Package: src:virt-v2v Version: 2.10.0-5 Severity: serious Tags: ftbfs forky sid
Dear maintainer: During a rebuild of all packages in unstable, this package failed to build. Below you will find the last part of the build log (probably the most relevant part, but not necessarily). If required, the full build log is available here: https://people.debian.org/~sanvila/build-logs/202608/ About the archive rebuild: The build was made on virtual machines from AWS, using sbuild and a reduced chroot with only build-essential packages. If you cannot reproduce the bug please contact me privately, as I am willing to provide ssh access to a virtual machine where the bug is fully reproducible. If this is really a bug in one of the build-depends, please use reassign and add an affects on src:virt-v2v, so that this is still visible in the BTS web page for this package. Thanks. -------------------------------------------------------------------------------- [...] --invariant Use constants for randomly generated or time based values --offset=SECTOR Write the filesystem at a specific sector into the device file. --help Show this help message and exit commandrvf: stdout=y stderr=y flags=0x0 commandrvf: wipefs --help commandrvf: stdout=n stderr=n flags=0x0 commandrvf: wipefs -a --force /dev/sda1 commandrvf: stdout=n stderr=y flags=0x0 commandrvf: mkfs -t vfat -I --mbr=n /dev/sda1 libguestfs: trace: mkfs = 0 libguestfs: trace: part_set_gpt_type "/dev/sda" 1 "21686148-6449-6E6F-744E-656564454649" guestfsd: => mkfs (0x116) took 0.16 secs guestfsd: <= part_set_gpt_type (0x188) request length 96 bytes commandrvf: stdout=n stderr=y flags=0x0 commandrvf: udevadm --debug settle -E /dev/sda Loaded shared library 'libselinux.so.1' via dlopen(). Failed to determine unit we run in, ignoring: No data available varlink: Setting state idle-client udev: Sending message: {"method":"io.systemd.service.Ping"} udev: Changing state idle-client -> calling udev: Received message: {} udev: Changing state calling -> called udev: Changing state called -> idle-client udev: Changing state idle-client -> disconnected commandrvf: stdout=n stderr=y flags=0x0 commandrvf: udevadm --debug settle Loaded shared library 'libselinux.so.1' via dlopen(). Failed to determine unit we run in, ignoring: No data available varlink: Setting state idle-client udev: Sending message: {"method":"io.systemd.service.Ping"} udev: Changing state idle-client -> calling udev: Received message: {} udev: Changing state calling -> called udev: Changing state called -> idle-client udev: Changing state idle-client -> disconnected sfdisk --part-type '/dev/sda' 1 '21686148-6449-6E6F-744E-656564454649' The partition table has been altered. Calling ioctl() to re-read partition table. [ 12.543942] sda: sda1 sda2 Syncing disks. commandrvf: stdout=n stderr=y flags=0x0 commandrvf: udevadm --debug settle Loaded shared library 'libselinux.so.1' via dlopen(). Failed to determine unit we run in, ignoring: No data available varlink: Setting state idle-client udev: Sending message: {"method":"io.systemd.service.Ping"} udev: Changing state idle-client -> calling udev: Received message: {} udev: Changing state calling -> called udev: Changing state called -> idle-client udev: Changing state idle-client -> disconnected libguestfs: trace: part_set_gpt_type = 0 libguestfs: trace: mkfs "ntfs" "/dev/sda2" guestfsd: => part_set_gpt_type (0x188) took 2.07 secs guestfsd: <= mkfs (0x116) request length 84 bytes commandrvf: stdout=n stderr=y flags=0x0 commandrvf: udevadm --debug settle -E /dev/sda2 Loaded shared library 'libselinux.so.1' via dlopen(). Failed to determine unit we run in, ignoring: No data available varlink: Setting state idle-client udev: Sending message: {"method":"io.systemd.service.Ping"} udev: Changing state idle-client -> calling udev: Received message: {} udev: Changing state calling -> called udev: Changing state called -> idle-client udev: Changing state idle-client -> disconnected commandrvf: stdout=n stderr=n flags=0x0 commandrvf: wipefs -a --force /dev/sda2 commandrvf: stdout=n stderr=y flags=0x0 commandrvf: mkfs -t ntfs -Q -F /dev/sda2 libguestfs: trace: mkfs = 0 libguestfs: trace: mount "/dev/sda2" "/" guestfsd: => mkfs (0x116) took 0.20 secs guestfsd: <= mount (0x1) request length 64 bytes commandrvf: stdout=n stderr=y flags=0x0 commandrvf: udevadm --debug settle -E /dev/sda2 Loaded shared library 'libselinux.so.1' via dlopen(). Failed to determine unit we run in, ignoring: No data available varlink: Setting state idle-client udev: Sending message: {"method":"io.systemd.service.Ping"} udev: Changing state idle-client -> calling udev: Received message: {} udev: Changing state calling -> called udev: Changing state called -> idle-client udev: Changing state idle-client -> disconnected command: mount '/dev/sda2' '/sysroot/' command: mount returned 32 command: mount: stderr: mount: /sysroot: unknown filesystem type 'ntfs3'. dmesg(1) may have more information after failed mount system call. ocaml_exn: 'mount' raised 'Failure' exception guestfsd: error: mount exited with status 32: mount: /sysroot: unknown filesystem type 'ntfs3'. dmesg(1) may have more information after failed mount system call. libguestfs: trace: mount = -1 (error) *stdin*:20: libguestfs: error: mount: mount exited with status 32: mount: /sysroot: unknown filesystem type 'ntfs3'. dmesg(1) may have more information after failed mount system call. libguestfs: trace: close libguestfs: closing guestfs handle 0x559870103180 (state 2) libguestfs: trace: internal_autosync guestfsd: => mount (0x1) took 0.15 secs guestfsd: <= internal_autosync (0x11a) request length 40 bytes umount-all: /proc/mounts: fsname=/dev/root dir=/ type=ext2 opts=rw,noatime freq=0 passno=0 umount-all: /proc/mounts: fsname=/proc dir=/proc type=proc opts=rw,relatime freq=0 passno=0 umount-all: /proc/mounts: fsname=/sys dir=/sys type=sysfs opts=rw,relatime freq=0 passno=0 umount-all: /proc/mounts: fsname=/dev dir=/dev type=devtmpfs opts=rw,relatime,size=611848k,nr_inodes=152962,mode=755,inode64 freq=0 passno=0 umount-all: /proc/mounts: fsname=/dev/pts dir=/dev/pts type=devpts opts=rw,relatime,mode=600,ptmxmode=000 freq=0 passno=0 umount-all: /proc/mounts: fsname=shmfs dir=/dev/shm type=tmpfs opts=rw,relatime,inode64 freq=0 passno=0 umount-all: /proc/mounts: fsname=tmpfs dir=/run type=tmpfs opts=rw,nosuid,relatime,size=247976k,mode=755,inode64 freq=0 passno=0 commandrvf: stdout=n stderr=y flags=0x0 commandrvf: udevadm --debug settle -E /dev/sdb Loaded shared library 'libselinux.so.1' via dlopen(). Failed to determine unit we run in, ignoring: No data available varlink: Setting state idle-client udev: Sending message: {"method":"io.systemd.service.Ping"} udev: Changing state idle-client -> calling udev: Received message: {} udev: Changing state calling -> called udev: Changing state called -> idle-client udev: Changing state idle-client -> disconnected commandrvf: stdout=n stderr=y flags=0x0 commandrvf: udevadm --debug settle -E /dev/sda Loaded shared library 'libselinux.so.1' via dlopen(). Failed to determine unit we run in, ignoring: No data available varlink: Setting state idle-client udev: Sending message: {"method":"io.systemd.service.Ping"} udev: Changing state idle-client -> calling udev: Received message: {} udev: Changing state calling -> called udev: Changing state called -> idle-client udev: Changing state idle-client -> disconnected fsync /dev/sda guestfsd: => internal_autosync (0x11a) took 0.06 secs libguestfs: trace: internal_autosync = 0 libguestfs: sending SIGTERM to process 8423 libguestfs: qemu maxrss 465940K libguestfs: command: run: rm libguestfs: command: run: \ -rf /<<PKGBUILDDIR>>/tmp/libguestfsgekFAU libguestfs: command: run: rm libguestfs: command: run: \ -rf /tmp/dh-xdg-rundir-oScEagJh/libguestfsOI2NPy /<<PKGBUILDDIR>>/run: command failed with exit code 1 make[5]: *** [Makefile:997: win10.img] Error 1 make[5]: Leaving directory '/<<PKGBUILDDIR>>/test-data/phony-guests' make[4]: *** [Makefile:771: check-am] Error 2 make[4]: Leaving directory '/<<PKGBUILDDIR>>/test-data/phony-guests' make[3]: *** [Makefile:585: check-recursive] Error 1 make[3]: Leaving directory '/<<PKGBUILDDIR>>/test-data' make[2]: *** [Makefile:877: check-recursive] Error 1 make[2]: Leaving directory '/<<PKGBUILDDIR>>' dh_auto_test: error: make -j2 check TESTSUITEFLAGS="-j2 --verbose" VERBOSE=1 returned exit code 2 make[1]: *** [debian/rules:39: override_dh_auto_test] Error 25 make[1]: Leaving directory '/<<PKGBUILDDIR>>' make: *** [debian/rules:4: binary] Error 2 dpkg-buildpackage: error: debian/rules binary subprocess failed with exit status 2 --------------------------------------------------------------------------------
