Package: xcalib Version: 0.8.dfsg1-2+b2 Severity: normal "xcalib -a -i" should invert the colors, but instead changes everything into some colors (white, black, cyan, blue, magenta, etc), like if every component was only 0 or 255 for 8 bit channels. I fear it could be related to amdgpu driver or Polaris chip videocard as inversion worked time ago, before changing the card.
Sadly previous card, Cypress with radeon driver, is not avaliable anymore, so unable to confirm if xcalib is doing the wrong calls to generic code that changed since or driver / card is the culprit. redshift changes the colors with the new card to something apparently correct. "xcalib -a -p" prints tables that look correct, 1024 lines ffff to 0 or 0 to ffff. In the inverted case, it also prints lots of "Warning - {red,green,blue} gamma table not monotonic" messages (they are, but decreasing, xcalib git changed it, still no good if you run "-a -i" then "-a -p" instead of "-a -i -p"). "xrandr --prop | grep -i gamma" reports LUT sizes to be 4096, not 1024, making things more confusing, or maybe a clue of where the problem resides. Please reassign if you can test the culprit is the driver/card. Thanks, GSR -- System Information: Debian Release: buster/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 4.17.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) Versions of packages xcalib depends on: ii libc6 2.27-8 ii libx11-6 2:1.6.4-3 ii libxext6 2:1.3.3-1+b2 ii libxxf86vm1 1:1.1.4-1+b2 xcalib recommends no packages. Versions of packages xcalib suggests: pn icc-profiles <none> -- no debconf information