Package: linux-image-4.18-0-0.bpo.1-amd64
Version: linux-image-4.18.0-0.bpo.1-amd64
Severity: minor

Dear Maintainer,

Today i tried a suspend on my system and it resulted in backtrace in dmesg,
but system was not affected by this. According the backtrace it was some
trouble with amdgpu. I'we tried few times again but the backtrace did not
appear again without rebooting the system. I dont know yet what triggered this.
I attaching a file with information from dmesg.

Thank you for your time

I hope this helps improve debians stability.
-- System Information:
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.18.0-0.bpo.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), 
LANGUAGE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
2018-09-29T14:22:10.192483+02:00 debian kernel: [ 9243.482562] PM: suspend 
entry (deep)
2018-09-29T14:22:20.898486+02:00 debian kernel: [ 9243.482565] PM: Syncing 
filesystems ... done.
2018-09-29T14:22:20.898568+02:00 debian kernel: [ 9243.527463] Freezing user 
space processes ... (elapsed 0.002 seconds) done.
2018-09-29T14:22:20.898571+02:00 debian kernel: [ 9243.530090] OOM killer 
disabled.
2018-09-29T14:22:20.898573+02:00 debian kernel: [ 9243.530092] Freezing 
remaining freezable tasks ... (elapsed 0.002 seconds) done.
2018-09-29T14:22:20.898573+02:00 debian kernel: [ 9243.532308] Suspending 
console(s) (use no_console_suspend to debug)
2018-09-29T14:22:20.898574+02:00 debian kernel: [ 9243.553250] sd 1:0:0:0: 
[sda] Synchronizing SCSI cache
2018-09-29T14:22:20.898592+02:00 debian kernel: [ 9243.553251] sd 2:0:0:0: 
[sdb] Synchronizing SCSI cache
2018-09-29T14:22:20.898593+02:00 debian kernel: [ 9243.553483] sd 2:0:0:0: 
[sdb] Stopping disk
2018-09-29T14:22:20.898594+02:00 debian kernel: [ 9243.575594] sd 1:0:0:0: 
[sda] Stopping disk
2018-09-29T14:22:20.898595+02:00 debian kernel: [ 9243.707832] amdgpu 
0000:00:01.0: 0000000083582941 unpin not necessary
2018-09-29T14:22:20.898596+02:00 debian kernel: [ 9244.333090] 
pci_raw_set_power_state: 5 callbacks suppressed
2018-09-29T14:22:20.898597+02:00 debian kernel: [ 9244.333095] snd_hda_intel 
0000:00:09.2: Refused to change power state, currently in D0
2018-09-29T14:22:20.898598+02:00 debian kernel: [ 9244.393115] ACPI: Preparing 
to enter system sleep state S3
2018-09-29T14:22:20.898599+02:00 debian kernel: [ 9244.707658] PM: Saving 
platform NVS memory
2018-09-29T14:22:20.898600+02:00 debian kernel: [ 9244.707748] Disabling 
non-boot CPUs ...
2018-09-29T14:22:20.898600+02:00 debian kernel: [ 9244.721578] IRQ 26: no 
longer affine to CPU1
2018-09-29T14:22:20.898601+02:00 debian kernel: [ 9244.721589] IRQ 37: no 
longer affine to CPU1
2018-09-29T14:22:20.898602+02:00 debian kernel: [ 9244.721593] IRQ 38: no 
longer affine to CPU1
2018-09-29T14:22:20.898603+02:00 debian kernel: [ 9244.721598] IRQ 40: no 
longer affine to CPU1
2018-09-29T14:22:20.898603+02:00 debian kernel: [ 9244.721603] IRQ 42: no 
longer affine to CPU1
2018-09-29T14:22:20.898604+02:00 debian kernel: [ 9244.721609] IRQ 43: no 
longer affine to CPU1
2018-09-29T14:22:20.898605+02:00 debian kernel: [ 9244.721613] IRQ 44: no 
longer affine to CPU1
2018-09-29T14:22:20.898605+02:00 debian kernel: [ 9244.722702] smpboot: CPU 1 
is now offline
2018-09-29T14:22:20.898606+02:00 debian kernel: [ 9244.745468] IRQ 19: no 
longer affine to CPU2
2018-09-29T14:22:20.898607+02:00 debian kernel: [ 9244.745509] IRQ 52: no 
longer affine to CPU2
2018-09-29T14:22:20.898607+02:00 debian kernel: [ 9244.746527] smpboot: CPU 2 
is now offline
2018-09-29T14:22:20.898608+02:00 debian kernel: [ 9244.769420] IRQ 1: no longer 
affine to CPU3
2018-09-29T14:22:20.898609+02:00 debian kernel: [ 9244.770494] smpboot: CPU 3 
is now offline
2018-09-29T14:22:20.898609+02:00 debian kernel: [ 9244.771422] ACPI: Low-level 
resume complete
2018-09-29T14:22:20.898610+02:00 debian kernel: [ 9244.771457] PM: Restoring 
platform NVS memory
2018-09-29T14:22:20.898611+02:00 debian kernel: [ 9244.771540] LVT offset 0 
assigned for vector 0x400
2018-09-29T14:22:20.898611+02:00 debian kernel: [ 9244.771756] Enabling 
non-boot CPUs ...
2018-09-29T14:22:20.898612+02:00 debian kernel: [ 9244.771796] x86: Booting SMP 
configuration:
2018-09-29T14:22:20.898613+02:00 debian kernel: [ 9244.771797] smpboot: Booting 
Node 0 Processor 1 APIC 0x11
2018-09-29T14:22:20.898614+02:00 debian kernel: [ 9244.774098]  cache: parent 
cpu1 should not be sleeping
2018-09-29T14:22:20.898615+02:00 debian kernel: [ 9244.774169] microcode: CPU1: 
patch_level=0x06006118
2018-09-29T14:22:20.898615+02:00 debian kernel: [ 9244.774294] CPU1 is up
2018-09-29T14:22:20.898616+02:00 debian kernel: [ 9244.774319] smpboot: Booting 
Node 0 Processor 2 APIC 0x12
2018-09-29T14:22:20.898617+02:00 debian kernel: [ 9244.776750]  cache: parent 
cpu2 should not be sleeping
2018-09-29T14:22:20.898617+02:00 debian kernel: [ 9244.776825] microcode: CPU2: 
patch_level=0x06006118
2018-09-29T14:22:20.898618+02:00 debian kernel: [ 9244.776977] CPU2 is up
2018-09-29T14:22:20.898619+02:00 debian kernel: [ 9244.776993] smpboot: Booting 
Node 0 Processor 3 APIC 0x13
2018-09-29T14:22:20.898619+02:00 debian kernel: [ 9244.779286]  cache: parent 
cpu3 should not be sleeping
2018-09-29T14:22:20.898620+02:00 debian kernel: [ 9244.779359] microcode: CPU3: 
patch_level=0x06006118
2018-09-29T14:22:20.898620+02:00 debian kernel: [ 9244.779512] CPU3 is up
2018-09-29T14:22:20.898621+02:00 debian kernel: [ 9244.780017] ACPI: Waking up 
from system sleep state S3
2018-09-29T14:22:20.898622+02:00 debian kernel: [ 9244.887531] [drm] PCIE GART 
of 1024M enabled (table at 0x000000F400000000).
2018-09-29T14:22:20.898622+02:00 debian kernel: [ 9244.887548] usb usb3: root 
hub lost power or was reset
2018-09-29T14:22:20.898623+02:00 debian kernel: [ 9244.887550] usb usb4: root 
hub lost power or was reset
2018-09-29T14:22:20.898624+02:00 debian kernel: [ 9244.897629] sd 1:0:0:0: 
[sda] Starting disk
2018-09-29T14:22:20.898624+02:00 debian kernel: [ 9244.897630] sd 2:0:0:0: 
[sdb] Starting disk
2018-09-29T14:22:20.898625+02:00 debian kernel: [ 9244.959785] [drm] SADs count 
is: -2, don't need to read it
2018-09-29T14:22:20.898626+02:00 debian kernel: [ 9244.960799] WARNING: CPU: 3 
PID: 23442 at 
/build/linux-GVmoCH/linux-4.18.6/drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:710
 dm_resume+0x1b7/0x230 [amdgpu]
2018-09-29T14:22:20.898627+02:00 debian kernel: [ 9244.960800] Modules linked 
in: pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) xt_tcpudp 
xt_conntrack iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat 
nf_conntrack iptable_filter binfmt_misc dm_thin_pool dm_persistent_data 
dm_bio_prison dm_bufio amdkfd eeepc_wmi libcrc32c asus_wmi sparse_keymap amdgpu 
rfkill wmi_bmof edac_mce_amd kvm_amd ccp chash gpu_sched ttm rng_core 
snd_hda_codec_realtek kvm drm_kms_helper snd_hda_codec_generic 
snd_hda_codec_hdmi snd_hda_intel irqbypass snd_hda_codec drm crct10dif_pclmul 
crc32_pclmul snd_hda_core ghash_clmulni_intel pcspkr evdev snd_hwdep sg 
serio_raw snd_pcm i2c_algo_bit snd_timer k10temp fam15h_power snd wmi video 
soundcore sp5100_tco button pcc_cpufreq acpi_cpufreq parport_pc ppdev lp 
parport ip_tables x_tables autofs4 ext4 crc16
2018-09-29T14:22:20.898628+02:00 debian kernel: [ 9244.960835]  mbcache jbd2 
crc32c_generic fscrypto ecb sr_mod cdrom dm_mod hid_generic uas usbhid 
usb_storage hid sd_mod crc32c_intel aesni_intel aes_x86_64 crypto_simd cryptd 
glue_helper ahci xhci_pci libahci xhci_hcd i2c_piix4 libata r8169 mii usbcore 
scsi_mod usb_common gpio_amdpt gpio_generic
2018-09-29T14:22:20.898629+02:00 debian kernel: [ 9244.960854] CPU: 3 PID: 
23442 Comm: kworker/u32:26 Tainted: G           O      4.18.0-0.bpo.1-amd64 #1 
Debian 4.18.6-1~bpo9+1
2018-09-29T14:22:20.898631+02:00 debian kernel: [ 9244.960855] Hardware name: 
System manufacturer System Product Name/PRIME A320M-K, BIOS 3401 12/04/2017
2018-09-29T14:22:20.898631+02:00 debian kernel: [ 9244.960858] Workqueue: 
events_unbound async_run_entry_fn
2018-09-29T14:22:20.898632+02:00 debian kernel: [ 9244.960895] RIP: 
0010:dm_resume+0x1b7/0x230 [amdgpu]
2018-09-29T14:22:20.898633+02:00 debian kernel: [ 9244.960896] Code: ef e8 6d 
03 af ff 48 c7 83 b0 b7 00 00 00 00 00 00 89 c5 48 89 df e8 38 1a 00 00 89 e8 
5b 5d 41 5c 41 5d 41 5e c3 0f 0b eb ac <0f> 0b e9 44 ff ff ff 4d 8d b4 24 40 0d 
00 00 4c 89 f7 e8 62 29 2f 
2018-09-29T14:22:20.898634+02:00 debian kernel: [ 9244.960911] RSP: 
0018:ffff9d944309fd40 EFLAGS: 00010202
2018-09-29T14:22:20.898635+02:00 debian kernel: [ 9244.960912] RAX: 
0000000000000002 RBX: ffff917b584c0000 RCX: 0000000000000003
2018-09-29T14:22:20.898635+02:00 debian kernel: [ 9244.960913] RDX: 
0000000000000003 RSI: ffff917a61251900 RDI: ffff917ad3267c00
2018-09-29T14:22:20.898637+02:00 debian kernel: [ 9244.960913] RBP: 
ffff917b585e4000 R08: 0000000000024e60 R09: ffffffffc0c4590d
2018-09-29T14:22:20.898638+02:00 debian kernel: [ 9244.960914] R10: 
ffffe85ec21653c0 R11: 0000000000000001 R12: 0000000000000000
2018-09-29T14:22:20.898639+02:00 debian kernel: [ 9244.960914] R13: 
ffff917b55ec0800 R14: ffff917b58f6fd40 R15: ffffffff8b6a4fff
2018-09-29T14:22:20.898639+02:00 debian kernel: [ 9244.960915] FS:  
0000000000000000(0000) GS:ffff917b5aac0000(0000) knlGS:0000000000000000
2018-09-29T14:22:20.898640+02:00 debian kernel: [ 9244.960916] CS:  0010 DS: 
0000 ES: 0000 CR0: 0000000080050033
2018-09-29T14:22:20.898641+02:00 debian kernel: [ 9244.960917] CR2: 
0000000000000000 CR3: 000000002f80a000 CR4: 00000000001406e0
2018-09-29T14:22:20.898642+02:00 debian kernel: [ 9244.960917] Call Trace:
2018-09-29T14:22:20.898642+02:00 debian kernel: [ 9244.960946]  
amdgpu_device_ip_resume_phase2+0x58/0xb0 [amdgpu]
2018-09-29T14:22:20.898643+02:00 debian kernel: [ 9244.960971]  
amdgpu_device_resume+0xbb/0x360 [amdgpu]
2018-09-29T14:22:20.898644+02:00 debian kernel: [ 9244.960974]  ? 
pci_add_dynid+0x100/0x100
2018-09-29T14:22:20.898645+02:00 debian kernel: [ 9244.960976]  
dpm_run_callback+0x4f/0x170
2018-09-29T14:22:20.898645+02:00 debian kernel: [ 9244.960977]  
device_resume+0x93/0x180
2018-09-29T14:22:20.898646+02:00 debian kernel: [ 9244.960978]  
async_resume+0x19/0x40
2018-09-29T14:22:20.898647+02:00 debian kernel: [ 9244.960980]  
async_run_entry_fn+0x39/0x160
2018-09-29T14:22:20.898648+02:00 debian kernel: [ 9244.960981]  
process_one_work+0x191/0x370
2018-09-29T14:22:20.898648+02:00 debian kernel: [ 9244.960983]  
worker_thread+0x4f/0x3b0
2018-09-29T14:22:20.898649+02:00 debian kernel: [ 9244.960984]  
kthread+0xf8/0x130
2018-09-29T14:22:20.898650+02:00 debian kernel: [ 9244.960985]  ? 
rescuer_thread+0x340/0x340
2018-09-29T14:22:20.898650+02:00 debian kernel: [ 9244.960986]  ? 
kthread_create_worker_on_cpu+0x70/0x70
2018-09-29T14:22:20.898651+02:00 debian kernel: [ 9244.960988]  
ret_from_fork+0x22/0x40
2018-09-29T14:22:20.898652+02:00 debian kernel: [ 9244.960989] ---[ end trace 
f6a0a74fed7e32b3 ]---
2018-09-29T14:22:20.898652+02:00 debian kernel: [ 9245.088138] r8169 
0000:05:00.0 enp5s0: link down
2018-09-29T14:22:20.898653+02:00 debian kernel: [ 9245.132609] [drm] UVD 
initialized successfully.
2018-09-29T14:22:20.898653+02:00 debian kernel: [ 9245.200367] ata6: SATA link 
down (SStatus 0 SControl 300)
2018-09-29T14:22:20.898655+02:00 debian kernel: [ 9245.201529] ata1: SATA link 
down (SStatus 0 SControl 300)
2018-09-29T14:22:20.898655+02:00 debian kernel: [ 9245.297626] usb 3-5: reset 
high-speed USB device number 2 using xhci_hcd
2018-09-29T14:22:20.898656+02:00 debian kernel: [ 9245.331839] [drm] VCE 
initialized successfully.
2018-09-29T14:22:20.898657+02:00 debian kernel: [ 9245.361544] ata7: SATA link 
up 1.5 Gbps (SStatus 113 SControl 300)
2018-09-29T14:22:20.898658+02:00 debian kernel: [ 9245.378415] ata7.00: 
configured for UDMA/100
2018-09-29T14:22:20.898659+02:00 debian kernel: [ 9245.781674] usb 3-6: reset 
low-speed USB device number 3 using xhci_hcd
2018-09-29T14:22:20.898660+02:00 debian kernel: [ 9246.183935] acpi 
LNXPOWER:07: Turning OFF
2018-09-29T14:22:20.898661+02:00 debian kernel: [ 9246.183986] OOM killer 
enabled.
2018-09-29T14:22:20.898661+02:00 debian kernel: [ 9246.183987] Restarting tasks 
... done.
2018-09-29T14:22:20.898662+02:00 debian kernel: [ 9246.185543] PM: suspend exit
2018-09-29T14:22:21.834548+02:00 debian kernel: [ 9247.121404] ata2: SATA link 
up 6.0 Gbps (SStatus 133 SControl 300)
2018-09-29T14:22:21.858704+02:00 debian kernel: [ 9247.148930] ata2.00: 
configured for UDMA/133
2018-09-29T14:22:22.378653+02:00 debian kernel: [ 9247.665634] ata3: SATA link 
up 6.0 Gbps (SStatus 133 SControl 300)
2018-09-29T14:22:22.446682+02:00 debian kernel: [ 9247.736323] ata3.00: 
configured for UDMA/133
2018-09-29T14:22:22.550624+02:00 debian kernel: [ 9247.838692] Process 
accounting resumed
2018-09-29T14:22:22.638565+02:00 debian kernel: [ 9247.928941] r8169 
0000:05:00.0 enp5s0: link up
2018-09-29T14:25:39.290567+02:00 debian kernel: [ 9444.578246] PM: suspend 
entry (deep)
2018-09-29T14:25:47.891362+02:00 debian kernel: [ 9444.578250] PM: Syncing 
filesystems ... done.
2018-09-29T14:25:47.891426+02:00 debian kernel: [ 9444.740309] Freezing user 
space processes ... (elapsed 0.002 seconds) done.
2018-09-29T14:25:47.891427+02:00 debian kernel: [ 9444.743133] OOM killer 
disabled.
2018-09-29T14:25:47.891428+02:00 debian kernel: [ 9444.743135] Freezing 
remaining freezable tasks ... (elapsed 0.002 seconds) done.
2018-09-29T14:25:47.891429+02:00 debian kernel: [ 9444.745536] Suspending 
console(s) (use no_console_suspend to debug)
2018-09-29T14:25:47.891429+02:00 debian kernel: [ 9444.769995] sd 2:0:0:0: 
[sdb] Synchronizing SCSI cache
2018-09-29T14:25:47.891430+02:00 debian kernel: [ 9444.773770] sd 1:0:0:0: 
[sda] Synchronizing SCSI cache
2018-09-29T14:25:47.891431+02:00 debian kernel: [ 9444.774236] sd 1:0:0:0: 
[sda] Stopping disk
2018-09-29T14:25:47.891431+02:00 debian kernel: [ 9444.800129] sd 2:0:0:0: 
[sdb] Stopping disk
2018-09-29T14:25:47.891432+02:00 debian kernel: [ 9444.853105] amdgpu 
0000:00:01.0: 0000000083582941 unpin not necessary
2018-09-29T14:25:47.891432+02:00 debian kernel: [ 9445.501735] snd_hda_intel 
0000:00:09.2: Refused to change power state, currently in D0
2018-09-29T14:25:47.891433+02:00 debian kernel: [ 9445.561716] ACPI: Preparing 
to enter system sleep state S3
2018-09-29T14:25:47.891434+02:00 debian kernel: [ 9445.892471] PM: Saving 
platform NVS memory
2018-09-29T14:25:47.891434+02:00 debian kernel: [ 9445.892562] Disabling 
non-boot CPUs ...
2018-09-29T14:25:47.891435+02:00 debian kernel: [ 9445.906258] 
irq_migrate_all_off_this_cpu: 9 callbacks suppressed
2018-09-29T14:25:47.891435+02:00 debian kernel: [ 9445.906261] IRQ 19: no 
longer affine to CPU1
2018-09-29T14:25:47.891436+02:00 debian kernel: [ 9445.906274] IRQ 36: no 
longer affine to CPU1
2018-09-29T14:25:47.891436+02:00 debian kernel: [ 9445.906281] IRQ 37: no 
longer affine to CPU1
2018-09-29T14:25:47.891437+02:00 debian kernel: [ 9445.906290] IRQ 43: no 
longer affine to CPU1
2018-09-29T14:25:47.891438+02:00 debian kernel: [ 9445.906296] IRQ 44: no 
longer affine to CPU1
2018-09-29T14:25:47.891438+02:00 debian kernel: [ 9445.907406] smpboot: CPU 1 
is now offline
2018-09-29T14:25:47.891439+02:00 debian kernel: [ 9445.930092] IRQ 41: no 
longer affine to CPU2
2018-09-29T14:25:47.891439+02:00 debian kernel: [ 9445.930100] IRQ 42: no 
longer affine to CPU2
2018-09-29T14:25:47.891440+02:00 debian kernel: [ 9445.931132] smpboot: CPU 2 
is now offline
2018-09-29T14:25:47.891440+02:00 debian kernel: [ 9445.954006] IRQ 1: no longer 
affine to CPU3
2018-09-29T14:25:47.891441+02:00 debian kernel: [ 9445.954014] IRQ 8: no longer 
affine to CPU3
2018-09-29T14:25:47.891442+02:00 debian kernel: [ 9445.954017] IRQ 9: no longer 
affine to CPU3
2018-09-29T14:25:47.891442+02:00 debian kernel: [ 9445.955080] smpboot: CPU 3 
is now offline
2018-09-29T14:25:47.891443+02:00 debian kernel: [ 9445.956003] ACPI: Low-level 
resume complete
2018-09-29T14:25:47.891443+02:00 debian kernel: [ 9445.956037] PM: Restoring 
platform NVS memory
2018-09-29T14:25:47.891444+02:00 debian kernel: [ 9445.956123] LVT offset 0 
assigned for vector 0x400
2018-09-29T14:25:47.891444+02:00 debian kernel: [ 9445.956332] Enabling 
non-boot CPUs ...
2018-09-29T14:25:47.891445+02:00 debian kernel: [ 9445.956372] x86: Booting SMP 
configuration:
2018-09-29T14:25:47.891446+02:00 debian kernel: [ 9445.956373] smpboot: Booting 
Node 0 Processor 1 APIC 0x11
2018-09-29T14:25:47.891446+02:00 debian kernel: [ 9445.958698]  cache: parent 
cpu1 should not be sleeping
2018-09-29T14:25:47.891447+02:00 debian kernel: [ 9445.958771] microcode: CPU1: 
patch_level=0x06006118
2018-09-29T14:25:47.891447+02:00 debian kernel: [ 9445.958897] CPU1 is up
2018-09-29T14:25:47.891448+02:00 debian kernel: [ 9445.958923] smpboot: Booting 
Node 0 Processor 2 APIC 0x12
2018-09-29T14:25:47.891448+02:00 debian kernel: [ 9445.961365]  cache: parent 
cpu2 should not be sleeping
2018-09-29T14:25:47.891449+02:00 debian kernel: [ 9445.961441] microcode: CPU2: 
patch_level=0x06006118
2018-09-29T14:25:47.891450+02:00 debian kernel: [ 9445.961602] CPU2 is up
2018-09-29T14:25:47.891450+02:00 debian kernel: [ 9445.961618] smpboot: Booting 
Node 0 Processor 3 APIC 0x13
2018-09-29T14:25:47.891451+02:00 debian kernel: [ 9445.963929]  cache: parent 
cpu3 should not be sleeping
2018-09-29T14:25:47.891452+02:00 debian kernel: [ 9445.963999] microcode: CPU3: 
patch_level=0x06006118
2018-09-29T14:25:47.891452+02:00 debian kernel: [ 9445.964155] CPU3 is up
2018-09-29T14:25:47.891453+02:00 debian kernel: [ 9445.964659] ACPI: Waking up 
from system sleep state S3
2018-09-29T14:25:47.891454+02:00 debian kernel: [ 9446.071830] [drm] PCIE GART 
of 1024M enabled (table at 0x000000F400000000).
2018-09-29T14:25:47.891454+02:00 debian kernel: [ 9446.071850] usb usb3: root 
hub lost power or was reset
2018-09-29T14:25:47.891455+02:00 debian kernel: [ 9446.071853] usb usb4: root 
hub lost power or was reset
2018-09-29T14:25:47.891455+02:00 debian kernel: [ 9446.072524] sd 1:0:0:0: 
[sda] Starting disk
2018-09-29T14:25:47.891456+02:00 debian kernel: [ 9446.072549] sd 2:0:0:0: 
[sdb] Starting disk
2018-09-29T14:25:47.891457+02:00 debian kernel: [ 9446.100788] [drm] SADs count 
is: -2, don't need to read it
2018-09-29T14:25:47.891457+02:00 debian kernel: [ 9446.228930] r8169 
0000:05:00.0 enp5s0: link down
2018-09-29T14:25:47.891458+02:00 debian kernel: [ 9446.273631] [drm] UVD 
initialized successfully.
2018-09-29T14:25:47.891458+02:00 debian kernel: [ 9446.382548] ata1: SATA link 
down (SStatus 0 SControl 300)
2018-09-29T14:25:47.891459+02:00 debian kernel: [ 9446.384163] ata6: SATA link 
down (SStatus 0 SControl 300)
2018-09-29T14:25:47.891460+02:00 debian kernel: [ 9446.473028] [drm] VCE 
initialized successfully.
2018-09-29T14:25:47.891460+02:00 debian kernel: [ 9446.546160] ata7: SATA link 
up 1.5 Gbps (SStatus 113 SControl 300)
2018-09-29T14:25:47.891461+02:00 debian kernel: [ 9446.563054] ata7.00: 
configured for UDMA/100
2018-09-29T14:25:47.891461+02:00 debian kernel: [ 9446.622315] usb 3-6: reset 
low-speed USB device number 3 using xhci_hcd
2018-09-29T14:25:47.891462+02:00 debian kernel: [ 9447.186416] usb 3-5: reset 
high-speed USB device number 2 using xhci_hcd
2018-09-29T14:25:47.891463+02:00 debian kernel: [ 9447.366312] OOM killer 
enabled.
2018-09-29T14:25:47.898591+02:00 debian kernel: [ 9447.366313] Restarting tasks 
... done.
2018-09-29T14:25:47.898612+02:00 debian kernel: [ 9447.370812] PM: suspend exit
2018-09-29T14:25:47.930745+02:00 debian kernel: [ 9447.403704] Process 
accounting resumed
2018-09-29T14:25:48.394618+02:00 debian kernel: [ 9447.866164] ata2: SATA link 
up 6.0 Gbps (SStatus 133 SControl 300)
2018-09-29T14:25:48.422619+02:00 debian kernel: [ 9447.896919] ata2.00: 
configured for UDMA/133
2018-09-29T14:25:49.358800+02:00 debian kernel: [ 9448.830185] ata3: SATA link 
up 6.0 Gbps (SStatus 133 SControl 300)
2018-09-29T14:25:49.426793+02:00 debian kernel: [ 9448.900483] ata3.00: 
configured for UDMA/133
2018-09-29T14:25:49.590718+02:00 debian kernel: [ 9449.062339] r8169 
0000:05:00.0 enp5s0: link up
2018-09-29T14:27:04.894704+02:00 debian kernel: [ 9524.368002] PM: suspend 
entry (deep)
2018-09-29T14:27:18.834132+02:00 debian kernel: [ 9524.368004] PM: Syncing 
filesystems ... done.
2018-09-29T14:27:18.834197+02:00 debian kernel: [ 9524.528492] Freezing user 
space processes ... (elapsed 0.002 seconds) done.
2018-09-29T14:27:18.834198+02:00 debian kernel: [ 9524.531263] OOM killer 
disabled.
2018-09-29T14:27:18.834200+02:00 debian kernel: [ 9524.531264] Freezing 
remaining freezable tasks ... (elapsed 0.002 seconds) done.
2018-09-29T14:27:18.834201+02:00 debian kernel: [ 9524.533503] Suspending 
console(s) (use no_console_suspend to debug)
2018-09-29T14:27:18.834202+02:00 debian kernel: [ 9524.553961] sd 1:0:0:0: 
[sda] Synchronizing SCSI cache
2018-09-29T14:27:18.834202+02:00 debian kernel: [ 9524.554026] sd 2:0:0:0: 
[sdb] Synchronizing SCSI cache
2018-09-29T14:27:18.834203+02:00 debian kernel: [ 9524.556231] sd 1:0:0:0: 
[sda] Stopping disk
2018-09-29T14:27:18.834204+02:00 debian kernel: [ 9524.610986] amdgpu 
0000:00:01.0: 0000000083582941 unpin not necessary
2018-09-29T14:27:18.834205+02:00 debian kernel: [ 9524.626555] sd 2:0:0:0: 
[sdb] Stopping disk
2018-09-29T14:27:18.834205+02:00 debian kernel: [ 9525.118305] ACPI: Preparing 
to enter system sleep state S3
2018-09-29T14:27:18.834206+02:00 debian kernel: [ 9525.444738] PM: Saving 
platform NVS memory
2018-09-29T14:27:18.834207+02:00 debian kernel: [ 9525.444828] Disabling 
non-boot CPUs ...
2018-09-29T14:27:18.834208+02:00 debian kernel: [ 9525.458723] 
irq_migrate_all_off_this_cpu: 8 callbacks suppressed
2018-09-29T14:27:18.834209+02:00 debian kernel: [ 9525.458724] IRQ 19: no 
longer affine to CPU1
2018-09-29T14:27:18.834209+02:00 debian kernel: [ 9525.458736] IRQ 36: no 
longer affine to CPU1
2018-09-29T14:27:18.834210+02:00 debian kernel: [ 9525.458740] IRQ 37: no 
longer affine to CPU1
2018-09-29T14:27:18.834211+02:00 debian kernel: [ 9525.458748] IRQ 43: no 
longer affine to CPU1
2018-09-29T14:27:18.834212+02:00 debian kernel: [ 9525.458753] IRQ 44: no 
longer affine to CPU1
2018-09-29T14:27:18.834212+02:00 debian kernel: [ 9525.459842] smpboot: CPU 1 
is now offline
2018-09-29T14:27:18.834213+02:00 debian kernel: [ 9525.482879] IRQ 42: no 
longer affine to CPU2
2018-09-29T14:27:18.834214+02:00 debian kernel: [ 9525.483926] smpboot: CPU 2 
is now offline
2018-09-29T14:27:18.834214+02:00 debian kernel: [ 9525.510682] IRQ 1: no longer 
affine to CPU3
2018-09-29T14:27:18.834215+02:00 debian kernel: [ 9525.510692] IRQ 8: no longer 
affine to CPU3
2018-09-29T14:27:18.834215+02:00 debian kernel: [ 9525.510697] IRQ 9: no longer 
affine to CPU3
2018-09-29T14:27:18.834216+02:00 debian kernel: [ 9525.510709] IRQ 26: no 
longer affine to CPU3
2018-09-29T14:27:18.834217+02:00 debian kernel: [ 9525.511772] smpboot: CPU 3 
is now offline
2018-09-29T14:27:18.834217+02:00 debian kernel: [ 9525.512590] ACPI: Low-level 
resume complete
2018-09-29T14:27:18.834218+02:00 debian kernel: [ 9525.512624] PM: Restoring 
platform NVS memory
2018-09-29T14:27:18.834219+02:00 debian kernel: [ 9525.512705] LVT offset 0 
assigned for vector 0x400
2018-09-29T14:27:18.834219+02:00 debian kernel: [ 9525.512923] Enabling 
non-boot CPUs ...
2018-09-29T14:27:18.834220+02:00 debian kernel: [ 9525.512963] x86: Booting SMP 
configuration:
2018-09-29T14:27:18.834221+02:00 debian kernel: [ 9525.512964] smpboot: Booting 
Node 0 Processor 1 APIC 0x11
2018-09-29T14:27:18.834221+02:00 debian kernel: [ 9525.515275]  cache: parent 
cpu1 should not be sleeping
2018-09-29T14:27:18.834222+02:00 debian kernel: [ 9525.515347] microcode: CPU1: 
patch_level=0x06006118
2018-09-29T14:27:18.834222+02:00 debian kernel: [ 9525.515471] CPU1 is up
2018-09-29T14:27:18.834223+02:00 debian kernel: [ 9525.515495] smpboot: Booting 
Node 0 Processor 2 APIC 0x12
2018-09-29T14:27:18.834224+02:00 debian kernel: [ 9525.517945]  cache: parent 
cpu2 should not be sleeping
2018-09-29T14:27:18.834224+02:00 debian kernel: [ 9525.518022] microcode: CPU2: 
patch_level=0x06006118
2018-09-29T14:27:18.834225+02:00 debian kernel: [ 9525.518179] CPU2 is up
2018-09-29T14:27:18.834226+02:00 debian kernel: [ 9525.518196] smpboot: Booting 
Node 0 Processor 3 APIC 0x13
2018-09-29T14:27:18.834226+02:00 debian kernel: [ 9525.520505]  cache: parent 
cpu3 should not be sleeping
2018-09-29T14:27:18.834227+02:00 debian kernel: [ 9525.520581] microcode: CPU3: 
patch_level=0x06006118
2018-09-29T14:27:18.834227+02:00 debian kernel: [ 9525.520735] CPU3 is up
2018-09-29T14:27:18.834228+02:00 debian kernel: [ 9525.521241] ACPI: Waking up 
from system sleep state S3
2018-09-29T14:27:18.834229+02:00 debian kernel: [ 9525.627673] usb usb3: root 
hub lost power or was reset
2018-09-29T14:27:18.834229+02:00 debian kernel: [ 9525.627676] usb usb4: root 
hub lost power or was reset
2018-09-29T14:27:18.834230+02:00 debian kernel: [ 9525.628426] [drm] PCIE GART 
of 1024M enabled (table at 0x000000F400000000).
2018-09-29T14:27:18.834231+02:00 debian kernel: [ 9525.629201] sd 1:0:0:0: 
[sda] Starting disk
2018-09-29T14:27:18.834231+02:00 debian kernel: [ 9525.629223] sd 2:0:0:0: 
[sdb] Starting disk
2018-09-29T14:27:18.834232+02:00 debian kernel: [ 9525.657302] [drm] SADs count 
is: -2, don't need to read it
2018-09-29T14:27:18.834232+02:00 debian kernel: [ 9525.785757] r8169 
0000:05:00.0 enp5s0: link down
2018-09-29T14:27:18.834233+02:00 debian kernel: [ 9525.830618] [drm] UVD 
initialized successfully.
2018-09-29T14:27:18.834234+02:00 debian kernel: [ 9525.938669] ata1: SATA link 
down (SStatus 0 SControl 300)
2018-09-29T14:27:18.834234+02:00 debian kernel: [ 9525.940870] ata6: SATA link 
down (SStatus 0 SControl 300)
2018-09-29T14:27:18.834235+02:00 debian kernel: [ 9526.029985] [drm] VCE 
initialized successfully.
2018-09-29T14:27:18.834236+02:00 debian kernel: [ 9526.042872] usb 3-5: reset 
high-speed USB device number 2 using xhci_hcd
2018-09-29T14:27:18.834237+02:00 debian kernel: [ 9526.102731] ata7: SATA link 
up 1.5 Gbps (SStatus 113 SControl 300)
2018-09-29T14:27:18.834237+02:00 debian kernel: [ 9526.120137] ata7.00: 
configured for UDMA/100
2018-09-29T14:27:18.834238+02:00 debian kernel: [ 9526.462859] usb 3-6: reset 
low-speed USB device number 3 using xhci_hcd
2018-09-29T14:27:18.834239+02:00 debian kernel: [ 9526.865244] OOM killer 
enabled.
2018-09-29T14:27:18.838565+02:00 debian kernel: [ 9526.865245] Restarting tasks 
... done.
2018-09-29T14:27:18.838571+02:00 debian kernel: [ 9526.869575] PM: suspend exit
2018-09-29T14:27:18.870708+02:00 debian kernel: [ 9526.901504] Process 
accounting resumed
2018-09-29T14:27:20.422755+02:00 debian kernel: [ 9528.450779] ata3: SATA link 
up 6.0 Gbps (SStatus 133 SControl 300)
2018-09-29T14:27:20.498773+02:00 debian kernel: [ 9528.527894] ata3.00: 
configured for UDMA/133
2018-09-29T14:27:20.534745+02:00 debian kernel: [ 9528.562769] ata2: SATA link 
up 6.0 Gbps (SStatus 133 SControl 300)
2018-09-29T14:27:20.563594+02:00 debian kernel: [ 9528.595470] ata2.00: 
configured for UDMA/133
2018-09-29T14:27:20.586591+02:00 debian kernel: [ 9528.617200] r8169 
0000:05:00.0 enp5s0: link up
2018-09-29T14:29:25.870738+02:00 debian kernel: [ 9653.901323] PM: suspend 
entry (deep)
2018-09-29T14:29:34.822341+02:00 debian kernel: [ 9653.901325] PM: Syncing 
filesystems ... done.
2018-09-29T14:29:34.822407+02:00 debian kernel: [ 9654.075313] Freezing user 
space processes ... (elapsed 0.002 seconds) done.
2018-09-29T14:29:34.822409+02:00 debian kernel: [ 9654.078070] OOM killer 
disabled.
2018-09-29T14:29:34.822410+02:00 debian kernel: [ 9654.078071] Freezing 
remaining freezable tasks ... (elapsed 0.002 seconds) done.
2018-09-29T14:29:34.822411+02:00 debian kernel: [ 9654.080348] Suspending 
console(s) (use no_console_suspend to debug)
2018-09-29T14:29:34.822412+02:00 debian kernel: [ 9654.103420] sd 1:0:0:0: 
[sda] Synchronizing SCSI cache
2018-09-29T14:29:34.822413+02:00 debian kernel: [ 9654.103944] sd 1:0:0:0: 
[sda] Stopping disk
2018-09-29T14:29:34.822413+02:00 debian kernel: [ 9654.110945] sd 2:0:0:0: 
[sdb] Synchronizing SCSI cache
2018-09-29T14:29:34.822414+02:00 debian kernel: [ 9654.134520] amdgpu 
0000:00:01.0: 0000000083582941 unpin not necessary
2018-09-29T14:29:34.822415+02:00 debian kernel: [ 9654.136111] sd 2:0:0:0: 
[sdb] Stopping disk
2018-09-29T14:29:34.822416+02:00 debian kernel: [ 9654.866844] snd_hda_intel 
0000:00:09.2: Refused to change power state, currently in D0
2018-09-29T14:29:34.822416+02:00 debian kernel: [ 9654.922905] ACPI: Preparing 
to enter system sleep state S3
2018-09-29T14:29:34.822417+02:00 debian kernel: [ 9655.237734] PM: Saving 
platform NVS memory
2018-09-29T14:29:34.822418+02:00 debian kernel: [ 9655.237824] Disabling 
non-boot CPUs ...
2018-09-29T14:29:34.825206+02:00 debian kernel: [ 9655.251432] 
irq_migrate_all_off_this_cpu: 8 callbacks suppressed
2018-09-29T14:29:34.825215+02:00 debian kernel: [ 9655.251434] IRQ 19: no 
longer affine to CPU1
2018-09-29T14:29:34.825217+02:00 debian kernel: [ 9655.251447] IRQ 36: no 
longer affine to CPU1
2018-09-29T14:29:34.825218+02:00 debian kernel: [ 9655.251455] IRQ 37: no 
longer affine to CPU1
2018-09-29T14:29:34.825219+02:00 debian kernel: [ 9655.251463] IRQ 41: no 
longer affine to CPU1
2018-09-29T14:29:34.825221+02:00 debian kernel: [ 9655.251473] IRQ 43: no 
longer affine to CPU1
2018-09-29T14:29:34.825222+02:00 debian kernel: [ 9655.251480] IRQ 44: no 
longer affine to CPU1
2018-09-29T14:29:34.825222+02:00 debian kernel: [ 9655.252590] smpboot: CPU 1 
is now offline
2018-09-29T14:29:34.825223+02:00 debian kernel: [ 9655.271289] IRQ 42: no 
longer affine to CPU2
2018-09-29T14:29:34.825224+02:00 debian kernel: [ 9655.272325] smpboot: CPU 2 
is now offline
2018-09-29T14:29:34.825225+02:00 debian kernel: [ 9655.299226] IRQ 1: no longer 
affine to CPU3
2018-09-29T14:29:34.825226+02:00 debian kernel: [ 9655.299235] IRQ 8: no longer 
affine to CPU3
2018-09-29T14:29:34.825227+02:00 debian kernel: [ 9655.299239] IRQ 9: no longer 
affine to CPU3
2018-09-29T14:29:34.825228+02:00 debian kernel: [ 9655.300305] smpboot: CPU 3 
is now offline
2018-09-29T14:29:34.825229+02:00 debian kernel: [ 9655.301248] ACPI: Low-level 
resume complete
2018-09-29T14:29:34.825230+02:00 debian kernel: [ 9655.301283] PM: Restoring 
platform NVS memory
2018-09-29T14:29:34.825231+02:00 debian kernel: [ 9655.301367] LVT offset 0 
assigned for vector 0x400
2018-09-29T14:29:34.825231+02:00 debian kernel: [ 9655.301586] Enabling 
non-boot CPUs ...
2018-09-29T14:29:34.825232+02:00 debian kernel: [ 9655.301626] x86: Booting SMP 
configuration:
2018-09-29T14:29:34.825233+02:00 debian kernel: [ 9655.301627] smpboot: Booting 
Node 0 Processor 1 APIC 0x11
2018-09-29T14:29:34.825234+02:00 debian kernel: [ 9655.303951]  cache: parent 
cpu1 should not be sleeping
2018-09-29T14:29:34.825235+02:00 debian kernel: [ 9655.304023] microcode: CPU1: 
patch_level=0x06006118
2018-09-29T14:29:34.825236+02:00 debian kernel: [ 9655.304150] CPU1 is up
2018-09-29T14:29:34.825237+02:00 debian kernel: [ 9655.304174] smpboot: Booting 
Node 0 Processor 2 APIC 0x12
2018-09-29T14:29:34.825238+02:00 debian kernel: [ 9655.306626]  cache: parent 
cpu2 should not be sleeping
2018-09-29T14:29:34.825239+02:00 debian kernel: [ 9655.306703] microcode: CPU2: 
patch_level=0x06006118
2018-09-29T14:29:34.825239+02:00 debian kernel: [ 9655.306860] CPU2 is up
2018-09-29T14:29:34.825240+02:00 debian kernel: [ 9655.306876] smpboot: Booting 
Node 0 Processor 3 APIC 0x13
2018-09-29T14:29:34.825241+02:00 debian kernel: [ 9655.309186]  cache: parent 
cpu3 should not be sleeping
2018-09-29T14:29:34.825242+02:00 debian kernel: [ 9655.309256] microcode: CPU3: 
patch_level=0x06006118
2018-09-29T14:29:34.825242+02:00 debian kernel: [ 9655.309417] CPU3 is up
2018-09-29T14:29:34.825243+02:00 debian kernel: [ 9655.309928] ACPI: Waking up 
from system sleep state S3
2018-09-29T14:29:34.825244+02:00 debian kernel: [ 9655.417012] [drm] PCIE GART 
of 1024M enabled (table at 0x000000F400000000).
2018-09-29T14:29:34.825245+02:00 debian kernel: [ 9655.417032] usb usb3: root 
hub lost power or was reset
2018-09-29T14:29:34.825246+02:00 debian kernel: [ 9655.417035] usb usb4: root 
hub lost power or was reset
2018-09-29T14:29:34.825292+02:00 debian kernel: [ 9655.417713] sd 1:0:0:0: 
[sda] Starting disk
2018-09-29T14:29:34.825294+02:00 debian kernel: [ 9655.417738] sd 2:0:0:0: 
[sdb] Starting disk
2018-09-29T14:29:34.825295+02:00 debian kernel: [ 9655.445945] [drm] SADs count 
is: -2, don't need to read it
2018-09-29T14:29:34.825296+02:00 debian kernel: [ 9655.574294] r8169 
0000:05:00.0 enp5s0: link down
2018-09-29T14:29:34.825297+02:00 debian kernel: [ 9655.619374] [drm] UVD 
initialized successfully.
2018-09-29T14:29:34.825298+02:00 debian kernel: [ 9655.729921] ata6: SATA link 
down (SStatus 0 SControl 300)
2018-09-29T14:29:34.825299+02:00 debian kernel: [ 9655.732127] ata1: SATA link 
down (SStatus 0 SControl 300)
2018-09-29T14:29:34.825300+02:00 debian kernel: [ 9655.818679] [drm] VCE 
initialized successfully.
2018-09-29T14:29:34.825300+02:00 debian kernel: [ 9655.891361] ata7: SATA link 
up 1.5 Gbps (SStatus 113 SControl 300)
2018-09-29T14:29:34.825301+02:00 debian kernel: [ 9655.908676] ata7.00: 
configured for UDMA/100
2018-09-29T14:29:34.825302+02:00 debian kernel: [ 9655.967503] usb 3-6: reset 
low-speed USB device number 3 using xhci_hcd
2018-09-29T14:29:34.825303+02:00 debian kernel: [ 9656.463597] usb 3-5: reset 
high-speed USB device number 2 using xhci_hcd
2018-09-29T14:29:34.825304+02:00 debian kernel: [ 9656.642604] OOM killer 
enabled.
2018-09-29T14:29:34.834525+02:00 debian kernel: [ 9656.642605] Restarting tasks 
... done.
2018-09-29T14:29:34.834543+02:00 debian kernel: [ 9656.651338] PM: suspend exit
2018-09-29T14:29:35.466759+02:00 debian kernel: [ 9657.283200] ata2: SATA link 
up 6.0 Gbps (SStatus 133 SControl 300)
2018-09-29T14:29:35.490546+02:00 debian kernel: [ 9657.310245] ata2.00: 
configured for UDMA/133
2018-09-29T14:29:36.374520+02:00 debian kernel: [ 9658.191345] ata3: SATA link 
up 6.0 Gbps (SStatus 133 SControl 300)
2018-09-29T14:29:36.450552+02:00 debian kernel: [ 9658.267691] ata3.00: 
configured for UDMA/133
2018-09-29T14:29:36.530537+02:00 debian kernel: [ 9658.347482] Process 
accounting resumed
2018-09-29T14:29:36.650527+02:00 debian kernel: [ 9658.467765] r8169 
0000:05:00.0 enp5s0: link up
2018-09-29T14:44:12.850615+02:00 debian kernel: [10534.669978] amdgpu: 
[powerplay] pp_dpm_get_fan_speed_percent was not implemented.
2018-09-29T14:44:16.826624+02:00 debian kernel: [10538.646466] amdgpu: 
[powerplay] pp_dpm_get_fan_control_mode was not implemented.
2018-09-29T15:19:11.122518+02:00 debian kernel: [12632.939518] [drm] SADs count 
is: -2, don't need to read it
2018-09-29T15:39:20.106519+02:00 debian kernel: [13841.927363] [drm] SADs count 
is: -2, don't need to read it
2018-09-29T17:12:29.058514+02:00 debian kernel: [19430.878035] [drm] SADs count 
is: -2, don't need to read it

Reply via email to