Package: libmtp-common Version: 1.1.22-1 Severity: important X-Debbugs-Cc: [email protected]
/usr/lib/udev/rules.d/69-libmtp.rules tries to run /usr/lib/udev/mtp-probe, but the package does not depend on libmtp-runtime. However mtp-probe seems to not work, it rejects a Sony Alpha7 in MTP mode: | checking bus 3, device 73: "/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-1" | bus: 3, device: 73 was not an MTP device The device in question is, and before some recent updates it worked fine: | Bus 003 Device 073: ID 054c:0da6 Sony Corp. ILCE-7M4 | Negotiated speed: High Speed (480Mbps) | Device Descriptor: | bLength 18 | bDescriptorType 1 | bcdUSB 2.10 | bDeviceClass 0 [unknown] | bDeviceSubClass 0 [unknown] | bDeviceProtocol 0 | bMaxPacketSize0 64 | idVendor 0x054c Sony Corp. | idProduct 0x0da6 ILCE-7M4 | bcdDevice 2.00 | iManufacturer 1 Sony | iProduct 2 ILCE-7M4 | iSerial 3 XXXXXXXXXXXX | bNumConfigurations 1 | Configuration Descriptor: | bLength 9 | bDescriptorType 2 | wTotalLength 0x0027 | bNumInterfaces 1 | bConfigurationValue 1 | iConfiguration 0 | bmAttributes 0xc0 | Self Powered | MaxPower 0mA | Interface Descriptor: | bLength 9 | bDescriptorType 4 | bInterfaceNumber 0 | bAlternateSetting 0 | bNumEndpoints 3 | bInterfaceClass 6 Imaging | bInterfaceSubClass 1 Still Image Capture | bInterfaceProtocol 1 Picture Transfer Protocol (PIMA 15470) | iInterface 0 | Endpoint Descriptor: | bLength 7 | bDescriptorType 5 | bEndpointAddress 0x81 EP 1 IN | bmAttributes 2 | Transfer Type Bulk | Synch Type None | Usage Type Data | wMaxPacketSize 0x0200 1x 512 bytes | bInterval 0 | Endpoint Descriptor: | bLength 7 | bDescriptorType 5 | bEndpointAddress 0x02 EP 2 OUT | bmAttributes 2 | Transfer Type Bulk | Synch Type None | Usage Type Data | wMaxPacketSize 0x0200 1x 512 bytes | bInterval 0 | Endpoint Descriptor: | bLength 7 | bDescriptorType 5 | bEndpointAddress 0x83 EP 3 IN | bmAttributes 3 | Transfer Type Interrupt | Synch Type None | Usage Type Data | wMaxPacketSize 0x0020 1x 32 bytes | bInterval 7 | Binary Object Store Descriptor: | bLength 5 | bDescriptorType 15 | wTotalLength 0x002a | bNumDeviceCaps 3 | USB 2.0 Extension Device Capability: | bLength 7 | bDescriptorType 16 | bDevCapabilityType 2 | bmAttributes 0x00000006 | BESL Link Power Management (LPM) Supported | SuperSpeed USB Device Capability: | bLength 10 | bDescriptorType 16 | bDevCapabilityType 3 | bmAttributes 0x00 | wSpeedsSupported 0x000e | Device can operate at Full Speed (12Mbps) | Device can operate at High Speed (480Mbps) | Device can operate at SuperSpeed (5Gbps) | bFunctionalitySupport 1 | Lowest fully-functional device speed is Full Speed (12Mbps) | bU1DevExitLat 10 micro seconds | bU2DevExitLat 2047 micro seconds | SuperSpeedPlus USB Device Capability: | bLength 20 | bDescriptorType 16 | bDevCapabilityType 10 | bmAttributes 0x00000001 | Sublink Speed Attribute count 2 | Sublink Speed ID count 1 | wFunctionalitySupport 0x1100 | Min functional Speed Attribute ID: 0 | Min functional RX lanes: 1 | Min functional TX lanes: 1 | bmSublinkSpeedAttr[0] 0x000a4030 | Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus | bmSublinkSpeedAttr[1] 0x000a40b0 | Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus | Device Status: 0x0001 | Self Powered -- System Information: Debian Release: forky/sid APT prefers testing APT policy: (700, 'testing'), (500, 'unstable-debug'), (500, 'stable-updates'), (500, 'oldstable-updates'), (500, 'unstable'), (500, 'stable'), (500, 'oldstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 6.16.5+deb14-amd64 (SMP w/16 CPU threads; PREEMPT) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled -- no debconf information
