] usb 4-1: reset low-speed USB device number 13 using uhci_hcd
[12711.520227] usb 4-1: reset low-speed USB device number 13 using uhci_hcd
[12779.240221] usb 4-1: reset low-speed USB device number 13 using uhci_hcd
[12845.416218] usb 4-1: reset low-speed USB device number 13 using uhci_hcd
[12913.160116] usb 4-1: reset low-speed USB device number 13 using uhci_hcd
[12978.324215] usb 4-1: reset low-speed USB device number 13 using uhci_hcd
[13043.724235] usb 4-1: reset low-speed USB device number 13 using uhci_hcd
[13108.908055] usb 4-1: reset low-speed USB device number 13 using uhci_hcd
[13174.412046] usb 4-1: reset low-speed USB device number 13 using uhci_hcd
[13240.036222] usb 4-1: reset low-speed USB device number 13 using uhci_hcd
[13308.412142] usb 4-1: reset low-speed USB device number 13 using uhci_hcd
** Model information
** Loaded modules:
lib80211_crypt_ccmp
tun
binfmt_misc
iTCO_wdt
iTCO_vendor_support
btusb
btrtl
btbcm
btintel
bluetooth
drbg
ansi_cprng
ecdh_generic
dell_laptop
dell_smbios
dcdbas
dell_smm_hwmon
radeon
lpc_ich
snd_intel8x0m
snd_intel8x0
mfd_core
pcspkr
snd_ac97_codec
ac97_bus
ttm
snd_pcm_oss
drm_kms_helper
snd_mixer_oss
pcmcia
joydev
evdev
serio_raw
rng_core
ipw2200
drm
sg
snd_pcm
libipw
lib80211
yenta_socket
cfg80211
snd_timer
snd
soundcore
pcmcia_rsrc
pcmcia_core
i2c_algo_bit
rfkill
button
battery
shpchp
video
ac
acpi_cpufreq
loop
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
crypto_simd
cryptd
aes_i586
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid1
raid0
multipath
linear
md_mod
dm_mirror
dm_region_hash
dm_log
dm_mod
hid_generic
usbhid
hid
sd_mod
sr_mod
cdrom
ata_generic
ata_piix
ahci
libahci
psmouse
libata
scsi_mod
ehci_pci
tg3
ptp
pps_core
libphy
uhci_hcd
ehci_hcd
usbcore
usb_common
thermal
** Network interface configuration:
iface lo inet loopback
auto lo
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,ALLMULTI,PROMISC,UP,LOWER_UP> mtu 1500 qdisc mq
state UP group default qlen 1000
link/ether 00:12:3f:f2:75:ff brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 00:13:ce:54:ac:b4 brd ff:ff:ff:ff:ff:ff
4: tap20001: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UNKNOWN group default qlen 1000
link/ether 72:f1:9d:3c:12:a4 brd ff:ff:ff:ff:ff:ff
inet 10.6.255.1/24 brd 10.6.255.255 scope global tap20001
valid_lft forever preferred_lft forever
inet6 2001:db8:6255:0:70f1:9dff:fe3c:12a4/64 scope global dynamic
mngtmpaddr
valid_lft 2591899sec preferred_lft 604699sec
inet6 fe80::70f1:9dff:fe3c:12a4/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
tap20001: 1263769 5463 0 0 0 0 0 0 2028778
5785 0 0 0 0 0 0
eth0: 78188363 254210 0 0 0 0 0 3429 37749660
194302 0 0 0 0 0 0
wlan0: 21311573 154781 31 31 0 0 0 0 30469403
133701 0 0 0 0 0 0
lo: 409475678 1978130 0 0 0 0 0 0 409475678
1978130 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
2053379 total packets received
58526 with invalid addresses
0 forwarded
0 incoming packets discarded
1981714 incoming packets delivered
1982572 requests sent out
Icmp:
3288 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
destination unreachable: 3288
3251 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 3246
echo requests: 5
IcmpMsg:
InType3: 3288
OutType3: 3246
OutType8: 5
Tcp:
11 active connection openings
2 passive connection openings
0 failed connection attempts
0 connection resets received
1 connections established
3441 segments received
4637 segments sent out
0 segments retransmitted
0 bad segments received
12 resets sent
Udp:
1972396 packets received
3237 packets to unknown port received
19 packet receive errors
1975715 packets sent
19 receive buffer errors
0 send buffer errors
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
26 delayed acks sent
1067 packet headers predicted
547 acknowledgments not containing data payload received
1665 predicted acknowledgments
Detected reordering 3 times using SACK
TCPDSACKRecv: 1
6 connections reset due to unexpected data
TCPDSACKIgnoredNoUndo: 1
TCPSackShifted: 1
TCPSackMerged: 1
TCPSackShiftFallback: 7
TCPRcvCoalesce: 19
TCPOFOQueue: 1
TCPOrigDataSent: 4119
TCPHystartDelayDetect: 2
TCPHystartDelayCwnd: 140
IpExt:
InMcastPkts: 220
InOctets: 417789810
OutOctets: 411181583
InMcastOctets: 7040
InNoECTPkts: 2053379
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML
Express Processor to DRAM Controller [8086:2590] (rev 03)
Subsystem: Dell Dell Latitude C610 [1028:0182]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI
Express Root Port [8086:2591] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dfd00000-dfefffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dfc00000-dfcfffff
Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI [1028:0182]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI [1028:0182]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI [1028:0182]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI [1028:0182]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI
Controller [1028:0182]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=04, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: dfb00000-dfbfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1e.2 Multimedia audio controller [0401]: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
Subsystem: Dell Latitude D610 Laptop [1028:0182]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ed00 [size=256]
Region 1: I/O ports at ec40 [size=64]
Region 2: Memory at dffffe00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at dffffd00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
Kernel modules: snd_intel8x0
00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
AC'97 Modem Controller [8086:266d] (rev 03) (prog-if 00 [Generic])
Subsystem: Conexant Systems, Inc. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
AC'97 Modem Controller [14f1:5423]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ee00 [size=256]
Region 1: I/O ports at ec80 [size=128]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0m
Kernel modules: snd_intel8x0m
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface
Bridge [8086:2641] (rev 03)
Subsystem: Dell 82801FBM (ICH6M) LPC Interface Bridge [1028:0182]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
Kernel modules: intel_rng, lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA
Controller [8086:2653] (rev 03) (prog-if 80 [Master])
Subsystem: Dell 82801FBM (ICH6M) SATA Controller [1028:0182]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at bfa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ahci, ata_piix, ata_generic
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] RV370/M22 [Mobility Radeon X300] [1002:5460] (prog-if 00 [VGA
controller])
Subsystem: Dell RV370/M22 [Mobility Radeon X300] [1028:2006]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at de00 [size=256]
Region 2: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeonfb, radeon
02:00.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5751 Gigabit
Ethernet PCI Express [14e4:1677] (rev 01)
Subsystem: Dell Latitude D610 [1028:0182]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfcf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
03:01.0 CardBus bridge [0607]: Texas Instruments PCI6515 Cardbus Controller
[104c:8036]
Subsystem: Dell PCI6515 Cardbus Controller [1028:0182]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 44000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=04, sec-latency=176
Memory window 0: 48000000-4bffffff (prefetchable)
Memory window 1: 4c000000-4fffffff
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
03:01.5 Communication controller [0780]: Texas Instruments PCI6515 SmartCard
Controller [104c:8038]
Subsystem: Dell PCI6515 SmartCard Controller [1028:0182]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dfbfd000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at dfbfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
03:03.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG
[Calexico2] Network Connection [8086:4220] (rev 05)
Subsystem: Intel Corporation Dell Latitude D600 [8086:2722]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dfbff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
Kernel modules: ipw2200
** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 013: ID 0c45:7401 Microdia TEMPer Temperature Sensor
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: buster/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 4.14.0-3-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1), LANGUAGE=en_US
(charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.14.0-3-686-pae depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 24-1
ii linux-base 4.5
Versions of packages linux-image-4.14.0-3-686-pae recommends:
pn apparmor <none>
ii firmware-linux-free 3.4
ii irqbalance 1.3.0-0.1
Versions of packages linux-image-4.14.0-3-686-pae suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:6.03+dfsg1-2
ii grub-pc 2.02-2
pn linux-doc-4.14 <none>
Versions of packages linux-image-4.14.0-3-686-pae is related to:
ii firmware-amd-graphics 20170823-1
ii firmware-atheros 20170823-1
ii firmware-bnx2 20170823-1
ii firmware-bnx2x 20170823-1
ii firmware-brcm80211 20170823-1
ii firmware-cavium 20170823-1
ii firmware-intel-sound 20170823-1
ii firmware-intelwimax 20170823-1
ii firmware-ipw2x00 20170823-1
ii firmware-ivtv 20170823-1
ii firmware-iwlwifi 20170823-1
ii firmware-libertas 20170823-1
ii firmware-linux-nonfree 20170823-1
ii firmware-misc-nonfree 20170823-1
ii firmware-myricom 20170823-1
ii firmware-netxen 20170823-1
ii firmware-qlogic 20170823-1
ii firmware-realtek 20170823-1
ii firmware-samsung 20170823-1
ii firmware-siano 20170823-1
ii firmware-ti-connectivity 20170823-1
pn xen-hypervisor <none>
-- no debconf information
