Package: qcontrol Version: 0.5.6-4~bpo9+1 Severity: important Greetings, package maintainer!
I am running a QNAP TS-109 NAS on Debian, and post installation I noticed that qcontrol seemed not to work properly: the NAS does not beep post-boot, and the status led stays red/green blinking. Trying to use qcontrol directly outputs no error, but does nothing: ---8<--- root@vault:~# qcontrol --direct statusled greenon Register evdev on /dev/input/by-path/platform-gpio-keys-event confdir: loading from /etc/qcontrol.d... (no led change) root@vault:~# qcontrol --direct buzzer short Register evdev on /dev/input/by-path/platform-gpio-keys-event confdir: loading from /etc/qcontrol.d... (no buzzer sound) ---8<--- It looks like it might be a kernel-related problem, as I can see in dmesg: ---8<--- root@vault:~# dmesg|grep gpio [ 21.616406] synth uevent: /gpiochip0: failed to send uevent [ 21.616455] gpio gpiochip0: uevent: failed to send synthetic uevent [ 31.732294] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 34.725122] synth uevent: /gpiochip0: failed to send uevent [ 34.725173] gpio gpiochip0: uevent: failed to send synthetic uevent ---8<--- -- System Information: Debian Release: 9.9 APT prefers oldstable-updates APT policy: (500, 'oldstable-updates'), (500, 'oldstable') Architecture: armel (armv5tel) Kernel: Linux 4.19.0-0.bpo.5-marvell Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages qcontrol depends on: ii libc6 2.24-11+deb9u4 ii liblua5.1-0 5.1.5-8.1+b2 ii udev 232-25+deb9u11 qcontrol recommends no packages. qcontrol suggests no packages. -- no debconf information