from a Dell PowerEdge 1850. # cat /proc/megaraid/hba0/config v2.10.3 (Release Date: Thu Apr 8 16:16:05 EDT 2004) PERC 4e/Si Controller Type: 438/466/467/471/493/518/520/531/532 Controller Supports 40 Logical Drives Controller capable of 64-bit memory addressing Controller is not using 64-bit memory addressing Base = f8818000, Irq = 46, Initial Logical Drives = 1, Channels = 1 Version =513O:H418, DRAM = 256Mb Controller Queue Depth = 254, Driver Queue Depth = 126 support_ext_cdb = 1 support_random_del = 1 boot_ldrv_enabled = 1 boot_ldrv = 0 boot_pdrv_enabled = 0 boot_pdrv_ch = 0 boot_pdrv_tgt = 0 quiescent = 0 has_cluster = 0
Module Parameters: max_cmd_per_lun = 63 max_sectors_per_io = 128 # lspci -n && lspci -vvv 0000:02:0e.0 0104: 1028:0013 (rev 06) 0000:02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 4 (rev 06) Subsystem: Dell PowerEdge Expandable RAID Controller 4e/Si Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (32000ns min), Cache Line Size: 0x10 (64 bytes) Interrupt: pin A routed to IRQ 46 Region 0: Memory at d80f0000 (32-bit, prefetchable) [size=64K] Region 2: Memory at dfde0000 (32-bit, non-prefetchable) [size=128K] Expansion ROM at dfe00000 [disabled] [size=128K] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [e0] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=3 Status: Bus=2 Dev=14 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge, DMMRBC=1, DMOST=3, DMCRS=1, RSCEM- # ls /proc/megaraid/hba0/ battery-status diskdrives-ch1 mailbox raiddrives-20-29 stat config diskdrives-ch2 raiddrives-0-9 raiddrives-30-39 diskdrives-ch0 diskdrives-ch3 raiddrives-10-19 rebuild-rate -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]