Package: dosemu Version: 1.2.2-5 Severity: important
Two keys are mapped to other keys while working under X. Namely, 'r' is mapped to 't' and 'i' is mapped to '.'. This makes the letters completely unusable inside xdosemu. The culprit may be in the keycode->keynum mapping. The relevant part of 'debug +X' is: X: focus in X: KeymapNotify event X: CapsLockMask = 0x2 X: CapsLockKeycode = 0x42 X: NumLockMask = 0x10 X: NumLockKeycode = 0x4d X: ScrollLockMask = 0x0 X: ScrollLockKeycode = 0x4e X: AltMask = 0x8 X: AltGrMask = 0x80 X: InsLockMask = 0x0 X: No keyboard Description! mapping keycode:9 -> keynum: 0x01 mapping keycode:10 -> keynum: 0x02 mapping keycode:11 -> keynum: 0x03 mapping keycode:12 -> keynum: 0x04 mapping keycode:13 -> keynum: 0x05 mapping keycode:14 -> keynum: 0x06 mapping keycode:15 -> keynum: 0x07 mapping keycode:16 -> keynum: 0x08 mapping keycode:17 -> keynum: 0x09 mapping keycode:18 -> keynum: 0x0a mapping keycode:19 -> keynum: 0x0b mapping keycode:20 -> keynum: 0x0c mapping keycode:21 -> keynum: 0x0d mapping keycode:22 -> keynum: 0x0e mapping keycode:23 -> keynum: 0x0f mapping keycode:24 -> keynum: 0x10 mapping keycode:25 -> keynum: 0x11 mapping keycode:26 -> keynum: 0x12 mapping keycode:27 -> keynum: 0x14 mapping keycode:28 -> keynum: 0x14 mapping keycode:29 -> keynum: 0x15 mapping keycode:30 -> keynum: 0x16 mapping keycode:31 -> keynum: 0x34 . . [cut out some lines] . mapping keycode:60 -> keynum: 0x34 Check the lines with keycodes 27:28 and 31:60; you'll see they are translated to the same keynum. How can I fix this mapping? It broke not more than a month ago. Regards, Piotr Sulecki. -- Package-specific info: ############################################################################## # This file is the system-wide dosemu.conf or the per-user ~/.dosemurc, # included by global.conf or dosemu.bin. # # ./doc/README.txt (chapter 2.) contains a description of the syntax # and the usage of dosemu.conf and .dosemurc. # # The commented-out values are defaults, here for documentation purposes # only. Options marked [priv] cannot be changed in ~/.dosemurc. # # (optional) access rights are defined in # # /etc/dosemu/dosemu.users or /etc/dosemu.users # ############################################################################## # Notes for editing this file: # # In $_xxx = (n) n is a numerical or boolean value # = = # In $_zzz = "s" s is a string # # Please note that all options are commented out by default! # Remove the # in front of the $ to change an option. ############################################################################## ## CPU settings: define the CPU features to DOSEMU. # CPU shown to DOS, valid values: "80[345]86" # or "emulated" for non-native CPU (386 in this case) Default: 80386 $_cpu = "80486" # if possible use Pentium cycle counter. Default: off # $_rdtsc = (off) # CPU speed, used in conjunction with the TSC # Default 0 = calibrated by dosemu, else given (e.g.166.666) # $_cpuspeed = (0) # emulated FPU, (off) or (on), default = (on) # $_mathco = (on) # 0 = all CPU power to DOSEMU; default = 1 = nicest, then higher:more CPU power # $_hogthreshold = (1) ############################################################################## ## Disk and file system settings # List of hdimages or boot directories under # ~/.dosemu, the system config directory (/etc/dosemu by default), or # syshdimagedir (/var/lib/dosemu by default) assigned in this order # such as "hdimage_c directory_d hdimage_e" # Absolute pathnames are also allowed. # If the name begins with '/dev/', then partion access is done instead of # virtual hdimage such as "/dev/hda1" or "/dev/hda1:ro" for readonly # Currently mounted devices and swap are refused. Hdimages and devices may # be mixed such as "hdimage_c /dev/hda1 /dev/hda3:ro" # Note: 'wholedisk' is _not_ supported. Default: "drives/*" $_hdimage = "freedos:ro freedos.img incoming /cdrom" # if you want to boot from a virtual floppy: # file name of the floppy image under DOSEMU_LIB_DIR # e.g. "floppyimage" disables $_hdimage # "floppyimage +hd" does _not_ disable $_hdimage. Default: "" # $_vbootfloppy = "" # floppy drive types: "threeinch" or "fiveinch" or "atapi" or empty, # if non-existant. Optionally the device may be appended such as # "threeinch:/dev/fd0". Default: "threeinch" for A:, "" for B: # $_floppy_a = "threeinch" # $_floppy_b = "" # list of generic SCSI devices to make available for the builtin aspi driver # (format of an entry is 'device:type:mappedtarget' such as # "sg2:WORM sg3:Sequential-Access:6 sg4:CD-ROM" or # "sg2:4 sg3:1:6 sg4:5" (which are equal). Default: "" # $_aspi = "" # whether to lock the full file on lredired drives for file locking requests # or just one byte # $_full_file_locks = (off) # config.sys -> config.XXX; default="" or 3 char., # $_emusys = "" # system.ini -> system.XXX; default="" or 3 char., (for Windows 3.x) # $_emuini = "" ############################################################################## ## Memory settings # conventional DOS memory size, in Kbyte, <= 768. Default = 640 # $_dosmem = (640) # XMS (extended memory) size in Kbyte; default: 8192. $_xms = (16384) # EMS (expanded memory) size in Kbyte; default: 2048. $_ems = (8192) # DOS segment where the EMS frame is put. Default = 0xe000. # $_ems_frame = (0xe000) # DPMI size in Kbyte; default: 0x5000 # $_dpmi = (0x5000) # preferred mapping driver, one of: auto, mapself, mapfile, mapshm # Default: ""="auto" # $_mapping= "" ############################################################################## ## Debug settings # debug switches; same format as -D commandline option, default: ""="-a+cw". # (but without the -D in front), normally written to ~/.dosemu/boot.log # $_debug = "-a+cw" ############################################################################## ## Dosemu-specific hacks # set this to some positive value (eg. Default: 10) # if you want to play Doom or Duke3D with sound. # $_cli_timeout = (10) # try setting this to some lower positive value (eg. 5; default: 50) # if you get problems with some DOS program # freezing after some time. # $_pic_watchdog = (50) # list of temporary hacks, see release notes in the file ChangeLog. # e.g "0:1 2:0", which means to set feature_0 to 1 and feature_2 to 0. # Default: "" # $_features= "" ############################################################################## ## Terminal related settings # Global code page and character set selection. # default: "" == automatic, else: ibm, latin, latin1, latin2, koi8r # $_term_char_set = "" # Character set used externally to dosemu # Default: "" == use $_term_char_set one of else: # "cp437", "cp737", "cp773", "cp775", "cp850", "cp852", "cp857", "cp860", # "cp861", "cp862", "cp863", "cp864", "cp865", "cp866", "cp869", "cp874", # "cp895", "cp1125", "cp1251", "bg-mik" # "iso8859-1", "iso8859-2", "iso8859-3", "iso8859-4", "iso8859-5", "iso8859-6", # "iso8859-7", "iso8859-8", "iso8859_9", "iso8859-14", "iso8859-15", "koi8-r" # "koi8-u", "koi8-ru" # $_external_char_set = "" # Character set used by dos programs # Default: "" == use $_term_char_set one of else: # "cp437", "cp737", "cp773", "cp775", "cp850", "cp852", "cp857", "cp860", # "cp861", "cp862", "cp863", "cp864", "cp865", "cp866", "cp869", "cp874", # "cp895", "cp1125", "cp1251", "bg-mik" # $_internal_char_set = "" # terminal with color support. Default: (on) # $_term_color = (on) # time between refreshes (units: 20 == 1 second). Default: 4 # $_term_updfreq = (4) # xterm, putty and compatibles window title. Default: %s - DOSEMU # where %s is the DOS program's name. Use "" to not change the title # $_xterm_title = "%s - DOSEMU" # Video adapter style used: one of: vga, ega, mda, mga, cga, none # Default: "vga"; none=dumb terminal mode. # $_video = "vga" ############################################################################## ## Keyboard related settings # Keyboard layout: default: 'auto' (which tries to generate the table from # the current Linux console settings) # or one of: finnish(-latin1), de(-latin1), be, it, us, uk, dk(-latin1), # keyb-no, no-latin1, dvorak, pl, po, sg(-latin1), fr(-latin1), sf(-latin1), # es(-latin1), sw, hu(-latin2), hu-cwi, keyb-user, hr-cp852, hr-latin2, # cz-qwerty, cz-qwertz, ru, tr. $_layout = "us" # bypass normal keyboard input on the Linux console, maybe dangerous # $_rawkeyboard = (0) # 30 == Ctrl-^ (Ctrl-6 on US keyboards), special-sequence prefix for terminals # use Ctrl-^ h for help # $_escchar = (30) ############################################################################## ## Mouse settings # Use internal mouse driver. Default = (on). # $_mouse_internal = (on) ## all other mouse settings: console only (ignored for remote/xterm/xdosemu) # type: one of microsoft, mousesystems, logitech, mmseries, mouseman, hitachi, # busmouse, ps2, imps2. Default: "" (no mouse or serial mouse via DOS driver) # $_mouse = "" # Mouse device: one of: com1, com2, com3, com4 (for DOS serial mouse driver # -- overrides $_mouse_internal) # or /dev/mouse (for the DOSEMU internal mouse driver). Default: "" # $_mouse_dev = "" # Default: "" or one or more of: "emulate3buttons cleardtr" # $_mouse_flags = "" # baudrate, default: 0 == don't set # $_mouse_baud = (0) ############################################################################## ## Joystick config # 1st and 2nd joystick device # e.g. "/dev/js0" or default: "/dev/js0 /dev/js1" # (or "" if you don't want joystick support) # $_joy_device = "/dev/js0 /dev/js1" # range for joystick axis readings, must be > 0, default: 1 # $_joy_dos_min = (1) # avoid setting the maximum to > 250, default: 150 # $_joy_dos_max = (150) # the higher, the less sensitive - useful if you have a wobbly joystick. # default: 1 # $_joy_granularity = (1) # delay between nonblocking linux joystick reads increases performance if >0 # and processor>=Pentium recommended: 1-50ms or 0 if unsure. default: 1 # $_joy_latency = (1) ############################################################################## ## Serial port settings # use e.g. "/dev/mouse", "/dev/ttyS0", "/dev/ttyS1", ... # Note: all "/dev/ttyXX" may be suffixed by the IRQ # used (instead of the default one), such as "/dev/ttyS2 irq 5" # or "/dev/ttyS3 irq 9". Default: "" # $_com1 = "" # $_com2 = "" # $_com3 = "" # $_com4 = "" # Lock directory (e.g. default: "/var/lock") # $_ttylocks = "/var/lock" ############################################################################## ## Printer settings # list of (/etc/printcap) printer names to appear as LPT1, LPT2, LPT3 # (not all are needed, empty for none). Default: "lp" # use "" if you want the printer_command (below) free-form (LPT1 only) # $_printer = "lp" # Print command to use. Default: "lpr", for "lpr -P printername". # Sometimes (with CUPS) "lpr -l" is necessary. # $_printer_command = "lpr" # idle time in seconds before spooling out. Default: (20) # $_printer_timeout = (20) ############################################################################## ## Speaker and sound settings # speaker: default: "emulated", or "native" (console only) or "" (off) $_speaker = "emulated" # sound support on/off $_sound = (on) # (emulated!) Sound Blaster base i/o port, default: (0x220) # $_sb_base = (0x220) # Sound Blaster IRQ setting, default: (5) # $_sb_irq = (5) # Sound Blaster 8 bit DMA setting, default: (1) # $_sb_dma = (1) # Sound Blaster 16 bit DMA setting, default: (5) # $_sb_hdma = (5) # Sound device, default: "/dev/dsp" # $_sb_dsp = "/dev/dsp" # Sound mixer device, default: ""; use "/dev/mixer" if you allow that dosemu # changes the volume # $_sb_mixer = "" # Midi base i/o port # $_mpu_base = (0x330) # The following options are driver-specific and it is not necessary to alter # the default values in most cases. Read sound-usage.txt for more. # Defaults: min_frags: 4, max_frags: 0x20, stalled_frags: 1, do_post: off, # min_extra_frags: 2. # $_oss_min_frags = (4) # $_oss_max_frags = (0x20) # $_oss_stalled_frags = (1) # $_oss_do_post = (off) # $_oss_min_extra_frags = (2) ############################################################################## ## Network settings # NOTE: Network/packet driver support needs root privileges (except for # TUN/TAP) # 'on' for Packet Driver. Default: off # $_pktdriver = (off) # use Novell specific hack. Default: off # $_novell_hack = (off) # network device for Packet Driver; default: "eth0" # $_netdev = "eth0" # packet driver type "dosnet" for dosnet, default: "tap" for TUN/TAP # ($_vnet setting overrides $_netdev) # $_vnet = "tap" # NOTE: IPX needs root privileges unless you setup /proc/net/ipx_route # in advance. DPMI support for IPX is broken. Default: (off) # $_ipxsupport = (off) ############################################################################## ## Setting specific to the X Window System (xdosemu, dosemu -X) # time between refreshes (units: 20 == 1 second). Default: 5 $_X_updfreq = (2) # Title in the top bar of the window. Default = "DOS in a BOX" # $_X_title = "DOS in a BOX" # Text for icon, when minimized. Default = "xdosemu" # $_X_icon_name = "xdosemu" # Start DOSEMU in fullscreen mode. Default = "off" # $_X_fullscreen = (off) # on==translate keyboard via dosemu keytables, or 'off' or 'auto'. Default:auto # $_X_keycode = (auto) # blink rate for the cursor # $_X_blinkrate = (12) # name of the X font that is used (e.g. "vga") default = "" (bitmap fonts) # $_X_font = "" # Use shared memory extensions. Faster, but problematic with remote X. # Default: on # $_X_mitshm = (on) # share the colormap with other applications. Default: off # $_X_sharecmap = (off) # Set fixed aspect for resizing the graphics window. Default: on # $_X_fixed_aspect = (on) # Always use an aspect ratio of 4:3 for graphics. Default: on # $_X_aspect_43 = (on) # Use linear filtering for >15 bpp interpolation. Default: off # $_X_lin_filt = (off) # Use bi-linear filtering for >15 bpp interpolation. Default: off # $_X_bilin_filt = (off) # initial size factor for video mode 0x13 (320x200) # $_X_mode13fact = (2) # "x,y" of initial windows size (defaults to ""=float) # $_X_winsize = "" # gamma correction. Default: 1.0 # $_X_gamma = (1.0) # size (in Kbytes) of the frame buffer for emulated vga. Default: 1024K $_X_vgaemu_memsize = (2048) # use linear frame buffer in VESA modes. Default: on # $_X_lfb = (on) # use protected mode interface for VESA modes. Default: on # $_X_pm_interface = (on) # KeySym name to activate mouse grab, ""=off. Default: "Home" (ctrl+alt+home) # $_X_mgrab_key = "Home" # List of vesamodes to add. The list has to contain SPACE separated # "xres,yres" pairs, as follows: "xres,yres ... xres,yres". Default: "" # $_X_vesamode = "" # pause xdosemu if it loses focus $_X_background_pause = (on) ############################################################################## ## Direct hardware access # NOTE: the settings below here that are marked [priv] are only valid in # a system-wide dosemu.conf and cannot be changed by ~/.dosemurc. # For these settings to take effect, DOSEMU must be run with root privileges; # either run it as root or sudo/suid with adjustments in dosemu.users. # [priv] list of portnumbers such as "0x1ce 0x1cf 0x238" or # "0x1ce range 0x280,0x29f 310" or "range 0x1a0,(0x1a0+15)". Default: "" # All ports are slow and can be logged by default. However ports < 0x400 # can be set as "fast" too: example (with multiple lines) # $_ports = "device /dev/null fast 0x200" # $_ports = $_ports, " device /dev/lp0 fast range 0x378 0x37a" # The blank is important # "device" means: if the ports are registered, open this device to block # access. The open must be successfull or access to the ports will be denied. # If you know what you are doing, use /dev/null to fake a device to block # $_ports = "" # [priv] list of IRQ numbers (2-15) to pass to DOS such as "3 8 10".Default: "" # $_irqpassing = "" # [priv] DOS memory to map directly: list of segment values/ranges such as # "0xc8000 range 0xcc000,0xcffff". Default: "" # $_hardware_ram = "" # [priv] on: give access to the PCI configuration space. Default: (off) # $_pci = (off) ############################################################################## ## Console video # The following settings apply to direct console video only and are # ignored by xdosemu. Many are privileged and need suid/sudo/root. # use 'console' video (direct video ram access). Default: (0) # $_console = (0) # use the cards BIOS to set graphics and allow direct port i/o. Default: (0) # $_graphics = (0) # [priv] run the VGA card's initialization BIOS routine (most cards don't # need this). Default: (0) # $_vbios_post = (0) # [priv] set the address of your VBIOS (e.g. 0xc000, 0xe000). # Default: (0)=autodetect. # $_vbios_seg = (0) # [priv] set the size of your BIOS (e.g. 0x10000, 0x8000). # Default: (0)=autodetect. # $_vbios_size = (0) # [priv] size of (real) video RAM. Default: 1024 # $_vmemsize = (1024) # [priv] real chipset: one of: plainvga, trident, et4000, diamond, avance # cirrus, matrox, wdvga, paradise, ati, s3, sis, svgalib # these drivers are likely to be out of date for modern cards; "plainvga" # may work. Default: ""="plainvga" # $_chipset = "" # [priv] see $_ports, but these are only opened if DOSEMU is run on the # Linux console. Default: "" # $_console_ports = "" # [priv] see $_pci, but this option is only used if DOSEMU is run on the # Linux console. Default: (off) # $_console_pci = (off) # [priv] if you have one vga _plus_ one hgc (2 monitors) # $_dualmon = (0) -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=pl_PL.ISO8859-2, LC_CTYPE=pl_PL.ISO8859-2 (charmap=ISO-8859-2) Versions of packages dosemu depends on: ii libc6 2.3.6.ds1-4 GNU C Library: Shared libraries ii libslang2 2.0.6-3 The S-Lang programming library - r ii libx11-6 2:1.0.0-9 X11 client-side library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxxf86vm1 1:1.0.1-2 X11 XFree86 video mode extension l ii xbase-clients 1:7.1.ds-3 miscellaneous X clients ii xutils 1:7.1.ds-1 X Window System utility programs Versions of packages dosemu recommends: ii dosemu-freedos 1:0.0.b9r5a-3 FreeDOS package for DOSEMU -- debconf-show failed -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
