On Wednesday 23 August 2006 20:04, Rui Pedro Lopes wrote: > Package: wpasupplicant > Version: 0.5.4-5 > Severity: normal > > Hi, > > For some time now I've been unable to use wpasupplicant with IEEE802.1x. I > tried it with both ipw2100 and ipw2200 boards and it allways complaints > about "Failing to set encryption" and: ioctl[IPW_IOCTL_WPA_SUPPLICANT]: > Operation not supported > > A small part of the log is the following: > State: SCANNING -> ASSOCIATED > WEXT: Operstate: linkmode=-1, operstate=5 > Associated to a new BSS: BSSID=00:0f:24:7a:bf:c0 > No keys have been configured - skip key clearing > Associated with 00:0f:24:7a:bf:c0 > WPA: Association event - clear replay counter > EAPOL: External notification - portEnabled=0 > EAPOL: External notification - portValid=0 > EAPOL: External notification - portEnabled=1 > EAPOL: SUPP_PAE entering state CONNECTING > EAPOL: SUPP_BE entering state IDLE > EAP: EAP entering state INITIALIZE > EAP: EAP entering state IDLE > Setting authentication timeout: 10 sec 0 usec > RX EAPOL from 00:0f:24:7a:bf:c0 > RX EAPOL - hexdump(len=46): 01 00 00 28 01 01 00 28 01 00 6e 65 74 77 6f 72 > 6b 69 64 3d 65 2d 55 2c 6e 61 73 69 64 3d 61 70 31 36 30 2c 70 6f 72 74 69 > 64 3d 30 00 00 Setting authentication timeout: 70 sec 0 usec > EAPOL: Received EAP-Packet frame > EAPOL: SUPP_PAE entering state RESTART > EAP: EAP entering state INITIALIZE > EAP: EAP entering state IDLE > EAPOL: SUPP_PAE entering state AUTHENTICATING > EAPOL: SUPP_BE entering state REQUEST > EAPOL: getSuppRsp > EAP: EAP entering state RECEIVED > EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0 > EAP: EAP entering state IDENTITY > CTRL-EVENT-EAP-STARTED EAP authentication started > EAP: EAP-Request Identity data - hexdump_ascii(len=35): > 00 6e 65 74 77 6f 72 6b 69 64 3d 65 2d 55 2c 6e _networkid=e-U,n > 61 73 69 64 3d 61 70 31 36 30 2c 70 6f 72 74 69 asid=ap160,porti > 64 3d 30 d=0 > EAP: using anonymous identity - hexdump_ascii(len=13): > 72 6c 6f 70 65 73 40 69 70 62 2e 70 74 [EMAIL PROTECTED] > EAP: EAP entering state SEND_RESPONSE > EAP: EAP entering state IDLE > EAPOL: SUPP_BE entering state RESPONSE > EAPOL: txSuppRsp > TX EAPOL - hexdump(len=22): 01 00 00 12 02 01 00 12 01 72 6c 6f 70 65 73 40 > 69 70 62 2e 70 74 EAPOL: SUPP_BE entering state RECEIVE > RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added > Scan timeout - try to get results > Received 531 bytes of scan results (3 BSSes) > Scan results: 3 > Selecting BSS from priority group 0 > 0: 00:0f:24:7a:c9:90 ssid='e-U' wpa_ie_len=0 rsn_ie_len=0 caps=0x11 > skip - no WPA/RSN IE > 1: 00:0f:24:7a:bf:c0 ssid='e-U' wpa_ie_len=0 rsn_ie_len=0 caps=0x11 > skip - blacklisted > 2: 00:0f:24:7a:bf:c0 ssid='guest-e-U' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 > skip - blacklisted > selected non-WPA AP 00:0f:24:7a:c9:90 ssid='e-U' > Trying to associate with 00:0f:24:7a:c9:90 (SSID='e-U' freq=0 MHz) > Cancelling scan request > WPA: clearing own WPA/RSN IE > Automatic auth_alg selection: 0x1 > wpa_driver_ipw_set_auth_alg: auth_alg=0x1 > WPA: clearing AP WPA IE > WPA: clearing AP RSN IE > WPA: clearing own WPA/RSN IE > No keys have been configured - skip key clearing > wpa_driver_ipw_set_drop_unencrypted: enabled=1 > State: ASSOCIATED -> ASSOCIATING > WEXT: Operstate: linkmode=-1, operstate=5 > Setting authentication timeout: 10 sec 0 usec > EAPOL: External notification - portControl=Auto > Wireless event: cmd=0x8b1a len=12 > Wireless event: cmd=0x8b15 len=20 > Wireless event: new AP: 00:00:00:00:00:00 > Added BSSID 00:0f:24:7a:c9:90 into blacklist > State: ASSOCIATING -> DISCONNECTED > WEXT: Operstate: linkmode=-1, operstate=5 > EAPOL: External notification - portEnabled=0 > EAPOL: SUPP_PAE entering state DISCONNECTED > EAPOL: SUPP_BE entering state INITIALIZE > EAP: EAP entering state DISABLED > EAPOL: External notification - portValid=0 > CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys > wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0 > Failed to set encryption. > wpa_driver_ipw_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0 > Failed to set encryption. > wpa_driver_ipw_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0 > Failed to set encryption. > wpa_driver_ipw_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0 > Failed to set encryption. > wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0 > Failed to set encryption. > > > I'm launching wpasupplicant as: > # wpa_supplicant -c /tmp/wpa_supplicant.conf -i eth1 -dd -D ipw > > Any ideia? >
Use -D wext, *not* -D ipw. Thanks, Kel. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
