Hi,
I should have waited a bit longer before filing this bug report:
The charge is not reported as a constant but seems to go down in 25% portions.
Starting with a fully charged battery powersave will show 100% until the acpi
charge goes down to 94% . Powersave will then display 75%. I don't know yet
how this will continue.
Please, accept my apologies for not properly checking the correctness of my
original report, especially in the light of giving it such a high severity.
Sorry!!!
On Friday 08 December 2006 19:05, you wrote:
> powersaved gets the information from hal. What does
> "lshal | grep battery" say?
Here's the output:
~$ lshal | grep battery
battery.remaining_time = 10800 (0x2a30) (int)
battery.charge_level.percentage = 75 (0x4b) (int)
battery.charge_level.rate = 1 (0x1) (int)
battery.charge_level.last_full = 4 (0x4) (int)
battery.charge_level.current = 3 (0x3) (int)
battery.voltage.current = 1 (0x1) (int)
battery.reporting.rate = 1596 (0x63c) (int)
battery.reporting.current = 3696 (0xe70) (int)
battery.charge_level.capacity_state = 'ok' (string)
battery.rechargeable.is_discharging = true (bool)
battery.rechargeable.is_charging = false (bool)
battery.is_rechargeable = true (bool)
battery.charge_level.unit = 'mWh' (string)
battery.charge_level.granularity_2 = 473 (0x1d9) (int)
battery.charge_level.granularity_1 = 473 (0x1d9) (int)
battery.charge_level.low = 1953 (0x7a1) (int)
battery.charge_level.warning = 4440 (0x1158) (int)
battery.charge_level.design = 65120 (0xfe60) (int)
battery.voltage.design = 14800 (0x39d0) (int)
battery.voltage.unit = 'mV' (string)
battery.reporting.granularity_2 = 32 (0x20) (int)
battery.reporting.granularity_1 = 32 (0x20) (int)
battery.reporting.low = 132 (0x84) (int)
battery.reporting.warning = 300 (0x12c) (int)
battery.reporting.design = 4400 (0x1130) (int)
battery.reporting.last_full = 4206 (0x106e) (int)
battery.reporting.unit = 'mAh' (string)
battery.technology = 'lithium-ion' (string)
battery.reporting.technology = 'LION' (string)
battery.serial = '12025' (string)
battery.model = 'ZL01' (string)
battery.vendor = 'SANYO' (string)
battery.present = true (bool)
info.capabilities = {'battery'} (string list)
info.category = 'battery' (string)
battery.type = 'primary' (string)
linux.acpi_path = '/proc/acpi/battery/BAT1' (string)
battery.present = false (bool)
info.capabilities = {'battery'} (string list)
info.category = 'battery' (string)
battery.type = 'primary' (string)
linux.acpi_path = '/proc/acpi/battery/BAT2' (string)
Kind regards,
Felix
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
