Package: src:linux
Version: 6.1.192-1
Severity: normal

Dear Maintainer,

I've upgrade two Radxa ROCK 4C+ ARM64 boards to the
linux-image-6.1.0-55-arm64 kernel package and noticed that the machines
don't successfully boot anymore. I only took a closer look at one of
them: It starts to boot as usual, but I guess once it tries to bring up
the network, it crashes with a panic.  See the log from a serial console
below. Downgrading to linux-image-6.1.0-54-arm64 makes it boot again.

I guess this is a different issue than the ext4/folio one me and others
also ran into with that Kernel version ([1] et al.) as this seems to
happen in a network driver (stmmac I assume).

Regards and thanks,
Manfred

[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1154101

-- Package-specific info:
** Kernel log:

Starting kernel ...
 
[    4.374308] dw-apb-uart ff180000.serial: Failed to create device link 
(0x180) with 0-0020
[    4.844287] dw-apb-uart ff180000.serial: Failed to create device link 
(0x180) with 0-0020
/dev/mmcblk0p2: recovering journal
/dev/mmcblk0p2: clean, 71267/1954064 files, 2472272/7812352 blocks
[   15.192694] brcmfmac mmc2:0001:1: firmware: failed to load 
brcm/brcmfmac43455-sdio.radxa,rock-4c-plus.bin (-2)
[   15.193645] firmware_class: See https://wiki.debian.org/Firmware for 
information about missing firmware
[   15.197910] brcmfmac mmc2:0001:1: firmware: failed to load 
brcm/brcmfmac43455-sdio.radxa,rock-4c-plus.bin (-2)
[   15.473219] brcmfmac mmc2:0001:1: firmware: failed to load 
brcm/brcmfmac43455-sdio.radxa,rock-4c-plus.txt (-2)
[   15.481922] brcmfmac mmc2:0001:1: firmware: failed to load 
brcm/brcmfmac43455-sdio.radxa,rock-4c-plus.txt (-2)
[   15.483064] brcmfmac mmc2:0001:1: firmware: failed to load 
brcm/brcmfmac43455-sdio.txt (-2)
[   15.483955] brcmfmac mmc2:0001:1: firmware: failed to load 
brcm/brcmfmac43455-sdio.txt (-2)
[   16.491463] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 
0x50
[   16.502395] bluetooth hci0: firmware: failed to load 
brcm/BCM4345C0.radxa,rock-4c-plus.hcd (-2)
[   16.503336] bluetooth hci0: firmware: failed to load 
brcm/BCM4345C0.radxa,rock-4c-plus.hcd (-2)
[   32.164341] Unable to handle kernel paging request at virtual address 
ffff8000edefe000
[   32.165121] Mem abort info:
[   32.165390]   ESR = 0x0000000096000005
[   32.165746]   EC = 0x25: DABT (current EL), IL = 32 bits
[   32.166243]   SET = 0, FnV = 0
[   32.166537]   EA = 0, S1PTW = 0
[   32.166837]   FSC = 0x05: level 1 translation fault
[   32.167293] Data abort info:
[   32.167568]   ISV = 0, ISS = 0x00000005
[   32.167929]   CM = 0, WnR = 0
[   32.168215] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000003858000
[   32.168836] [ffff8000edefe000] pgd=10000000f7fff003, p4d=10000000f7fff003, 
pud=0000000000000000
[   32.169662] Internal error: Oops: 0000000096000005 [#1] SMP
[   32.170185] Modules linked in: 8021q garp mrp algif_hash algif_skcipher 
af_alg bnep bridge stp llc binfmt_misc hci_uart btqca btrtl btbcm btsdio 
btintel bluetooth sha3_generic jitterentropy_rng sha512_generic sha512_arm64 
rockchip_vdec(C) hantro_vpu snd_soc_simple_card brcmfmac snd_soc_hdmi_codec 
snd_soc_rk817 snd_
soc_rockchip_i2s snd_soc_simple_card_utils aes_neon_bs v4l2_vp9 rockchip_rga 
brcmutil aes_neon_blk v4l2_h264 snd_soc_core aes_ce_blk cfg80211 
videobuf2_dma_contig polyval_ce polyval_generic snd_pcm_dmaengine v4l2_mem2mem 
videobuf2_dma_sg aes_ce_cipher ghash_ce panfrost snd_pcm videobuf2_memops drbg 
gf128mul videobuf2_
v4l2 snd_timer sha2_ce ansi_cprng governor_simpleondemand videobuf2_common snd 
sha256_arm64 rockchip_saradc gpu_sched videodev ecdh_generic dw_hdmi_i2s_audio 
dw_hdmi_cec sha1_ce evdev soundcore rfkill drm_shmem_helper mc 
industrialio_triggered_buffer kfifo_buf ecc rk817_charger leds_gpio dw_wdt 
nvmem_rockchip_efuse in
dustrialio rk805_pwrkey cpufreq_dt dm_mod fuse
[   32.170973]  loop dax efi_pstore configfs ip_tables x_tables autofs4 ext4 
crc16 mbcache jbd2 crc32c_generic xhci_plat_hcd xhci_hcd realtek 
rk808_regulator dwc3 udc_core rockchipdrm roles dwmac_rk ulpi stmmac_platform 
dw_hdmi stmmac cec rc_core fan53555 pcs_xpcs dw_mipi_dsi analogix_dp 
dwc3_of_simple crct10dif_ce cr
ct10dif_common fixed phylink phy_rockchip_inno_usb2 drm_display_helper 
phy_rockchip_emmc of_mdio dw_mmc_rockchip ohci_platform io_domain 
phy_rockchip_typec ohci_hcd ehci_platform sdhci_of_arasan sdhci_pltfm 
drm_dma_helper fixed_phy fwnode_mdio dw_mmc_pltfm pl330 drm_kms_helper i2c_rk3x 
libphy ehci_hcd cqhci usbcore dr
m dw_mmc sdhci usb_common
[   32.184369] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G         C         
6.1.0-55-arm64 #1  Debian 6.1.192-1
[   32.185260] Hardware name: Radxa ROCK 4C+ (DT)
[   32.185677] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   32.186326] pc : dwmac_dma_interrupt+0x15c/0x260 [stmmac]
[   32.186922] lr : stmmac_napi_check+0x58/0x290 [stmmac]
[   32.187481] sp : ffff800008003e10
[   32.187796] x29: ffff800008003e10 x28: ffff800009cc8dc0 x27: 00000000f3f1e804
[   32.188478] x26: ffff800009804008 x25: ffff0000f0c2b400 x24: ffff800009804008
[   32.189158] x23: 0000000000000001 x22: 0000000000000001 x21: 0000000000010444
[   32.189837] x20: ffff80000a6d1014 x19: 0000000000000000 x18: 0000000000000000
[   32.190516] x17: ffff8000edefe000 x16: ffff800008000000 x15: 0000000000000000
[   32.191197] x14: ffff800009cc8dc0 x13: ffff8000edefe000 x12: 0000000034d4d91d
[   32.191877] x11: 0000000000000040 x10: ffff000000520d70 x9 : ffff800000ffe4b8
[   32.192557] x8 : ffff000000801020 x7 : 0000000000000000 x6 : 0000000000000000
[   32.193236] x5 : 0000000000670444 x4 : 0000000000000000 x3 : 0000000000000000
[   32.193914] x2 : ffff000004a34600 x1 : ffff8000edefe000 x0 : ffff8000edefe000
[   32.194596] Call trace:
[   32.194836]  dwmac_dma_interrupt+0x15c/0x260 [stmmac]
[   32.195392]  stmmac_napi_check+0x58/0x290 [stmmac]
[   32.195920]  stmmac_interrupt+0xc4/0x160 [stmmac]
[   32.196443]  __handle_irq_event_percpu+0x60/0x1e0
[   32.196899]  handle_irq_event+0x50/0x120
[   32.197281]  handle_fasteoi_irq+0xc4/0x210
[   32.197684]  handle_irq_desc+0x48/0x60
[   32.198060]  generic_handle_domain_irq+0x24/0x30
[   32.198512]  gic_handle_irq+0x58/0x13c
[   32.198878]  call_on_irq_stack+0x30/0x48
[   32.199264]  do_interrupt_handler+0x88/0x90
[   32.199675]  el1_interrupt+0x34/0x54
[   32.200034]  el1h_64_irq_handler+0x18/0x2c
[   32.200437]  el1h_64_irq+0x64/0x68
[   32.200772]  cpuidle_enter_state+0xbc/0x440
[   32.201188]  cpuidle_enter+0x40/0x60
[   32.201547]  call_cpuidle+0x28/0x44
[   32.201892]  do_idle+0x24c/0x310
[   32.202212]  cpu_startup_entry+0x40/0x4c
[   32.202596]  rest_init+0xdc/0xe0
[   32.202926]  arch_post_acpi_subsys_init+0x0/0x28
[   32.203373]  start_kernel+0x738/0x75c
[   32.203733]  __primary_switched+0xbc/0xc4
[   32.204134] Code: 35ffffa3 321d0273 17ffffdb f9800031 (c85f7c24) 
[   32.204704] ---[ end trace 0000000000000000 ]---
[   32.205140] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[   32.205771] SMP: stopping secondary CPUs
[   32.206324] Kernel Offset: disabled
[   32.206654] CPU features: 0x020000,2082c084,0000421b
[   32.207121] Memory Limit: none
[   32.207422] ---[ end Kernel panic - not syncing: Oops: Fatal exception in 
interrupt ]---

** Model information
Device Tree model: Radxa ROCK 4C+

** Network interface configuration:
*** /etc/network/interfaces:

auto lo
iface lo inet loopback

source-directory interfaces.d

*** /etc/network/interfaces.d/br0:
auto br0

iface br0 inet dhcp
    bridge_ports end0
    bridge_fd 9
    bridge_hello 2
    bridge_maxage 12
    bridge_maxwait 5
    bridge_stp off
    bridge_hw ce:62:f5:xx:xx:xx

iface br0 inet6 auto
    privext 2

** PCI devices:

** USB devices:
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
## Note: This is after a downgrade/booting the old kernel,
##       6.1.0-55-arm64 crashes before I even get a login prompt.

Debian Release: 12.15
  APT prefers oldstable-updates
  APT policy: (500, 'oldstable-updates'), (500, 'oldstable-security'), (500, 
'oldstable')
Architecture: arm64 (aarch64)

Kernel: Linux 6.1.0-54-arm64 (SMP w/6 CPU threads) 
Kernel taint flags: TAINT_CRAP
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.1.0-55-arm64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.142+deb12u3
ii  kmod                                    30+20221128-1
ii  linux-base                              4.12.1~deb12u1

Versions of packages linux-image-6.1.0-55-arm64 recommends:
ii  apparmor             3.0.8-3
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-6.1.0-55-arm64 suggests:
pn  debian-kernel-handbook  <none>
pn  linux-doc-6.1           <none>

Versions of packages linux-image-6.1.0-55-arm64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
ii  firmware-brcm80211        20230210-5
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

Reply via email to