Package: src:pyopencl Version: 2025.1-1 Severity: important Tags: forky sid ftbfs User: [email protected] Usertags: ftbfs-nocheck-profile
Dear maintainer: During a rebuild of all packages in unstable using the nocheck build profile, your package failed to build. Below you will find how the build ends (probably the most relevant part, but not necessarily). If required, the full build log is available here: https://people.debian.org/~sanvila/build-logs/202509/ A wiki page discussing how to reproduce bugs in this category and possible solutions is available here: https://wiki.debian.org/qa.debian.org/FTBFS/Nocheck (It's a wiki, so you are welcome to contribute) [ Note: This is RC, but I will wait at least two weeks before raising the severities, there are a lot of gcc-15 and CMake 4 bugs open now ]. About the archive rebuild: The build was made on virtual machines from AWS, using sbuild and a reduced chroot with only build-essential packages. If you could not reproduce the bug please contact me privately, as I am willing to provide ssh access to a virtual machine where the bug is fully reproducible. If this is really a bug in one of the build-depends, please use reassign and add an affects on src:pyopencl, so that this is still visible in the BTS web page for this package. Thanks. -------------------------------------------------------------------------------- [...] debian/rules clean dh clean --buildsystem pybuild dh_auto_clean -O--buildsystem=pybuild pybuild --clean -i python{version} -p 3.13 D: pybuild pybuild:602: version: 6.20250414 D: pybuild pybuild:603: ['/usr/bin/pybuild', '--clean', '-i', 'python{version}', '-p', '3.13'] D: pybuild pybuild:39: cfg: Namespace(verbose=True, quiet=Fa [too-long-redacted] sable=None, custom_tests=False) D: pybuild __init__:37: cannot initialize 'meson' plugin: Missing command 'meson' D: pybuild tools:232: invoking: /usr/bin/dpkg-architecture D: pybuild debhelper:166: skipping package python-pyopencl-doc (missing ${python3:Depends} in Depends/Recommends) D: pybuild debhelper:174: source=pyopencl, binary packages=['python3-pyopencl'] D: pybuild pybuild:151: detected build system: pyproject (certainty: 99%) D: pybuild debhelper:166: skipping package python-pyopencl-doc (missing ${python3:Depends} in Depends/Recommends) D: pybuild debhelper:174: source=pyopencl, binary packages=['python3-pyopencl'] D: pybuild plugin_pyproject:94: removing '/<<PKGBUILDDIR>>/.pybuild/cpython3_3.13/build' (and everything under it) rm -rf .pybuild/ find . -name \*.pyc -exec rm {} \; debian/rules execute_after_dh_auto_clean make[1]: Entering directory '/<<PKGBUILDDIR>>' rm -f -r doc/_build/ rm -f doc/constants.inc make[1]: Leaving directory '/<<PKGBUILDDIR>>' dh_autoreconf_clean -O--buildsystem=pybuild dh_clean -O--buildsystem=pybuild rm -f debian/debhelper-build-stamp rm -rf debian/.debhelper/ rm -f -- debian/python3-pyopencl.substvars debian/python-pyopencl-doc.substvars debian/files rm -fr -- debian/python3-pyopencl/ debian/tmp/ debian/python-pyopencl-doc/ find . \( \( \ \( -path .\*/.git -o -path .\*/.svn -o -path .\*/.bzr -o -path .\*/.hg -o -path .\*/CVS -o -path .\*/.pc -o -path .\*/_darcs \) -prune -o -type f -a \ \( -name '#*#' -o -name '.*~' -o -name '*~' -o -name DEADJOE \ -o -name '*.orig' -o -name '*.rej' -o -name '*.bak' \ -o -name '.*.orig' -o -name .*.rej -o -name '.SUMS' \ -o -name TAGS -o \( -path '*/.deps/*' -a -name '*.P' \) \ \) -exec rm -f {} + \) -o \ \( -type d -a \( -name autom4te.cache -o -name __pycache__ \) -prune -exec rm -rf {} + \) \) debian/rules binary dh binary --buildsystem pybuild dh_update_autotools_config -O--buildsystem=pybuild dh_autoreconf -O--buildsystem=pybuild dh_auto_configure -O--buildsystem=pybuild pybuild --configure -i python{version} -p 3.13 D: pybuild pybuild:602: version: 6.20250414 D: pybuild pybuild:603: ['/usr/bin/pybuild', '--configure', '-i', 'python{version}', '-p', '3.13'] D: pybuild pybuild:39: cfg: Namespace(verbose=True, quiet=Fa [too-long-redacted] sable=None, custom_tests=False) D: pybuild __init__:37: cannot initialize 'meson' plugin: Missing command 'meson' D: pybuild tools:232: invoking: /usr/bin/dpkg-architecture D: pybuild debhelper:166: skipping package python-pyopencl-doc (missing ${python3:Depends} in Depends/Recommends) D: pybuild debhelper:174: source=pyopencl, binary packages=['python3-pyopencl'] D: pybuild pybuild:151: detected build system: pyproject (certainty: 99%) dh_auto_build -O--buildsystem=pybuild pybuild --build -i python{version} -p 3.13 D: pybuild pybuild:602: version: 6.20250414 D: pybuild pybuild:603: ['/usr/bin/pybuild', '--build', '-i', 'python{version}', '-p', '3.13'] D: pybuild pybuild:39: cfg: Namespace(verbose=True, quiet=Fa [too-long-redacted] sable=None, custom_tests=False) D: pybuild __init__:37: cannot initialize 'meson' plugin: Missing command 'meson' D: pybuild tools:232: invoking: /usr/bin/dpkg-architecture D: pybuild debhelper:166: skipping package python-pyopencl-doc (missing ${python3:Depends} in Depends/Recommends) D: pybuild debhelper:174: source=pyopencl, binary packages=['python3-pyopencl'] D: pybuild pybuild:151: detected build system: pyproject (certainty: 99%) I: pybuild plugin_pyproject:129: Building wheel for python3.13 with "build" module I: pybuild base:311: python3.13 -m build --skip-dependency-check --no-isolation --wheel --outdir /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13 D: pybuild tools:232: invoking: python3.13 -m build --skip-dependency-check --no-isolation --wheel --outdir /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13 * Building wheel... *** scikit-build-core 0.11.6 using CMake 3.31.6 (wheel) *** Configuring CMake... loading initial cache file /tmp/tmp26t9gfup/build/CMakeInit.txt Re-run cmake no build system arguments -- The CXX compiler identification is GNU 15.2.0 -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /usr/bin/x86_64-linux-gnu-g++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- CL_INC_DIR not set, trying to guess it from environment variables. -- CL_INC_DIR not set, trying to guess it from conda environment. -- CL_INC_DIR -- CL_LIB_DIR -- CL_LIBNAME CMake Error at /usr/share/cmake-3.31/Modules/FindPackageHandleStandardArgs.cmake:233 (message): Could NOT find Python (missing: Python_NumPy_INCLUDE_DIRS Interpreter Development.Module NumPy) (found version "3.13.7") Call Stack (most recent call first): /usr/share/cmake-3.31/Modules/FindPackageHandleStandardArgs.cmake:603 (_FPHSA_FAILURE_MESSAGE) /usr/share/cmake-3.31/Modules/FindPython.cmake:673 (find_package_handle_standard_args) CMakeLists.txt:133 (find_package) -- Configuring incomplete, errors occurred! *** CMake configuration failed ERROR Backend subprocess exited when trying to invoke build_wheel E: pybuild pybuild:389: build: plugin pyproject failed with: exit code=1: python3.13 -m build --skip-dependency-check --no-isolation --wheel --outdir /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13 Traceback (most recent call last): File "/usr/bin/pybuild", line 387, in main run(func, i, version, c) ~~~^^^^^^^^^^^^^^^^^^^^^ File "/usr/bin/pybuild", line 325, in run result = func(context, args) File "/usr/share/dh-python/dhpython/build/plugin_pyproject.py", line 108, in build self.build_wheel(context, args) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^ File "/usr/share/dh-python/dhpython/build/base.py", line 365, in wrapped_func raise Exception(msg) Exception: exit code=1: python3.13 -m build --skip-dependency-check --no-isolation --wheel --outdir /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13 dh_auto_build: error: pybuild --build -i python{version} -p 3.13 returned exit code 13 make: *** [debian/rules:24: binary] Error 25 dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2 --------------------------------------------------------------------------------
