reassign 404987 discover-data retitle 404987 1002:4173 Radeon 9550 (Secondary) needs ati driver thanks
On Saturday 30 December 2006 01:11, Luca Capello wrote: > All went smoothly until the hard disk partitioning step: I could > resize the last NTFS logical partition (/dev/sda7) and create two more > partitions (one primary for /boot and the other one for LVM). Once > the changes written, I couldn't leave the partition step without > configuring the LVM (it complained about missing the / mount-point). > Then, when continuing it pointed me again to the configure LVM option, > which resulted in an error (sorry, I don't remember exactly the > words). I skipped that part and the installation could finish with no > other errors. I'm afraid we cannot do all that much about this if you cannot give a more precise description of what you steps preceded the error and what the exact error message was. So, unless you want to try to reproduce this, I'd suggest we drop it. We'll keep an eye out for other reports (I do have an idea what it could have been, but that's a very wild guess with the available now. > BTW, grub was installed on the MBR and the X-autoconfiguration worked > out-of-the-box, with the graphic card set to use the 'vesa' driver. > Switching to the more appropriate 'ati' driver works out-of-the-box as > well (with only the s/vesa/ati/ substitution). >From your lspci output: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AS [Radeon 9550] [1002:4153] 01:00.1 Display controller [0380]: ATI Technologies Inc RV350 ?? [Radeon 9550] (Secondary) [1002:4173] Hmm. The program responsible for X11-driver detection has the lines below for your hardware, so the only way I can explain that is if you are using the secondary channel. Can you confirm that? 10024153 video Server:XFree86(ati) RV350 AS [Radeon 9550] 10024173 video unknown RV350 AS [Radeon 9550] (Secondary) Reassigning to discover-data for this issue. Cheers, FJP -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
