Source: beginend-el
Version: 2.3.0-1
Severity: serious
Justification: FTBFS
Tags: bookworm sid ftbfs
User: lu...@debian.org
Usertags: ftbfs-20220917 ftbfs-bookworm
Hi,
During a rebuild of all packages in sid, your package failed to build
on amd64.
Relevant part (hopefully):
> make[1]: Entering directory '/<<PKGBUILDDIR>>'
> skipping upstream build
> make[1]: Leaving directory '/<<PKGBUILDDIR>>'
> dh_elpa_test
> buttercup -L .
> Loading /etc/emacs/site-start.d/00debian.el (source)...
> Loading /etc/emacs/site-start.d/50autoconf.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Running 40 specs.
>
> beginend in a dired buffer
> ignores . and .. at the beginningMark set
>
> [32m ignores . and .. at the beginning[0m (68.38ms)
> ignores . and .. at the endMark set
>
> [32m ignores . and .. at the end[0m (14.30ms)
> ignores . at the beginning and .. at the endMark set
>
> [32m ignores . at the beginning and .. at the end[0m (11.98ms)
> ignores . and .. in the middleMark set
>
> [32m ignores . and .. in the middle[0m (14.23ms)
> ignores . and .. when they are hiddenMark set
>
> [32m ignores . and .. when they are hidden[0m (5.33ms)
> ignores . and .. when they are not hiddenMark set
>
> [32m ignores . and .. when they are not hidden[0m (10.01ms)
> ignores . and .. when they are hidden and the directory is emptyMark set
>
> [32m ignores . and .. when they are hidden and the directory is empty[0m
> (8.20ms)
> ignores . and .. when they are not hidden and the directory is emptyMark set
>
> [32m ignores . and .. when they are not hidden and the directory is
> empty[0m (7.45ms)
>
> beginend
> pushes mark
> when going to beginning
> if point is not at beginningMark set
>
> [31m if point is not at beginning[0m[31m FAILED[0m (83.77ms)
> only onceMark set
>
> [31m only once[0m[31m FAILED[0m (1.51ms)
> when going to end
> if point is not at endMark set
>
> [31m if point is not at end[0m[31m FAILED[0m (1.62ms)
> only onceMark set
>
> [31m only once[0m[31m FAILED[0m (1.29ms)
> does not push mark
> when going to beginning
> if point is already at beginning
> [31m if point is already at beginning[0m[31m FAILED[0m (1.26ms)
> if point is at point-min
> [31m if point is at point-min[0m[31m FAILED[0m (1.17ms)
> when going to end
> if point is already at end
> [31m if point is already at end[0m[31m FAILED[0m (1.19ms)
> if point is at point-max
> [31m if point is at point-max[0m[31m FAILED[0m (1.17ms)
>
> beginend, when narrowing is active,
> goes to point-min if beginning is outside the narrowed region
> [31m goes to point-min if beginning is outside the narrowed region[0m[31m
> FAILED[0m (1.12ms)
> goes to beginning if beginning is inside the narrowed regionMark set
>
> [31m goes to beginning if beginning is inside the narrowed region[0m[31m
> FAILED[0m (1.15ms)
> goes to point-max if end is outside the narrowed region
> [31m goes to point-max if end is outside the narrowed region[0m[31m
> FAILED[0m (1.26ms)
> goes to end if end is inside the narrowed region
> [31m goes to end if end is inside the narrowed region[0m[31m FAILED[0m
> (1.24ms)
> does not move point
> when going to beginning and beginning outside the narrowed region if
> point is already at point-min
> [31m when going to beginning and beginning outside the narrowed region if
> point is already at point-min[0m[31m FAILED[0m (1.40ms)
> when going to end and end outside the narrowed region if point is already
> at point-max
> [31m when going to end and end outside the narrowed region if point is
> already at point-max[0m[31m FAILED[0m (1.38ms)
> does not mark
> when going to beginning and beginning outside the narrowed region if
> point is already at point-min
> [31m when going to beginning and beginning outside the narrowed region if
> point is already at point-min[0m[31m FAILED[0m (1.39ms)
> when going to end and end outside the narrowed region if point is already
> at point-max
> [31m when going to end and end outside the narrowed region if point is
> already at point-max[0m[31m FAILED[0m (1.14ms)
> correctly detects out of bounds
> when point is before point-min
> [31m when point is before point-min[0m[31m FAILED[0m (1.11ms)
> when point is after point-max
> [31m when point is after point-max[0m[31m FAILED[0m (1.23ms)
> when point is between point-min point-max
> [31m when point is between point-min point-max[0m[31m FAILED[0m
> (1.22ms)
>
> beginend
> in org-mode
> goes back to position 0 if that's a headingMark set
>
> [32m goes back to position 0 if that's a heading[0m (0.19ms)
> goes to second line if that's where the 1st heading is
> [32m goes to second line if that's where the 1st heading is[0m (0.11ms)
> goes to 1st heading if the buffer starts with properties
> [32m goes to 1st heading if the buffer starts with properties[0m (0.09ms)
> goes to (point-min) if there is just one characterMark set
>
> [32m goes to (point-min) if there is just one character[0m (0.11ms)
> stays at (point-min) if buffer is empty
> [32m stays at (point-min) if buffer is empty[0m (0.09ms)
>
> beginend
> in prog-mode
> uses prog-mode-code-position-p to know where code beginsMark set
>
> [32m uses prog-mode-code-position-p to know where code begins[0m (0.11ms)
> uses prog-mode-code-position-p to know where code endMark set
>
> [32m uses prog-mode-code-position-p to know where code end[0m (0.09ms)
> moves point to beginning of first code lineMark set
>
> [32m moves point to beginning of first code line[0m (0.20ms)
> moves point to end of last code lineMark set
>
> [32m moves point to end of last code line[0m (0.17ms)
> beginend--prog-mode-code-position-p
> returns non-nil for a line of code
> [32m returns non-nil for a line of code[0m (0.33ms)
> returns nil
> for a line of comment
> [32m for a line of comment[0m (26.47ms)
> for an empty line
> [32m for an empty line[0m (0.38ms)
> for a line with ^L
> [32m for a line with ^L[0m (0.20ms)
>
> ========================================
> [31mbeginend pushes mark when going to beginning if point is not at
> beginning[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil
> (253...
> buttercup--run-suite(#s(buttercup-suite "pushes mark" #s(buttercup-suite
> "...
> buttercup--run-suite(#s(buttercup-suite "when going to beginning"
> #s(butte...
> buttercup--run-spec(#s(buttercup-spec "if point is not at beginning"
> #s(bu...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is not at
> begin...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend pushes mark when going to beginning only once[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil
> (253...
> buttercup--run-suite(#s(buttercup-suite "pushes mark" #s(buttercup-suite
> "...
> buttercup--run-suite(#s(buttercup-suite "when going to beginning"
> #s(butte...
> buttercup--run-spec(#s(buttercup-spec "only once" #s(buttercup-suite
> "when...
> buttercup--update-with-funcall(#s(buttercup-spec "only once"
> #s(buttercup-...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend pushes mark when going to end if point is not at end[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil
> (253...
> buttercup--run-suite(#s(buttercup-suite "pushes mark" #s(buttercup-suite
> "...
> buttercup--run-suite(#s(buttercup-suite "when going to end"
> #s(buttercup-s...
> buttercup--run-spec(#s(buttercup-spec "if point is not at end"
> #s(buttercu...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is not at end"
> ...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend pushes mark when going to end only once[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil
> (253...
> buttercup--run-suite(#s(buttercup-suite "pushes mark" #s(buttercup-suite
> "...
> buttercup--run-suite(#s(buttercup-suite "when going to end"
> #s(buttercup-s...
> buttercup--run-spec(#s(buttercup-spec "only once" #s(buttercup-suite
> "when...
> buttercup--update-with-funcall(#s(buttercup-spec "only once"
> #s(buttercup-...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend does not push mark when going to beginning if point is already
> at beginning[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil
> (253...
> buttercup--run-suite(#s(buttercup-suite "does not push mark"
> #s(buttercup-...
> buttercup--run-suite(#s(buttercup-suite "when going to beginning"
> #s(butte...
> buttercup--run-spec(#s(buttercup-spec "if point is already at beginning"
> #...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is already at
> b...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend does not push mark when going to beginning if point is at
> point-min[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil
> (253...
> buttercup--run-suite(#s(buttercup-suite "does not push mark"
> #s(buttercup-...
> buttercup--run-suite(#s(buttercup-suite "when going to beginning"
> #s(butte...
> buttercup--run-spec(#s(buttercup-spec "if point is at point-min"
> #s(butter...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is at
> point-min...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend does not push mark when going to end if point is already at
> end[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil
> (253...
> buttercup--run-suite(#s(buttercup-suite "does not push mark"
> #s(buttercup-...
> buttercup--run-suite(#s(buttercup-suite "when going to end"
> #s(buttercup-s...
> buttercup--run-spec(#s(buttercup-spec "if point is already at end"
> #s(butt...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is already at
> e...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend does not push mark when going to end if point is at
> point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil
> (253...
> buttercup--run-suite(#s(buttercup-suite "does not push mark"
> #s(buttercup-...
> buttercup--run-suite(#s(buttercup-suite "when going to end"
> #s(buttercup-s...
> buttercup--run-spec(#s(buttercup-spec "if point is at point-max"
> #s(butter...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is at
> point-max...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend, when narrowing is active, goes to point-min if beginning is
> outside the narrowed region[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is
> activ...
> buttercup--run-spec(#s(buttercup-spec "goes to point-min if beginning is
> o...
> buttercup--update-with-funcall(#s(buttercup-spec "goes to point-min if
> beg...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend, when narrowing is active, goes to beginning if beginning is
> inside the narrowed region[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is
> activ...
> buttercup--run-spec(#s(buttercup-spec "goes to beginning if beginning is
> i...
> buttercup--update-with-funcall(#s(buttercup-spec "goes to beginning if
> beg...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend, when narrowing is active, goes to point-max if end is outside
> the narrowed region[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is
> activ...
> buttercup--run-spec(#s(buttercup-spec "goes to point-max if end is
> outside...
> buttercup--update-with-funcall(#s(buttercup-spec "goes to point-max if
> end...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend, when narrowing is active, goes to end if end is inside the
> narrowed region[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is
> activ...
> buttercup--run-spec(#s(buttercup-spec "goes to end if end is inside the
> na...
> buttercup--update-with-funcall(#s(buttercup-spec "goes to end if end is
> in...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend, when narrowing is active, does not move point when going to
> beginning and beginning outside the narrowed region if point is already at
> point-min[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is
> activ...
> buttercup--run-suite(#s(buttercup-suite "does not move point"
> #s(buttercup...
> buttercup--run-spec(#s(buttercup-spec "when going to beginning and
> beginni...
> buttercup--update-with-funcall(#s(buttercup-spec "when going to beginning
> ...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend, when narrowing is active, does not move point when going to
> end and end outside the narrowed region if point is already at point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is
> activ...
> buttercup--run-suite(#s(buttercup-suite "does not move point"
> #s(buttercup...
> buttercup--run-spec(#s(buttercup-spec "when going to end and end outside
> t...
> buttercup--update-with-funcall(#s(buttercup-spec "when going to end and
> en...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend, when narrowing is active, does not mark when going to
> beginning and beginning outside the narrowed region if point is already at
> point-min[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is
> activ...
> buttercup--run-suite(#s(buttercup-suite "does not mark"
> #s(buttercup-suite...
> buttercup--run-spec(#s(buttercup-spec "when going to beginning and
> beginni...
> buttercup--update-with-funcall(#s(buttercup-spec "when going to beginning
> ...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend, when narrowing is active, does not mark when going to end and
> end outside the narrowed region if point is already at point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is
> activ...
> buttercup--run-suite(#s(buttercup-suite "does not mark"
> #s(buttercup-suite...
> buttercup--run-spec(#s(buttercup-spec "when going to end and end outside
> t...
> buttercup--update-with-funcall(#s(buttercup-spec "when going to end and
> en...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend, when narrowing is active, correctly detects out of bounds when
> point is before point-min[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is
> activ...
> buttercup--run-suite(#s(buttercup-suite "correctly detects out of bounds"
> ...
> buttercup--run-spec(#s(buttercup-spec "when point is before point-min"
> #s(...
> buttercup--update-with-funcall(#s(buttercup-spec "when point is before
> poi...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend, when narrowing is active, correctly detects out of bounds when
> point is after point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is
> activ...
> buttercup--run-suite(#s(buttercup-suite "correctly detects out of bounds"
> ...
> buttercup--run-spec(#s(buttercup-spec "when point is after point-max"
> #s(b...
> buttercup--update-with-funcall(#s(buttercup-spec "when point is after
> poin...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> ========================================
> [31mbeginend, when narrowing is active, correctly detects out of bounds when
> point is between point-min point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer"
> nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired
> buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is
> activ...
> buttercup--run-suite(#s(buttercup-suite "correctly detects out of bounds"
> ...
> buttercup--run-spec(#s(buttercup-spec "when point is between point-min
> poi...
> buttercup--update-with-funcall(#s(buttercup-spec "when point is between
> po...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil
> nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> error("Cannot find suitable directory for output in
> `native-comp-eln-load-...
> error: (error "Cannot find suitable directory for output in
> ‘native-comp-eln-load-path’")
>
> Ran 40 specs, [31m19 failed[0m, in 14.86s.
> Debugger entered--Lisp error: (error "")
> error("")
> buttercup--run-suites((#s(buttercup-suite :description "beginend in a dired
> buffer" :parent nil :status passed :failure-description nil :failure-stack
> nil :time-started (25382 10395 44173 62000) :time-ended (25382 10395 186180
> 886000) :children (... ... ... ... ... ... ... ...) :before-each nil
> :after-each nil :before-all nil :after-all nil) #s(buttercup-suite
> :description "beginend" :parent nil :status passed :failure-description nil
> :failure-stack nil :time-started (25382 10395 186232 409000) :time-ended
> (25382 10395 279657 418000) :children (... ...) :before-each (...)
> :after-each nil :before-all nil :after-all nil) #s(buttercup-suite
> :description "beginend, when narrowing i..." :parent nil :status passed
> :failure-description nil :failure-stack nil :time-started (25382 10395 279670
> 797000) :time-ended (25382 10395 293996 908000) :children (... ... ... ...
> ... ... ...) :before-each (...) :after-each nil :before-all nil :after-all
> nil) #s(buttercup-suite :description "beginend" :parent nil :status passed
> :failure-description nil :failure-stack nil :time-started (25382 10395 294011
> 251000) :time-ended (25382 10395 294766 993000) :children (...) :before-each
> nil :after-each nil :before-all nil :after-all nil) #s(buttercup-suite
> :description "beginend" :parent nil :status passed :failure-description nil
> :failure-stack nil :time-started (25382 10395 294780 408000) :time-ended
> (25382 10395 323172 524000) :children (... ...) :before-each nil :after-each
> nil :before-all nil :after-all nil)) nil)
> buttercup-run()
> buttercup-run-discover()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover"
> "--"))
> command-line()
> normal-top-level()
>
> dh_elpa_test: error: buttercup -L . returned exit code 255
> make: *** [debian/rules:4: binary] Error 25
The full build log is available from:
http://qa-logs.debian.net/2022/09/17/beginend-el_2.3.0-1_unstable.log
All bugs filed during this archive rebuild are listed at:
https://bugs.debian.org/cgi-bin/pkgreport.cgi?tag=ftbfs-20220917;users=lu...@debian.org
or:
https://udd.debian.org/bugs/?release=na&merged=ign&fnewerval=7&flastmodval=7&fusertag=only&fusertagtag=ftbfs-20220917&fusertaguser=lu...@debian.org&allbugs=1&cseverity=1&ctags=1&caffected=1#results
A list of current common problems and possible solutions is available at
http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute!
If you reassign this bug to another package, please marking it as 'affects'-ing
this package. See https://www.debian.org/Bugs/server-control#affects
If you fail to reproduce this, please provide a build log and diff it with mine
so that we can identify if something relevant changed in the meantime.
