Package: systemd Version: 253.5-1 Severity: normal -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256
I'm working on a Debian system/image for Pine64's PineTab2 (tablet) and by default when I (short) press the power button, the device powers off. Right now I'm not using any DE, so it's a CLI only system. When I created /etc/systemd/logind.conf.d/custom.conf with HandlePowerKey=ignore Nothing changed after restarting systemd-logind.service or rebooting, IOW the system shut down. Confusingly `sudo systemd-analyze cat-config systemd/logind.conf` *did* show the setting, making me think it was configured correctly. The PineTab2 is shipped with an ArchLinuxARM system and when I logged in to a VT, pressing the power button shut the system down. But when I set `HandlePowerKey=ignore` in /etc/systemd/logind.conf, pressing the power key got ignored. I then renamed `custom.conf` to `custom.conf.disabled` on my Debian system and made the change directly in /etc/systemd/logind.conf and then it worked! When I did the reverse on the ALARM system, so it was only configured in logind.conf.d/custom.conf, then the tablet turned off. So on both Debian and ALARM, when specifying `HandlePowerKey=ignore` in /etc/systemd/logind.conf.d/custom.conf, the setting does NOT work and the tablet powers down when pressing the power button. But on both systems the setting does work when set in /etc/systemd/logind.conf and pressing the power button gets ignored. While I'm reporting it against the version in Unstable, there's a rather high chance the issue also occurs on Testing/Trixie and probably even on Bookworm (which my Debian system started out with). But I only tried editing logind.conf directly after I had upgraded the system first to Trixie and then to Sid. Note: This bug report is NOT send from the (arm64) PineTab2 but my normal (amd64) PC, but I don't think that matters. If it does/would, I could start over again on the PT2, but hopefully that isn't needed. Cheers, Diederik - -- Package-specific info: - -- System Information: Debian Release: trixie/sid APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (500, 'testing'), (101, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 6.3.0-2-amd64 (SMP w/16 CPU threads; PREEMPT) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages systemd depends on: ii libacl1 2.3.1-3 ii libaudit1 1:3.1.1-1 ii libblkid1 2.38.1-6 ii libc6 2.37-5 ii libcap2 1:2.66-4 ii libcryptsetup12 2:2.6.1-4 ii libfdisk1 2.38.1-6 ii libgcrypt20 1.10.2-2 ii libkmod2 30+20230519-1 ii liblz4-1 1.9.4-1 ii liblzma5 5.4.1-0.2 ii libmount1 2.38.1-6 ii libp11-kit0 0.25.0-3 ii libseccomp2 2.5.4-1+b3 ii libselinux1 3.5-1 ii libssl3 3.0.9-1 ii libsystemd-shared 253.5-1 ii libsystemd0 253.5-1 ii libzstd1 1.5.5+dfsg2-1 ii mount 2.38.1-6 ii systemd-dev 253.5-1 Versions of packages systemd recommends: ii dbus [default-dbus-system-bus] 1.14.8-2 ii ntpsec [time-daemon] 1.2.2+dfsg1-1 Versions of packages systemd suggests: ii libfido2-1 1.13.0-1 ii libqrencode4 4.1.1-1 ii libtss2-esys-3.0.2-0 4.0.1-1 ii libtss2-mu0 4.0.1-1 pn libtss2-rc0 <none> ii policykit-1 122-4 ii polkitd 122-4 pn systemd-boot <none> ii systemd-container 253.5-1 pn systemd-homed <none> pn systemd-resolved <none> pn systemd-userdbd <none> Versions of packages systemd is related to: ii dbus-user-session 1.14.8-2 pn dracut <none> ii initramfs-tools 0.142 pn libnss-systemd <none> ii libpam-systemd 253.5-1 ii udev 253.5-1 - -- no debconf information -----BEGIN PGP SIGNATURE----- iHUEARYIAB0WIQT1sUPBYsyGmi4usy/XblvOeH7bbgUCZK7zTgAKCRDXblvOeH7b bumiAQCc5FQ2l+byOotVjv8D39wyrZNou/UPy9/owCWHlDWnogD/WHZUgkfj6zuQ IurqY7ZxS5y1T5lmu4ofBcbqNupkJgI= =pptn -----END PGP SIGNATURE-----
