Not fixed
random: Trying to read entropy from /dev/random
Configuration file: /etc/hostapd/hostapd.conf
ctrl_interface_group=4 (from group name 'adm')
nl80211: TDLS supported
nl80211: TDLS external setup
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Using driver-based off-channel TX
nl80211: TDLS channel switch
nl80211: Driver-advertised extended capabilities (default) -
hexdump(len=8): 04 00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities mask (default) -
hexdump(len=8): 04 00 00 00 00 00 00 40
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: Enable multi-channel concurrent (driver advertised support)
nl80211: use P2P_DEVICE support
nl80211: interface wlan0 in phy phy0
nl80211: Set mode ifindex 4 iftype 3 (AP)
nl80211: Failed to set interface 4 to mode 3: -16 (Device or resource busy)
nl80211: Try mode change after setting interface down
nl80211: Set mode ifindex 4 iftype 3 (AP)
nl80211: Mode change succeeded while interface is down
nl80211: Setup AP(wlan0) - device_ap_sme=0 use_monitor=0
nl80211: Subscribe to mgmt frames with AP handle 0x555d9de51e20
nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH)
nl_handle=0x555d9de51e20 match=
nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ)
nl_handle=0x555d9de51e20 match=
nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ)
nl_handle=0x555d9de51e20 match=
nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC)
nl_handle=0x555d9de51e20 match=
nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH)
nl_handle=0x555d9de51e20 match=
nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ)
nl_handle=0x555d9de51e20 match=
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x555d9de51e20 match=04
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x555d9de51e20 match=0501
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x555d9de51e20 match=0503
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x555d9de51e20 match=0504
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x555d9de51e20 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x555d9de51e20 match=08
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x555d9de51e20 match=09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x555d9de51e20 match=0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x555d9de51e20 match=11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION)
nl_handle=0x555d9de51e20 match=7f
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
nl80211: Add own interface ifindex 7 (ifidx_reason 4)
nl80211: if_indices[16]: 7(4)
nl80211: Add own interface ifindex 4 (ifidx_reason -1)
nl80211: if_indices[16]: 7(4) 4(-1)
nl80211: Adding interface wlan0 into bridge eth1
phy: phy0
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Previous country code 00, new country code US
Continue interface setup after channel list update
ctrl_iface not configured!
random: Got 20/20 bytes from /dev/random
RTM_NEWLINK: ifi_index=4 ifname=wlan0 operstate=2 linkmode=0
ifi_family=0 ifi_flags=0x1002 ()
nl80211: Ignore interface down event since interface wlan0 is up
RTM_NEWLINK: ifi_index=4 ifname=wlan0 operstate=2 linkmode=0
ifi_family=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK: ifi_index=4 ifname=wlan0 operstate=2 linkmode=0 master=7
ifi_family=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK: ifi_index=4 ifname=wlan0 operstate=2 linkmode=0 master=7
ifi_family=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK: ifi_index=4 ifname=wlan0 master=7 operstate=2 ifi_family=7
ifi_flags=0x1003 ([UP])
nl80211: Add ifindex 7 for bridge eth1
nl80211: Add own interface ifindex 7 (ifidx_reason 4)
nl80211: ifindex 7 already in the list
RTM_NEWLINK: ifi_index=7 ifname=eth1 operstate=6 linkmode=0 ifi_family=0
ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
wlan0: Event INTERFACE_STATUS (5) received
Unknown event 5
Channel list update timeout - try to continue anyway
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
ACS: Automatic channel selection started, this may take a bit
ACS: Scanning 1 / 5
wlan0: nl80211: scan request
nl80211: Passive scan requested
Scan requested (ret=0) - scan timeout 10 seconds
wlan0: interface state COUNTRY_UPDATE->ACS
wlan0: ACS-STARTED
Interface initialization will be completed in a callback (ACS)
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (46) received
Unknown event 46
RTM_NEWLINK: ifi_index=4 ifname=wlan0 wext ifi_family=0 ifi_flags=0x1003
([UP])
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442
2447 2452 2457 2462 2467 2472
wlan0: Event SCAN_RESULTS (3) received
ACS: Using survey based algorithm (acs_num_scans=5)
nl80211: Fetch survey data
wlan0: Event SURVEY (45) received
No survey data received
ACS: Scanning 2 / 5
wlan0: nl80211: scan request
nl80211: Passive scan requested
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (46) received
Unknown event 46
RTM_NEWLINK: ifi_index=4 ifname=wlan0 wext ifi_family=0 ifi_flags=0x1003
([UP])
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442
2447 2452 2457 2462 2467 2472
wlan0: Event SCAN_RESULTS (3) received
ACS: Using survey based algorithm (acs_num_scans=5)
nl80211: Fetch survey data
wlan0: Event SURVEY (45) received
No survey data received
ACS: Scanning 3 / 5
wlan0: nl80211: scan request
nl80211: Passive scan requested
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (46) received
Unknown event 46
RTM_NEWLINK: ifi_index=4 ifname=wlan0 wext ifi_family=0 ifi_flags=0x1003
([UP])
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442
2447 2452 2457 2462 2467 2472
wlan0: Event SCAN_RESULTS (3) received
ACS: Using survey based algorithm (acs_num_scans=5)
nl80211: Fetch survey data
wlan0: Event SURVEY (45) received
No survey data received
ACS: Scanning 4 / 5
wlan0: nl80211: scan request
nl80211: Passive scan requested
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (46) received
Unknown event 46
RTM_NEWLINK: ifi_index=4 ifname=wlan0 wext ifi_family=0 ifi_flags=0x1003
([UP])
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442
2447 2452 2457 2462 2467 2472
wlan0: Event SCAN_RESULTS (3) received
ACS: Using survey based algorithm (acs_num_scans=5)
nl80211: Fetch survey data
wlan0: Event SURVEY (45) received
No survey data received
ACS: Scanning 5 / 5
wlan0: nl80211: scan request
nl80211: Passive scan requested
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (46) received
Unknown event 46
RTM_NEWLINK: ifi_index=4 ifname=wlan0 wext ifi_family=0 ifi_flags=0x1003
([UP])
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442
2447 2452 2457 2462 2467 2472
wlan0: Event SCAN_RESULTS (3) received
ACS: Using survey based algorithm (acs_num_scans=5)
nl80211: Fetch survey data
wlan0: Event SURVEY (45) received
No survey data received
ACS: Trying survey-based ACS
ACS: Unable to collect survey data
ACS: All study options have failed
Interface initialization failed
wlan0: interface state ACS->DISABLED
wlan0: AP-DISABLED
ACS: Possibly channel configuration is invalid, please report this along
with your config file.
ACS: Failed to start
wlan0: AP-DISABLED
wlan0: Deauthenticate all stations
nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0
offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=0
nl80211: send_frame -> send_frame_cmd
nl80211: Frame command failed: ret=-22 (Invalid argument) (freq=0 wait=0)
hostapd_free_hapd_data: Interface wlan0 wasn't started
hostapd_deinit_driver: driver=0x555d9c7a8ac0 drv_priv=0x555d9de4c880 ->
hapd_deinit
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
nl80211: Remove monitor interface: refcount=0
nl80211: Remove beacon (ifindex=4)
netlink: Operstate: ifindex=4 linkmode=0 (kernel-control), operstate=6
(IF_OPER_UP)
nl80211: Set mode ifindex 4 iftype 2 (STATION)
nl80211: Failed to set interface 4 to mode 2: -16 (Device or resource busy)
nl80211: Try mode change after setting interface down
nl80211: Set mode ifindex 4 iftype 2 (STATION)
nl80211: Mode change succeeded while interface is down
nl80211: Teardown AP(wlan0) - device_ap_sme=0 use_monitor=0
nl80211: Unsubscribe mgmt frames handle 0x8888ddd5156d96a9 (AP teardown)
hostapd_deinit_driver:bss[0]->drv_priv=0x555d9de4c880
hostapd_cleanup_iface_partial(0x555d9de47ec0)
Interface wlan0 disabled
wlan0: interface state DISABLED->DISABLED
hostapd_interface_deinit_free(0x555d9de47ec0)
hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1
hostapd_interface_deinit(0x555d9de47ec0)
wlan0: interface state DISABLED->DISABLED
hostapd_bss_deinit: deinit bss wlan0
wlan0: AP-DISABLED
hostapd_cleanup(hapd=0x555d9de491d0 (wlan0))
wlan0: CTRL-EVENT-TERMINATING
hostapd_free_hapd_data: Interface wlan0 wasn't started
hostapd_interface_deinit_free: driver=0x555d9c7a8ac0 drv_priv=(nil) ->
hapd_deinit
hostapd_interface_free(0x555d9de47ec0)
hostapd_interface_free: free hapd 0x555d9de491d0
hostapd_cleanup_iface(0x555d9de47ec0)
hostapd_cleanup_iface_partial(0x555d9de47ec0)
hostapd_cleanup_iface: free iface=0x555d9de47ec0
