Patch attached ...
Index: debian/nobootloader.templates =================================================================== --- debian/nobootloader.templates (revision 40806) +++ debian/nobootloader.templates (working copy) @@ -7,10 +7,10 @@ Type: note #flag:translate!:3,6 _Description: Setting firmware variables for automatic boot - Some variables need to be set in the Pegasos OpenFirmware in order for - your system to boot linux automatically. At the end of the installation, - the system will reboot. At the Pegasos OpenFirmware prompt, set the - following OpenFirmware variables to enable auto-booting: + Some variables need to be set in the Genesi firmware in order for your + system to boot automatically. At the end of the installation, the + system will reboot. At the firmware prompt, set the following + firmware variables to enable auto-booting: . setenv boot-device ${OF_BOOT_DEVICE} setenv boot-file ${OF_BOOT_FILE} @@ -18,13 +18,14 @@ setenv auto-boot? true . You will only need to do this once. Afterwards, enter the "boot" command - or reboot the system to proceed to the next installation stage. + or reboot the system to proceed to your newly installed Debian GNU/Linux + system. . Alternatively, you will be able to boot the kernel manually by entering : . ${KERNEL_BOOT} . - at the OpenFirmware prompt. + at the firmware prompt. Template: nobootloader/confirmation_arm_netwinder_nettrom Type: note @@ -45,7 +46,8 @@ save-all . You will only need to do this once. Afterwards, enter the "boot" command - or reboot the system to proceed to the next installation stage. + or reboot the system to proceed to your newly installed Debian GNU/Linux + system. Template: nobootloader/confirmation_common Type: note