Package: debci
Version: 2.11
Severity: normal
Dear Maintainer,
I intended to set up an armhf lxc container by running
debci setup -a armhf
as root on my amd64 system. The installation process terminated with
[...]
Timed out waiting for container to boot
lxc-stop: autopkgtest-unstable-armhf.new: tools/lxc_stop.c: main: 191
autopkgtest-unstable-armhf.new is not running
lxc-destroy: autopkgtest-unstable-armhf.new: tools/lxc_destroy.c: main: 271
Destroyed container autopkgtest-unstable-armhf.new
In /var/log/syslog I encountered these lines probably of relevance
Apr 26 17:16:25 e580sg kernel: [14086.041927] audit: type=1400
audit(1587914185.032:51): apparmor="STATUS" operation="profile_load"
profile="/usr/bin/lxc-start" name="lxc-autopkgtest-unstable-armhf.new_</var/lib
/lxc>" pid=88028 comm="apparmor_parser"
Apr 26 17:16:25 e580sg NetworkManager[686]: <info> [1587914185.0606] manager:
(vethSB9884): new Veth device (/org/freedesktop/NetworkManager/Devices/22)
Apr 26 17:16:25 e580sg kernel: [14086.064571] br0: port 2(vethS5LJSK) entered
blocking state
Apr 26 17:16:25 e580sg kernel: [14086.064573] br0: port 2(vethS5LJSK) entered
disabled state
Apr 26 17:16:25 e580sg kernel: [14086.064617] device vethS5LJSK entered
promiscuous mode
Apr 26 17:16:25 e580sg kernel: [14086.064692] br0: port 2(vethS5LJSK) entered
blocking state
Apr 26 17:16:25 e580sg kernel: [14086.064693] br0: port 2(vethS5LJSK) entered
forwarding state
Apr 26 17:16:25 e580sg kernel: [14086.066265] br0: port 2(vethS5LJSK) entered
disabled state
Apr 26 17:16:25 e580sg systemd-udevd[88029]: ethtool: autonegotiation is unset
or enabled, the speed and duplex are not writable.
Apr 26 17:16:25 e580sg NetworkManager[686]: <info> [1587914185.0618] manager:
(vethS5LJSK): new Veth device (/org/freedesktop/NetworkManager/Devices/23)
Apr 26 17:16:25 e580sg systemd-udevd[88029]: Using default interface naming
scheme 'v245'.
Apr 26 17:16:25 e580sg systemd-udevd[88029]: Could not set Alias=, MACAddress=
or MTU= on vethSB9884: No such device
Apr 26 17:16:25 e580sg systemd-udevd[88029]: vethSB9884: Could not apply link
config, ignoring: No such device
Apr 26 17:16:25 e580sg systemd-udevd[88030]: ethtool: autonegotiation is unset
or enabled, the speed and duplex are not writable.
Apr 26 17:16:25 e580sg systemd-udevd[88030]: Using default interface naming
scheme 'v245'.
Apr 26 17:16:25 e580sg kernel: [14086.092692] eth0: renamed from vethSB9884
Apr 26 17:16:25 e580sg gnome-shell[2393]: Removing a network device that was
not added
Apr 26 17:16:25 e580sg NetworkManager[686]: <info> [1587914185.1205] device
(vethS5LJSK): carrier: link connected
Apr 26 17:16:25 e580sg NetworkManager[686]: <info> [1587914185.1209] device
(br0): carrier: link connected
Apr 26 17:16:25 e580sg kernel: [14086.124443] IPv6: ADDRCONF(NETDEV_CHANGE):
eth0: link becomes ready
Apr 26 17:16:25 e580sg kernel: [14086.124480] IPv6: ADDRCONF(NETDEV_CHANGE):
vethS5LJSK: link becomes ready
Apr 26 17:16:25 e580sg kernel: [14086.124553] br0: port 2(vethS5LJSK) entered
blocking state
Apr 26 17:16:25 e580sg kernel: [14086.124555] br0: port 2(vethS5LJSK) entered
forwarding state
Apr 26 17:16:25 e580sg kernel: [14086.152175] audit: type=1400
audit(1587914185.144:52): apparmor="DENIED" operation="mount" info="failed
flags match" error=-13 profile="/usr/bin/lxc-start" name="/proc/sys/kerne
l/random/boot_id" pid=88031 comm="lxc-start" srcname="/dev/.lxc-boot-id"
flags="rw, bind"
Apr 26 17:16:25 e580sg kernel: [14086.154374] Not activating Mandatory Access
Control as /sbin/tomoyo-init does not exist.
Apr 26 17:16:25 e580sg kernel: [14086.248964] br0: port 2(vethS5LJSK) entered
disabled state
Apr 26 17:16:25 e580sg kernel: [14086.250781] device vethS5LJSK left
promiscuous mode
Apr 26 17:16:25 e580sg kernel: [14086.250785] br0: port 2(vethS5LJSK) entered
disabled state
Apr 26 17:16:25 e580sg NetworkManager[686]: <info> [1587914185.2731] device
(vethS5LJSK): released from master device br0
Apr 26 17:16:25 e580sg gnome-shell[2393]: Removing a network device that was
not added
Apr 26 17:16:25 e580sg kernel: [14086.394930] audit: type=1400
audit(1587914185.384:53): apparmor="STATUS" operation="profile_remove"
profile="/usr/bin/lxc-start" name="lxc-autopkgtest-unstable-
armhf.new_</var/lib/lxc>" pid=88076 comm="apparmor_parser"
These are the installed qemu packages
$ LANG=C dpkg -l 'qemu-*' | grep -v '^un'
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-========================-==============-============-======================================================================
ii qemu-efi-aarch64 0.0~20200229-2 all UEFI firmware for
64-bit ARM virtual machines
ii qemu-efi-arm 0.0~20200229-2 all UEFI firmware for
32-bit ARM virtual machines
ii qemu-kvm 1:4.2-6 amd64 QEMU Full
virtualization on x86 hardware
ii qemu-system 1:4.2-6 amd64 QEMU full system
emulation binaries
ii qemu-system-arm 1:4.2-6 amd64 QEMU full system
emulation binaries (arm)
ii qemu-system-common 1:4.2-6 amd64 QEMU full system
emulation binaries (common files)
ii qemu-system-data 1:4.2-6 all QEMU full system
emulation (data files)
ii qemu-system-gui 1:4.2-6 amd64 QEMU full system
emulation binaries (user interface and audio support)
ii qemu-system-mips 1:4.2-6 amd64 QEMU full system
emulation binaries (mips)
ii qemu-system-misc 1:4.2-6 amd64 QEMU full system
emulation binaries (miscellaneous)
ii qemu-system-ppc 1:4.2-6 amd64 QEMU full system
emulation binaries (ppc)
ii qemu-system-sparc 1:4.2-6 amd64 QEMU full system
emulation binaries (sparc)
ii qemu-system-x86 1:4.2-6 amd64 QEMU full system
emulation binaries (x86)
ii qemu-user-static 1:4.2-6 amd64 QEMU user mode
emulation binaries (static version)
ii qemu-utils 1:4.2-6 amd64 QEMU utilities
Building armhf packages via pbuilder works flawlessly, so I assume my qemu
setup being functional.
When aborting the installation right before the timeout occurs I can chroot
into the container's rootfs. But lxc-start fails.
Please look into this.
Regards,
Sven
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 5.5.0-2-amd64 (SMP w/8 CPU cores)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8),
LANGUAGE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages debci depends on:
ii adduser 3.118
ii amqp-tools 0.10.0-1
ii bsdmainutils 11.1.2+b1
ii curl 7.68.0-1
ii dctrl-tools 2.24-3+b1
ii debian-archive-keyring 2019.1
ii debootstrap 1.0.123
ii devscripts 2.20.2
ii distro-info 0.23
ii fonts-font-awesome 5.0.10+really4.7.0~dfsg-1
ii jq 1.6-1
ii libjs-bootstrap 3.4.1+dfsg-1
ii libjs-jquery 3.3.1~dfsg-3
ii libjs-jquery-flot 0.8.3+dfsg-1
ii moreutils 0.63-1+b1
ii netcat-traditional 1.10-41.1+b1
ii parallel 20161222-1.1
ii patchutils 0.3.4-2+b1
ii rsync 3.1.3-8
ii ruby 1:2.7+1
ii ruby-activerecord 2:5.2.4.1+dfsg-2
ii ruby-bunny 2.14.4-3
ii ruby-kaminari-activerecord 1.0.1-5
ii ruby-pg 1.1.3-3+b3
ii ruby-sinatra 2.0.8.1-2
ii ruby-sinatra-contrib 2.0.8.1-2
ii ruby-sqlite3 1.4.2-2+b2
ii ruby-thor 0.20.3-2
ii sudo 1.8.31p1-1
Versions of packages debci recommends:
ii ntp [time-daemon] 1:4.2.8p14+dfsg-2
Versions of packages debci suggests:
ii apt-cacher-ng 3.4-1
-- Configuration Files:
/etc/sudoers.d/debci [Errno 13] Keine Berechtigung: '/etc/sudoers.d/debci'
-- no debconf information
