Package: ndiswrapper
Severity: normal
Hello,
I had ndiwrapper with debian, used firmware from vendor cederom.
Compiles ndiswrapper for my kernel with module-assisstant get build
install.
Installed firmware from cederom, which copied it to
/etc/xxxx/ndiswrapper/xxx/*
Module is launched giving a wlan0 interface.
The USB stick light is green.
However ifconfig report that ping or dhcp send packets (TX), but with
many tries, no way to make received packets(RX) strictly greater than
zero.
might be a bug in ndiswrapper?
Can I check something?
Note: my USB PEABIRD-WLG stick is the 0457:0163
lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 007: ID 0457:0163 Silicon Integrated Systems Corp.
Bus 001 Device 006: ID 1110:9021 Analog Devices Canada, Ltd (Allied
Telesyn)
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 005: ID 0f62:1001 Acrox Technologies Co., Ltd
Bus 001 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet]
----
j'ai sous la main, une imprimante «hp deskjet 6840», et une clef USB
«peabird wlg».
Comment configurer le réseau IP, en mode «Ad hoc»?
*** imprimante:
802.11 -> Configuration IP(v4) -> manuelle:
IP:192.168.13.141
masque:255.255.255.0
passerelle: ....
802.11 -> avancé -> activé:
SSID: JM
ad hoc (plutot que infrastructure)
canal:6
Pas d'authentification ni de codage
index 1
a priori en 802.11G (compatibilité 802.11B décochée)
*** linux debian:
2.6.16-2-686 #1 Sat Jul 15 21:59:21 UTC 2006 i686 GNU/Linux
network-admin donne:
ESSID: JM
WEP: hexadécimal
clé WEP:
IP(v4): 192.168.13.5
masque:255.255.255.0
réseau:
wlan0 Lien encap:Ethernet HWaddr 00:40:F4:F2:A3:E5
inet adr:192.168.13.5 Bcast:192.168.13.255
Masque:255.255.255.0
adr inet6: fe80::240:f4ff:fef2:a3e5/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:43 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 b) TX bytes:2398 (2.3 KiB)
:~# route
Table de routage IP du noyau
Destination Passerelle Genmask Indic Metric Ref Use
Iface
FAI * 255.255.255.255 UH ....
192.168.13.0 * 255.255.255.0 U 0 0 0
wlan0
169.254.0.0 * 255.255.0.0 U 0 0 0
eth0
169.254.0.0 * 255.255.0.0 U 0 0 0
eth0
default * 0.0.0.0 U 0 0 0
ppp0
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-686
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
