Package: python-fluids Version: 0.1.72-2 Severity: normal Control: affects -1 python3-scipy
python-fluids fails to build from source against scipy 1.2.0 (available in experimental). Errors are in test_PSDLognormal_ds_discrete and test_PSDLognormal_dn Build log attached. -- System Information: Debian Release: buster/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.19.0-2-amd64 (SMP w/4 CPU cores) Kernel taint flags: TAINT_WARN, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8), LANGUAGE=en_AU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages python-fluids depends on: ii python 2.7.15-4 ii python-fuzzywuzzy 0.17.0-1 ii python-ipython 5.8.0-1 ii python-matplotlib 2.2.3-5 ii python-pandas 0.23.3-1 ii python-pint 0.9-1 ii python-scipy 1.2.0-1 ii python-sympy 1.3-2 python-fluids recommends no packages. Versions of packages python-fluids suggests: ii python-fluids-doc 0.1.72-2 -- no debconf information
dpkg-buildpackage: info: source package python-fluids dpkg-buildpackage: info: source version 0.1.72-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Kurt Kremitzki <[email protected]> dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean --with python2,python3,sphinxdoc --buildsystem=pybuild --test-pytest dh_auto_clean -O--buildsystem=pybuild -O--test-pytest I: pybuild base:217: python2.7 setup.py clean /usr/lib/python2.7/distutils/dist.py:267: UserWarning: Unknown distribution option: 'extras_require' warnings.warn(msg) /usr/lib/python2.7/distutils/dist.py:267: UserWarning: Unknown distribution option: 'install_requires' warnings.warn(msg) running clean removing '/home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build' (and everything under it) 'build/bdist.linux-arm64' does not exist -- can't clean it 'build/scripts-2.7' does not exist -- can't clean it I: pybuild base:217: python3.7 setup.py clean running clean removing '/home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build' (and everything under it) /usr/lib/python3.7/distutils/dist.py:274: UserWarning: Unknown distribution option: 'install_requires' warnings.warn(msg) /usr/lib/python3.7/distutils/dist.py:274: UserWarning: Unknown distribution option: 'extras_require' warnings.warn(msg) 'build/bdist.linux-arm64' does not exist -- can't clean it 'build/scripts-3.7' does not exist -- can't clean it dh_autoreconf_clean -O--buildsystem=pybuild -O--test-pytest dh_clean -O--buildsystem=pybuild -O--test-pytest dpkg-source -b . dpkg-source: info: using source format '3.0 (quilt)' dpkg-source: info: building python-fluids using existing ./python-fluids_0.1.72.orig.tar.gz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: building python-fluids in python-fluids_0.1.72-2.debian.tar.xz dpkg-source: info: building python-fluids in python-fluids_0.1.72-2.dsc debian/rules build dh build --with python2,python3,sphinxdoc --buildsystem=pybuild --test-pytest dh_update_autotools_config -O--buildsystem=pybuild -O--test-pytest dh_autoreconf -O--buildsystem=pybuild -O--test-pytest dh_auto_configure -O--buildsystem=pybuild -O--test-pytest I: pybuild base:217: python2.7 setup.py config /usr/lib/python2.7/distutils/dist.py:267: UserWarning: Unknown distribution option: 'extras_require' warnings.warn(msg) /usr/lib/python2.7/distutils/dist.py:267: UserWarning: Unknown distribution option: 'install_requires' warnings.warn(msg) running config I: pybuild base:217: python3.7 setup.py config running config /usr/lib/python3.7/distutils/dist.py:274: UserWarning: Unknown distribution option: 'install_requires' warnings.warn(msg) /usr/lib/python3.7/distutils/dist.py:274: UserWarning: Unknown distribution option: 'extras_require' warnings.warn(msg) debian/rules override_dh_auto_build make[1]: Entering directory '/home/dparsons/scipy/python-fluids-0.1.72' dh_auto_build I: pybuild base:217: /usr/bin/python setup.py build /usr/lib/python2.7/distutils/dist.py:267: UserWarning: Unknown distribution option: 'extras_require' warnings.warn(msg) /usr/lib/python2.7/distutils/dist.py:267: UserWarning: Unknown distribution option: 'install_requires' warnings.warn(msg) running build running build_py creating /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/drag.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/open_flow.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/saltation.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/filters.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/vectorized.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/piping.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/packed_tower.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/units.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/packed_bed.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/design_climate.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/atmosphere.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/safety_valve.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/compressible.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/separator.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/friction.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/two_phase_voidage.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/particle_size_distribution.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/two_phase.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/control_valve.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/core.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/__init__.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/mixing.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/pump.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/fittings.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/geometry.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids copying fluids/flow_meter.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids creating /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/data copying fluids/data/ASTM E11 sieves.csv -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/data copying fluids/data/isd-history-cleaned.tsv -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/data copying fluids/data/residential power.csv -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/data copying fluids/data/ISO 3310-1 sieves.csv -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/data copying fluids/data/3 phase power.csv -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/data creating /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/nrlmsise00 copying fluids/nrlmsise00/README -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/nrlmsise00 copying fluids/nrlmsise00/nrlmsise_00_header.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/nrlmsise00 copying fluids/nrlmsise00/LICENSE -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/nrlmsise00 copying fluids/nrlmsise00/nrlmsise_00_data.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/nrlmsise00 copying fluids/nrlmsise00/__init__.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/nrlmsise00 copying fluids/nrlmsise00/nrlmsise_00.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/nrlmsise00 creating /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/optional copying fluids/optional/gd2qd.dat -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/optional copying fluids/optional/hwm93.for -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/optional copying fluids/optional/hwm14.pyf -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/optional copying fluids/optional/dwm07b104i.dat -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/optional copying fluids/optional/hwm14.f90 -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/optional copying fluids/optional/hwm123114.bin -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/optional copying fluids/optional/pychebfun.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/optional copying fluids/optional/__init__.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/optional copying fluids/optional/hwm93.pyf -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/optional I: pybuild base:217: /usr/bin/python3 setup.py build running build running build_py creating /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/drag.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/open_flow.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/saltation.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/filters.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/vectorized.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/piping.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/packed_tower.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/units.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/packed_bed.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/design_climate.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/atmosphere.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/safety_valve.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/compressible.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/separator.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/friction.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/two_phase_voidage.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/particle_size_distribution.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/two_phase.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/control_valve.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/core.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/__init__.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/mixing.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/pump.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/fittings.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/geometry.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids copying fluids/flow_meter.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids creating /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/data copying fluids/data/ASTM E11 sieves.csv -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/data copying fluids/data/isd-history-cleaned.tsv -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/data copying fluids/data/residential power.csv -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/data copying fluids/data/ISO 3310-1 sieves.csv -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/data copying fluids/data/3 phase power.csv -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/data creating /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/nrlmsise00 copying fluids/nrlmsise00/README -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/nrlmsise00 copying fluids/nrlmsise00/nrlmsise_00_header.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/nrlmsise00 copying fluids/nrlmsise00/LICENSE -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/nrlmsise00 copying fluids/nrlmsise00/nrlmsise_00_data.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/nrlmsise00 copying fluids/nrlmsise00/__init__.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/nrlmsise00 copying fluids/nrlmsise00/nrlmsise_00.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/nrlmsise00 creating /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/optional copying fluids/optional/gd2qd.dat -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/optional copying fluids/optional/hwm93.for -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/optional copying fluids/optional/hwm14.pyf -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/optional copying fluids/optional/dwm07b104i.dat -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/optional copying fluids/optional/hwm14.f90 -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/optional copying fluids/optional/hwm123114.bin -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/optional copying fluids/optional/pychebfun.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/optional copying fluids/optional/__init__.py -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/optional copying fluids/optional/hwm93.pyf -> /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython3_3.7_fluids/build/fluids/optional /usr/lib/python3.7/distutils/dist.py:274: UserWarning: Unknown distribution option: 'install_requires' warnings.warn(msg) /usr/lib/python3.7/distutils/dist.py:274: UserWarning: Unknown distribution option: 'extras_require' warnings.warn(msg) PYTHONPATH=. python3 -m sphinx -N -bhtml docs/ build/html # HTML generator Running Sphinx v1.8.3 making output directory... [autosummary] generating autosummary for: Examples/Crane TP 410 Solved Problems/7.1 Smooth Pipe (Plastic).ipynb, Examples/Crane TP 410 Solved Problems/7.10 Piping Systems - Steam.ipynb, Examples/Crane TP 410 Solved Problems/7.11 Flat heating Coils - Water.ipynb, Examples/Crane TP 410 Solved Problems/7.13 Flow given in English Units - Oil.ipynb, Examples/Crane TP 410 Solved Problems/7.14 Bernoulli's Theorem-Water.ipynb, Examples/Crane TP 410 Solved Problems/7.2 L, L over D and K from Kv for Conventional Type Valves.ipynb, Examples/Crane TP 410 Solved Problems/7.29 Orifice Flow Rate Calculation.ipynb, Examples/Crane TP 410 Solved Problems/7.3 L, L over D, K, and Kv for Conventional Type Valves.ipynb, Examples/Crane TP 410 Solved Problems/7.4 Venturi Type Valves.ipynb, Examples/Crane TP 410 Solved Problems/7.5 Lift Check Valves.ipynb, ..., fluids.safety_valve.rst, fluids.saltation.rst, fluids.separator.rst, fluids.two_phase.rst, fluids.two_phase_voidage.rst, fluids.units.rst, fluids.vectorized.rst, index.rst, modules.rst, tutorial.rst building [mo]: targets for 0 po files that are out of date building [html]: targets for 42 source files that are out of date updating environment: 42 added, 0 changed, 0 removed reading sources... [ 2%] Examples/Crane TP 410 Solved Problems/7.1 Smooth Pipe (Plastic) reading sources... [ 4%] Examples/Crane TP 410 Solved Problems/7.10 Piping Systems - Steam reading sources... [ 7%] Examples/Crane TP 410 Solved Problems/7.11 Flat heating Coils - Water reading sources... [ 9%] Examples/Crane TP 410 Solved Problems/7.13 Flow given in English Units - Oil reading sources... [ 11%] Examples/Crane TP 410 Solved Problems/7.14 Bernoulli's Theorem-Water reading sources... [ 14%] Examples/Crane TP 410 Solved Problems/7.2 L, L over D and K from Kv for Conventional Type Valves reading sources... [ 16%] Examples/Crane TP 410 Solved Problems/7.29 Orifice Flow Rate Calculation reading sources... [ 19%] Examples/Crane TP 410 Solved Problems/7.3 L, L over D, K, and Kv for Conventional Type Valves reading sources... [ 21%] Examples/Crane TP 410 Solved Problems/7.4 Venturi Type Valves reading sources... [ 23%] Examples/Crane TP 410 Solved Problems/7.5 Lift Check Valves /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() reading sources... [ 26%] Examples/Crane TP 410 Solved Problems/7.6 Reduced Port Ball Valve reading sources... [ 28%] Examples/Crane TP 410 Solved Problems/7.7 Laminar flow in Valves, Fittings, and Pipe - System from Example 7.6 reading sources... [ 30%] Examples/Crane TP 410 Solved Problems/7.8 Laminar flow in Valves, Fittings, and Pipe - SAE oil through a pipe and globe valve reading sources... [ 33%] examples reading sources... [ 35%] fluids reading sources... [ 38%] fluids.atmosphere reading sources... [ 40%] fluids.compressible reading sources... [ 42%] fluids.control_valve reading sources... [ 45%] fluids.core reading sources... [ 47%] fluids.drag reading sources... [ 50%] fluids.filters reading sources... [ 52%] fluids.fittings reading sources... [ 54%] fluids.flow_meter reading sources... [ 57%] fluids.friction reading sources... [ 59%] fluids.geometry reading sources... [ 61%] fluids.mixing reading sources... [ 64%] fluids.open_flow reading sources... [ 66%] fluids.packed_bed reading sources... [ 69%] fluids.packed_tower reading sources... [ 71%] fluids.particle_size_distribution reading sources... [ 73%] fluids.piping reading sources... [ 76%] fluids.pump reading sources... [ 78%] fluids.safety_valve reading sources... [ 80%] fluids.saltation reading sources... [ 83%] fluids.separator reading sources... [ 85%] fluids.two_phase reading sources... [ 88%] fluids.two_phase_voidage reading sources... [ 90%] fluids.units reading sources... [ 92%] fluids.vectorized reading sources... [ 95%] index reading sources... [ 97%] modules reading sources... [100%] tutorial /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /usr/lib/python3/dist-packages/nbsphinx.py:1174: RuntimeWarning: You are using an unsupported version of pandoc (2.2.1). Your version must be at least (1.12.1) but less than (2.0.0). Refer to http://pandoc.org/installing.html. Continuing with doubts... nbconvert.utils.pandoc.check_pandoc_version() /home/dparsons/scipy/python-fluids-0.1.72/fluids/compressible.py:docstring of fluids.compressible.isentropic_T_rise_compression:51: WARNING: Inline interpreted text or phrase reference start-string without end-string. /home/dparsons/scipy/python-fluids-0.1.72/fluids/core.py:docstring of fluids.core.Stanton:48: WARNING: Duplicate explicit target name: "r114". /home/dparsons/scipy/python-fluids-0.1.72/fluids/core.py:docstring of fluids.core.Stanton:48: WARNING: duplicate citation R114, other instance in /home/dparsons/scipy/python-fluids-0.1.72/docs/fluids.core.rst /home/dparsons/scipy/python-fluids-0.1.72/fluids/packed_bed.py:docstring of fluids.packed_bed.Brauer:67: WARNING: Duplicate explicit target name: "r495". /home/dparsons/scipy/python-fluids-0.1.72/fluids/packed_bed.py:docstring of fluids.packed_bed.Harrison_Brunner_Hecker:68: WARNING: Unexpected indentation. /home/dparsons/scipy/python-fluids-0.1.72/fluids/packed_bed.py:docstring of fluids.packed_bed.Brauer:67: WARNING: duplicate citation R495, other instance in /home/dparsons/scipy/python-fluids-0.1.72/docs/fluids.packed_bed.rst /home/dparsons/scipy/python-fluids-0.1.72/fluids/particle_size_distribution.py:docstring of fluids.particle_size_distribution.ParticleSizeDistribution.vssa:7: WARNING: Explicit markup ends without a blank line; unexpected unindent. /home/dparsons/scipy/python-fluids-0.1.72/fluids/particle_size_distribution.py:docstring of fluids.particle_size_distribution.ParticleSizeDistribution.vssa:8: WARNING: Unexpected section title. Returns ------- /home/dparsons/scipy/python-fluids-0.1.72/fluids/two_phase_voidage.py:docstring of fluids.two_phase_voidage.Lin_Kwok:2: WARNING: Unknown target name: "3". /home/dparsons/scipy/python-fluids-0.1.72/docs/tutorial.rst:561: WARNING: Inline interpreted text or phrase reference start-string without end-string. looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done writing output... [ 2%] Examples/Crane TP 410 Solved Problems/7.1 Smooth Pipe (Plastic) writing output... [ 4%] Examples/Crane TP 410 Solved Problems/7.10 Piping Systems - Steam writing output... [ 7%] Examples/Crane TP 410 Solved Problems/7.11 Flat heating Coils - Water writing output... [ 9%] Examples/Crane TP 410 Solved Problems/7.13 Flow given in English Units - Oil writing output... [ 11%] Examples/Crane TP 410 Solved Problems/7.14 Bernoulli's Theorem-Water writing output... [ 14%] Examples/Crane TP 410 Solved Problems/7.2 L, L over D and K from Kv for Conventional Type Valves writing output... [ 16%] Examples/Crane TP 410 Solved Problems/7.29 Orifice Flow Rate Calculation writing output... [ 19%] Examples/Crane TP 410 Solved Problems/7.3 L, L over D, K, and Kv for Conventional Type Valves writing output... [ 21%] Examples/Crane TP 410 Solved Problems/7.4 Venturi Type Valves writing output... [ 23%] Examples/Crane TP 410 Solved Problems/7.5 Lift Check Valves writing output... [ 26%] Examples/Crane TP 410 Solved Problems/7.6 Reduced Port Ball Valve writing output... [ 28%] Examples/Crane TP 410 Solved Problems/7.7 Laminar flow in Valves, Fittings, and Pipe - System from Example 7.6 writing output... [ 30%] Examples/Crane TP 410 Solved Problems/7.8 Laminar flow in Valves, Fittings, and Pipe - SAE oil through a pipe and globe valve writing output... [ 33%] examples writing output... [ 35%] fluids writing output... [ 38%] fluids.atmosphere writing output... [ 40%] fluids.compressible writing output... [ 42%] fluids.control_valve writing output... [ 45%] fluids.core writing output... [ 47%] fluids.drag writing output... [ 50%] fluids.filters writing output... [ 52%] fluids.fittings writing output... [ 54%] fluids.flow_meter writing output... [ 57%] fluids.friction writing output... [ 59%] fluids.geometry writing output... [ 61%] fluids.mixing writing output... [ 64%] fluids.open_flow writing output... [ 66%] fluids.packed_bed writing output... [ 69%] fluids.packed_tower writing output... [ 71%] fluids.particle_size_distribution writing output... [ 73%] fluids.piping writing output... [ 76%] fluids.pump writing output... [ 78%] fluids.safety_valve writing output... [ 80%] fluids.saltation writing output... [ 83%] fluids.separator writing output... [ 85%] fluids.two_phase writing output... [ 88%] fluids.two_phase_voidage writing output... [ 90%] fluids.units writing output... [ 92%] fluids.vectorized writing output... [ 95%] index writing output... [ 97%] modules writing output... [100%] tutorial /home/dparsons/scipy/python-fluids-0.1.72/fluids/packed_bed.py:docstring of fluids.packed_bed.Brauer:2: WARNING: citation not found: R496 /home/dparsons/scipy/python-fluids-0.1.72/fluids/packed_bed.py:docstring of fluids.packed_bed.Brauer:56: WARNING: citation not found: R496 /home/dparsons/scipy/python-fluids-0.1.72/docs/tutorial.rst:357: WARNING: undefined label: <tank> (if the link has no caption the label must precede a section header) generating indices... genindex py-modindex highlighting module code... [ 4%] fluids.atmosphere highlighting module code... [ 9%] fluids.compressible highlighting module code... [ 13%] fluids.control_valve highlighting module code... [ 18%] fluids.core highlighting module code... [ 22%] fluids.drag highlighting module code... [ 27%] fluids.filters highlighting module code... [ 31%] fluids.fittings highlighting module code... [ 36%] fluids.flow_meter highlighting module code... [ 40%] fluids.friction highlighting module code... [ 45%] fluids.geometry highlighting module code... [ 50%] fluids.mixing highlighting module code... [ 54%] fluids.open_flow highlighting module code... [ 59%] fluids.packed_bed highlighting module code... [ 63%] fluids.packed_tower highlighting module code... [ 68%] fluids.particle_size_distribution highlighting module code... [ 72%] fluids.piping highlighting module code... [ 77%] fluids.pump highlighting module code... [ 81%] fluids.safety_valve highlighting module code... [ 86%] fluids.saltation highlighting module code... [ 90%] fluids.separator highlighting module code... [ 95%] fluids.two_phase highlighting module code... [100%] fluids.two_phase_voidage writing additional pages... search copying images... [ 6%] fittings/contraction_sharp.png copying images... [ 13%] fittings/contraction_round.png copying images... [ 20%] fittings/contraction_conical.png copying images... [ 26%] fittings/contraction_beveled.png copying images... [ 33%] fittings/diffuser_conical.png copying images... [ 40%] fittings/curved_wall_diffuser.png copying images... [ 46%] fittings/flush_mounted_sharp_edged_entrance.png copying images... [ 53%] fittings/sharp_edged_entrace_extended_mount.png copying images... [ 60%] fittings/entrance_mounted_at_an_angle.png copying images... [ 66%] fittings/flush_mounted_rounded_entrance.png copying images... [ 73%] fittings/flush_mounted_beveled_entrance.png copying images... [ 80%] fittings/flush_mounted_beveled_orifice_entrance.png copying images... [ 86%] fittings/flush_mounted_exit.png copying images... [ 93%] fittings/bend_rounded.png copying images... [100%] fittings/bend_mitre.png copying static files... done copying extra files... done dumping search index in English (code: en) ... done dumping object inventory... done build succeeded, 13 warnings. The HTML pages are in build/html. make[1]: Leaving directory '/home/dparsons/scipy/python-fluids-0.1.72' dh_auto_test -O--buildsystem=pybuild -O--test-pytest I: pybuild base:217: cd /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build; python2.7 -m pytest tests ============================= test session starts ============================== platform linux2 -- Python 2.7.15+, pytest-3.10.1, py-1.7.0, pluggy-0.8.0 rootdir: /home/dparsons/scipy/python-fluids-0.1.72, inifile: pytest.ini plugins: cov-2.6.0 collected 271 items tests/test_atmosphere.py ... [ 1%] tests/test_compressible.py ................. [ 7%] tests/test_control_valve.py ... [ 8%] tests/test_core.py ... [ 9%] tests/test_design_climate.py ..s...s [ 12%] tests/test_drag.py ..... [ 14%] tests/test_filters.py . [ 14%] tests/test_fittings.py .................... [ 21%] tests/test_flow_meter.py ................................... [ 34%] tests/test_friction.py ........................... [ 44%] tests/test_geometry.py ........... [ 48%] tests/test_mixing.py . [ 49%] tests/test_open_flow.py . [ 49%] tests/test_packed_bed.py .. [ 50%] tests/test_packed_tower.py .... [ 51%] tests/test_particle_size_distribution.py ...................FF.......... [ 63%] [ 63%] tests/test_piping.py .. [ 63%] tests/test_pump.py ........... [ 67%] tests/test_safety_valve.py . [ 68%] tests/test_saltation.py ....... [ 70%] tests/test_separator.py .... [ 72%] tests/test_two_phase.py ......................... [ 81%] tests/test_two_phase_voidage.py ...................................... [ 95%] tests/test_units.py ........ [ 98%] tests/test_vectorized.py . [ 98%] tests/nrlmsise00/nrlmsise_00_test.py . [ 99%] tests/nrlmsise00/test_nrlmsise00_file_output.py . [ 99%] tests/nrlmsise00/test_nrlmsise00_full.py . [100%] =================================== FAILURES =================================== ________________________ test_PSDLognormal_ds_discrete _________________________ def test_PSDLognormal_ds_discrete(): # Test the cdf discrete dist = PSDLognormal(s=0.5, d_characteristic=5E-6) ds = dist.ds_discrete(d_min=1e-7, d_max=1e-6, pts=8) ans = dist.fractions_discrete(ds) fractions_expect = [2.55351295663786e-15, 3.831379657981415e-13, 3.762157252396037e-11, 2.41392961175535e-09, 1.01281244724305e-07, 2.7813750147487326e-06, 5.004382447515443e-05, 0.00059054208024234] > assert_allclose(fractions_expect, ans, rtol=1e-5) E AssertionError: E Not equal to tolerance rtol=1e-05, atol=0 E E Mismatch: 12.5% E Max absolute difference: 5.55111512e-17 E Max relative difference: 0.00014491 E x: array([2.553513e-15, 3.831380e-13, 3.762157e-11, 2.413930e-09, E 1.012812e-07, 2.781375e-06, 5.004382e-05, 5.905421e-04]) E y: array([2.553513e-15, 3.830825e-13, 3.762163e-11, 2.413930e-09, E 1.012812e-07, 2.781375e-06, 5.004382e-05, 5.905421e-04]) tests/test_particle_size_distribution.py:430: AssertionError _____________________________ test_PSDLognormal_dn _____________________________ def test_PSDLognormal_dn(): disc = PSDLognormal(s=0.5, d_characteristic=5E-6) # Test input of 1 ans = disc.dn(1) # The answer can vary quite a lot near the end, so it is safest just to # compare with the reverse, plugging it back to cdf assert_allclose(disc.cdf(ans), 1, rtol=1E-12) # assert_allclose(ans, 0.0002964902595794474) # Test zero input assert_allclose(disc.dn(0), 0) # Test 50% input ans = disc.dn(.5) assert_allclose(ans, 5.0e-06, rtol=1E-6) with pytest.raises(Exception): disc.dn(1.5) with pytest.raises(Exception): disc.dn(-.5) # Other orders of n - there is no comparison data for this yet!! assert_allclose(disc.pdf(1E-5), disc.pdf(1E-5, 3)) assert_allclose(disc.pdf(1E-5, 2), 13468.122877854335) assert_allclose(disc.pdf(1E-5, 1), 4628.2482296943508) assert_allclose(disc.pdf(1E-5, 0), 1238.6613794833427) # Some really large s tests - found some issues with this dist = PSDLognormal(s=4, d_characteristic=5E-6) > assert_allclose(dist.dn(1e-15), 8.220922763476676e-20, rtol=1e-3) E AssertionError: E Not equal to tolerance rtol=0.001, atol=0 E E Mismatch: 100% E Max absolute difference: 1.08103573e-21 E Max relative difference: 0.01314981 E x: array(8.112819e-20) E y: array(8.220923e-20) tests/test_particle_size_distribution.py:463: AssertionError =============================== warnings summary =============================== .pybuild/cpython2_2.7_fluids/build/tests/test_particle_size_distribution.py::test_PSDLognormal_mean_sizes_numerical /usr/lib/python2.7/dist-packages/numpy/core/function_base.py:277: DeprecationWarning: object of type <type 'float'> cannot be safely interpreted as an integer. y = linspace(start, stop, num=num, endpoint=endpoint, axis=axis) .pybuild/cpython2_2.7_fluids/build/tests/test_particle_size_distribution.py::test_PSDCustom_mean_sizes_numerical /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build/fluids/particle_size_distribution.py:2035: IntegrationWarning: The maximum number of subdivisions (50) has been achieved. If increasing the limit yields no improvement it is advised to analyze the integrand in order to determine the difficulties. If the position of a local difficulty can be determined (singularity, discontinuity) one will probably gain from splitting up the interval and calling the integrator on the subranges. Perhaps a special-purpose integrator should be used. return float(quad(to_int, d_min, d_max, points=points)[0]) # -- Docs: https://docs.pytest.org/en/latest/warnings.html ========= 2 failed, 267 passed, 2 skipped, 2 warnings in 46.23 seconds ========= E: pybuild pybuild:338: test: plugin distutils failed with: exit code=1: cd /home/dparsons/scipy/python-fluids-0.1.72/.pybuild/cpython2_2.7_fluids/build; python2.7 -m pytest tests dh_auto_test: pybuild --test --test-pytest -i python{version} -p 2.7 returned exit code 13 make: *** [debian/rules:10: build] Error 25 dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2
