Package: src:linux
Version: 6.1.76-1
Severity: critical
Justification: breaks the whole system
X-Debbugs-Cc: leeejobsacco...@mail.co.uk

Dear Maintainer,

   * What led up to the situation?

   Trying to boot the system with the 6.1.0-18 kernel

   * What exactly did you do (or not do) that was effective (or
     ineffective)?

   I tried adding 'boot_delay=1000' boot option to slow the console
   scroll rate, to enable better recording of the error messages.

   I tried rebooting the previous 6.1.0-17 kernel.

   * What was the outcome of this action?

   After adding the 'boot_delay=1000' option the boot process
   progressed no further than "Loading initial ramdisk ..."
   (left for several minutes - required power cycle).

   The system boots sucessfully on the previous 6.1.0-17 kernel

   * What outcome did you expect instead?

   I expected the system to successfully boot.

   * Additional observations

   This system also normally includes 'hpet=disable' and
   'acpi_enforce_resources=lax' boot options but removing these
   made no difference.

   Although I was not able to boot the system with the
   'boot_delay=1000' option and obtain clear photographs of the
   console output - the ones I've attached suffer from
   'overprinting' - it does seem clear that ACPI errors are
   being reported.

   There appear to be two distinct phases to this problem.
   Initially, ACPI seems to be reporting errors for "GPE", as
   shown in the first attached photograph, but after ~10 seconds
   or so, ACPI then switches to continuously reporting an error
   for PM_TIMER, as shown in the second attached photograph. At
   this point a power cycle is required.

   Purging and reinstalling the package made no difference. Atm,
   only three kernels are installed on this system but I have
   had more in the past as I normally compile my own kernels
   from the corresponding Debian source package. My own 6.1.76-1
   kernel also suffers from the same problem, whereas my own
   6.1.69-1 kernel boots and runs Ok.

   Comparing the kernel configs for 6.1.0-17 and 6.1.0-18
   showed just one functional change - an additional
   Compile-time checks and compiler option, which did not seem
   relevant to this problem.


-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: E203NA
product_version: 1.0       
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0       
bios_vendor: American Megatrends Inc.
bios_version: E203NA.312
board_vendor: ASUSTeK COMPUTER INC.
board_name: E203NA
board_version: 1.0       

** Network interface configuration:
*** /etc/network/interfaces:

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Celeron N3350/Pentium N4200/Atom 
E3900 Series Host Bridge [8086:5af0] (rev 0b)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series Host Bridge [1043:1980]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        IOMMU group: 1

00:00.1 Signal processing controller [1180]: Intel Corporation Device 
[8086:5a8c] (rev 0b)
        Subsystem: ASUSTeK Computer Inc. Device [1043:1980]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx+
        Latency: 0
        Interrupt: pin B routed to IRQ 24
        IOMMU group: 1
        Region 0: Memory at 91310000 (64-bit, non-prefetchable) [size=32K]
        Capabilities: [d0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>
        Kernel driver in use: proc_thermal
        Kernel modules: processor_thermal_device_pci_legacy

00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 500 
[8086:5a85] (rev 0b) (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. HD Graphics 500 [1043:1980]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 125
        IOMMU group: 0
        Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
        Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at f000 [size=64]
        Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
        Capabilities: [40] Vendor Specific Information: Len=0c <?>
        Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+ FLReset+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- 
TransPend-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis- 
NROPrPrP- LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
10BitTagReq- OBFF Disabled,
                         AtomicOpsCtl: ReqEn-
        Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00018  Data: 0000
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100 v1] Process Address Space ID (PASID)
                PASIDCap: Exec+ Priv-, Max PASID Width: 14
                PASIDCtl: Enable- Exec- Priv-
        Capabilities: [200 v1] Address Translation Service (ATS)
                ATSCap: Invalidate Queue Depth: 00
                ATSCtl: Enable-, Smallest Translation Unit: 00
        Capabilities: [300 v1] Page Request Interface (PRI)
                PRICtl: Enable- Reset-
                PRISta: RF- UPRGI- Stopped-
                Page Request Capacity: 00008000, Page Request Allocation: 
00000000
        Kernel driver in use: i915
        Kernel modules: i915

00:0e.0 Audio device [0403]: Intel Corporation Celeron N3350/Pentium N4200/Atom 
E3900 Series Audio Cluster [8086:5a98] (rev 0b)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series Audio Cluster [1043:1980]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 127
        IOMMU group: 2
        Region 0: Memory at 91318000 (64-bit, non-prefetchable) [size=16K]
        Region 4: Memory at 91200000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
        Capabilities: [80] Vendor Specific Information: Len=14 <?>
        Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee00398  Data: 0000
        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE- FLReset+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel, snd_soc_skl, snd_sof_pci_intel_apl

00:0f.0 Communication controller [0780]: Intel Corporation Celeron 
N3350/Pentium N4200/Atom E3900 Series Trusted Execution Engine [8086:5a9a] (rev 
0b)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series Trusted Execution Engine [1043:1980]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 126
        IOMMU group: 3
        Region 0: Memory at 91327000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee00338  Data: 0000
        Capabilities: [a4] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:12.0 SATA controller [0106]: Intel Corporation Celeron N3350/Pentium 
N4200/Atom E3900 Series SATA AHCI Controller [8086:5ae3] (rev 0b) (prog-if 01 
[AHCI 1.0])
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series SATA AHCI Controller [1043:1980]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 124
        IOMMU group: 4
        Region 0: Memory at 9131c000 (32-bit, non-prefetchable) [size=8K]
        Region 1: Memory at 91324000 (32-bit, non-prefetchable) [size=256]
        Region 2: I/O ports at f090 [size=8]
        Region 3: I/O ports at f080 [size=4]
        Region 4: I/O ports at f060 [size=32]
        Region 5: Memory at 91323000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee002f8  Data: 0000
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
        Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
        Kernel driver in use: ahci
        Kernel modules: ahci

00:13.0 PCI bridge [0604]: Intel Corporation Celeron N3350/Pentium N4200/Atom 
E3900 Series PCI Express Port A #2 [8086:5ad9] (rev fb) (prog-if 00 [Normal 
decode])
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series PCI Express Port A [1043:1980]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 122
        IOMMU group: 5
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: 91000000-911fffff [size=2M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
                LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <1us, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #3, PowerLimit 10W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCap: CRSVisible-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- 
LTR+
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd+
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ 
10BitTagReq- OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 
2Retimers- DRS-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00218  Data: 0000
        Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Celeron 
N3350/Pentium N4200/Atom E3900 Series PCI Express Port A [1043:1980]
        Capabilities: [a0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100 v0] Null
        Capabilities: [140 v1] Access Control Services
                ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- 
EgressCtrl- DirectTrans-
                ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- 
EgressCtrl- DirectTrans-
        Capabilities: [150 v0] Null
        Capabilities: [200 v0] Null
        Kernel driver in use: pcieport

00:15.0 USB controller [0c03]: Intel Corporation Celeron N3350/Pentium 
N4200/Atom E3900 Series USB xHCI [8086:5aa8] (rev 0b) (prog-if 30 [XHCI])
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series USB xHCI [1043:201f]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 123
        IOMMU group: 6
        Region 0: Memory at 91300000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [70] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
                Address: 00000000fee002b8  Data: 0000
        Capabilities: [90] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

00:17.0 Signal processing controller [1180]: Intel Corporation Celeron 
N3350/Pentium N4200/Atom E3900 Series I2C Controller #5 [8086:5ab4] (rev 0b)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series I2C Controller [1043:1980]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 31
        IOMMU group: 7
        Region 0: Memory at 91322000 (64-bit, non-prefetchable) [size=4K]
        Region 2: Memory at 91321000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: intel-lpss
        Kernel modules: intel_lpss_pci

00:1c.0 SD Host controller [0805]: Intel Corporation Celeron N3350/Pentium 
N4200/Atom E3900 Series eMMC Controller [8086:5acc] (rev 0b) (prog-if 01)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series eMMC Controller [1043:1980]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 39
        IOMMU group: 8
        Region 0: Memory at 91320000 (64-bit, non-prefetchable) [size=4K]
        Region 2: Memory at 9131f000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Vendor Specific Information: Len=14 <?>
        Kernel driver in use: sdhci-pci
        Kernel modules: sdhci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation Celeron N3350/Pentium N4200/Atom 
E3900 Series Low Pin Count Interface [8086:5ae8] (rev 0b)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series Low Pin Count Interface [1043:1980]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        IOMMU group: 9
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich

00:1f.1 SMBus [0c05]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 
Series SMBus Controller [8086:5ad4] (rev 0b)
        Subsystem: ASUSTeK Computer Inc. Celeron N3350/Pentium N4200/Atom E3900 
Series SMBus Controller [1043:1980]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ -2147483648
        IOMMU group: 9
        Region 0: Memory at 9131e000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at f040 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless 
Network Adapter [168c:0042] (rev 31)
        Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter 
[1a3b:2a51]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 128
        IOMMU group: 5
        Region 0: Memory at 91000000 (64-bit, non-prefetchable) [size=2M]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit-
                Address: fee003b8  Data: 0000
                Masking: 000000fe  Pending: 00000000
        Capabilities: [70] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
unlimited, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- 
SlotPowerLimit 10W
                DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq- AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <4us, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+ 
NROPrPrP- LTR+
                         10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- TPHComp- ExtTPHComp-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ 
10BitTagReq- OBFF Disabled,
                         AtomicOpsCtl: ReqEn-
                LnkCap2: Supported Link Speeds: 2.5GT/s, Crosslink- Retimer- 
2Retimers- DRS-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB 
preshoot
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- 
EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [100 v2] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP+ Rollover+ Timeout+ 
AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- 
ECRCChkCap- ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Capabilities: [148 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [168 v1] Device Serial Number 00-00-00-00-00-00-00-00
        Capabilities: [178 v1] Latency Tolerance Reporting
                Max snoop latency: 3145728ns
                Max no snoop latency: 3145728ns
        Capabilities: [180 v1] L1 PM Substates
                L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ 
L1_PM_Substates+
                          PortCommonModeRestoreTime=50us PortTPowerOnTime=10us
                L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
                           T_CommonMode=0us LTR1.2_Threshold=0ns
                L1SubCtl2: T_PwrOn=10us
        Kernel driver in use: ath10k_pci
        Kernel modules: ath10k_pci


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b54b Chicony Electronics Co., Ltd USB2.0 VGA UVC 
WebCam
Bus 001 Device 002: ID 13d3:3501 IMC Networks 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 12.5
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 6.1.0-17-amd64 (SMP w/2 CPU threads; PREEMPT)
Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1), LANGUAGE=en_GB:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.1.0-18-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.142
ii  kmod                                    30+20221128-1
ii  linux-base                              4.9

Versions of packages linux-image-6.1.0-18-amd64 recommends:
ii  apparmor             3.0.8-3
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-6.1.0-18-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.06-13+deb12u1
pn  linux-doc-6.1           <none>

Versions of packages linux-image-6.1.0-18-amd64 is related to:
ii  firmware-amd-graphics     20230210-5
ii  firmware-atheros          20230210-5
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20230210-5
ii  firmware-misc-nonfree     20230210-5
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

Reply via email to