>>>>> "Steve" == Steve McIntyre <st...@einval.com> writes: > Hmmm. Curious on a few things. Did you boot the installer > initially in CSM or BIOS mode? How is the BIOS/firmware on your > machine configured in terms of booting? Is it set up to boot > UEFI only? I'm worried that your system is normally only > configured to use UEFI, but you've started the installer in BIOS > mode and that has caaused your problems. > > Another issue that sometimes hits users on Dell laptops is the > disk controller setup. They're quite often set up by default in > "RAID" mode, and you may need to switch to "AHCI" to allow Linux > to work well.
Gaffer Tape, yes (your signature)! What do you mean by CSM (https://en.wikipedia.org/wiki/CSM)? I don't know the system longer than a few days, but I've tried everything the BIOS/UEFI setup offers for booting, and if memory serves I have started the first install from USB via `Legacy' boot. Interestingly i can boot the USB-stick with the jigdone debian-10.9.0-amd64-xfce-CD-1.iso any time. I cannot boot the (other) USB-stick with (umph) https-downloaded debian-live-10.9.0-amd64-xfce.iso, the Dell says depending on used boot options either `no bootable media found' or similar -- or it says `isolinux.bin missing or corrupt'. My workinglap HP Elitebook says the same about the latter USB-stick. And I have seen some debian bug-reports about similar problems with ISO-images on USB-sticks... Solution available? Maybe a younger or an older Release? Brgds, e. -- // enno....@gmx.net /\\\ Mag. Enno Deimel .\ o \\ \ _ \ Wisely and slow; they stumble that run fast. \\\ \_/ gpg-fp: eefe b049 6fe6 fc0b 0ec4 f39e af6a c178 eb98 909a