Hi Patrick,
good that you remind me of that ...
> Since (for myself?) this issue does not affect Debian bullseye downgrading
> the severity, because this release could not migrate then..
Fine with me.
I actually found the problem, I guess I have to report it upstream:
I have changed monitor and the new monitor has a higher resolution.
Now what has happened that in the kdenliverc (.config/) there was a
section
[MainWindow]
HDMI-A-0 Height 1080=1024
HDMI-A-0 Height 2048x1152=480
HDMI-A-0 Width 1920=1920
HDMI-A-0 Width 2048x1152=664
HDMI-A-0 Window-Maximized 1080x1920=true
HDMI-A-0 XPosition=0
HDMI-A-0 XPosition 2048x1152=0
HDMI-A-0 YPosition=29
HDMI-A-0 YPosition 2048x1152=30
Height 1080=702
RestorePositionForNextInstance=false
State=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
ToolBarsMovable=Disabled
Width 1920=1280
Window-Maximized 1080x1920=true
eDP-1 Height 1080=702
eDP-1 Width 1920=1280
eDP-1 XPosition=640
eDP-1 YPosition=29
but the new monitor has different resolution (2560x1440) and with that
monitor kdenlive simply crashed.
Removing this section made kdenlive start up again.
Looking into the newly generate kdenlive I actually don't see entries
about
eDP-1
HDMI-A-0
etc but only:
[MainWindow]
HDMI-A-0 Height 2048x1152=1020
HDMI-A-0 Width 2048x1152=1540
HDMI-A-0 XPosition 2048x1152=0
HDMI-A-0 YPosition 2048x1152=30
State=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
ToolBarsMovable=Disabled
so maybe some info of that couldn't be digested by kdenlive.
Anyway - feel free to close the bug or do whatever you think is correct.
If you want, I can reproduce this - just tried it and adding the section
makes it crash again ;-)
Best
Norbert
--
PREINING Norbert https://www.preining.info
Fujitsu + IFMGA Guide + TU Wien + TeX Live + Debian Dev
GPG: 0x860CDC13 fp: F7D8 A928 26E3 16A1 9FA0 ACF0 6CAC A448 860C DC13
