Am Donnerstag 14 Dezember 2006 09:47 schrieb Modestas Vainius: > 2. # dpkg -i --force-all > kdebase-kio-plugins_3.5.5a.dfsg.1-4~mdx1_i386.deb (I think, force will > be needed due to dependences).
Hello Modestas, Thanks for all your efforts. This installed nicely without --force-anything > 3. $ killall kded; kdeinit kded; dcop kicker kicker restart -- OR -- > log off & log on to KDE > 4. Now try to mount your hard drive. It will fail, however, you should > see a more verbose error message. Please post it here. So there we are: --------------------------------------------------------------------- [EMAIL PROTECTED]:~> konqueror kio (KIOConnection): ERROR: Could not write data kded: ERROR: mount failed for /org/freedesktop/Hal/devices/volume_uuid_4285_F899: org.freedesktop.Hal.Device.Volume.PermissionDenied - <qt> kded: ERROR: mounting /org/freedesktop/Hal/devices/volume_uuid_4285_F899 returned <qt>Berechtigungen verweigert<p><i>Device /dev/sda1 is listed in /etc/fstab. Refusing to mount.</i></p></qt> kded: ERROR: mount failed for /org/freedesktop/Hal/devices/volume_uuid_4285_F899: org.freedesktop.Hal.Device.Volume.PermissionDenied - <qt> kded: ERROR: mounting /org/freedesktop/Hal/devices/volume_uuid_4285_F899 returned <qt>Berechtigungen verweigert<p><i>Device /dev/sda1 is listed in /etc/fstab. Refusing to mount.</i></p></qt> --------------------------------------------------------------------- Yes, the USB harddisk is listed in /etc/fstab as well but with mount option "user,noauto". --------------------------------------------------------------------- # externe 2,5"-USB-Festplatte LABEL=austausch /mnt/austausch vfat user,noauto,iocharset=iso8859-15 0 2 LABEL=daten /mnt/daten xfs user,noauto,logbufs=8 0 2 --------------------------------------------------------------------- This never has been a problem. So I think there must have been a hal policy / behavior change recently. One that I do not think makes sense. When /etc/fstab already allows me as a user to mount the partitions on that drive, hal should do so, too! While it is no problem for me to remove those /etc/fstab entries for this harddisk, I think this is not more than a work-around. Fortunately hal only refuses to mount LABEL=austausch then and not any /dev/sda1. But mounting does work when I replace the label based mount line by and do the step 3 (restarting dcop and kdeinit stuff): --------------------------------------------------------------------- /dev/sda1 /mnt/austausch vfat user,noauto,iocharset=iso8859-15 0 2 --------------------------------------------------------------------- It even uses my settings then which I would prefer anyway: --------------------------------------------------------------------- shambala:~> mount | grep /dev/sda1 /dev/sda1 on /mnt/austausch type vfat (rw,noexec,nosuid,nodev,iocharset=iso8859-15,user=martin) --------------------------------------------------------------------- Thus although that device is listed in /etc/fstab hal mounts the partition which to me is highly inconsistent with what it did with the LABEL= entry. It seems that HAL does not seem to support "LABEL=" /etc/fstab entries properly! When I then replace /dev/sda1 by LABEL=austausch again and do step 3 again, hal seems to get hopelessly confused and mounts the partition as: --------------------------------------------------------------------- shambala:/etc/modprobe.d> mount | grep /dev/sda1 /dev/sda1 on /media/disk type vfat (rw,noexec,nosuid,nodev,noatime,uid=1000,utf8,shortname=lower) --------------------------------------------------------------------- After /etc/init.d/dbus-1 restart and KDE logout and login it again gives the refuses to mount cause /etc/fstab entry message! What I would like hal to do is: If there is a LABEL= based entry with "user" mount option in /etc/fstab then use that one instead. So it should handle a LABEL= based entry just like a /dev/devicefile based one. The hal version where I could still mount the partition regardless of the /etc/fstab entry being there or not always mounted to /media/sda1. It seems that it completely ignored the /etc/fstab entry, but this new hal does not. If I have the choice between these both alternatives only, I would like hal to ignore my /etc/fstab stuff. Sure I could get rid of any static mount entries, but I like the flexibility, especially for doing backups onto a bigger 3.5 inch USB drive I usually do not like to mount with "sync" option as I know I won't unplug the drive before I unmounted it. At least I think we now have an idea on how you can reproduce the issue I reported. And I think the casual user would be confused to no end by this new behaviour. If nothing else is possible at least a note in README.Debian would be very helpful! I can write you a paragraph or two about this once we agreed whats really happening and what should be in there. > 5. Finally, when done, revert back to previous kdebase-kio-plugins > either by downloading and # dpkg -i it or # apt-get -f install (if it > does the correct thing). Then repeat step 3. Actually I prefer your version as it gives at least an useful hint on whats going wrong. "Rights or access denied" was not really helpful in figuring out the problem ;-). So thanks again for your efforts. Regards, -- Martin 'Helios' Steigerwald - http://www.Lichtvoll.de GPG: 03B0 0D6C 0040 0710 4AFA B82F 991B EAAC A599 84C7
pgpq5yZW4VYnY.pgp
Description: PGP signature
