Package: installation-reports INSTALL REPORT
Debian-installer-version: rc3-i386 uname -a: Linux sarge 2.4.27-2-386 #1 Thu Jan 20 10:55:08 JST 2005 i686 GNU/Linux Date: Thu Mar 24 21:00 GMT+2 Method: Net-inst, from cd-rom. Not proxied, from ftp.fi.debian.org Machine: Self-made Processor: Athlon XP1600+ (1.4GHz) Memory: 1024MB Root Device: IDE, Seagate Barracuda 7200.7 Root Size/partition table: Disk /dev/hdd: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdd1 1 4400 35342968+ 83 Linux /dev/hdd2 4401 4440 321300 82 Linux swap /dev/hdd3 4441 4865 3413812+ 83 Linux / at /dev/hdd1, swap at /dev/hdd2 (/dev/hdd3 not used) (/dev/hda is not used, either) Output of lspci and lspci -n: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] 0000:00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 0000:00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 0000:00:0b.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) 0000:00:0b.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04) 0000:00:0b.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04) 0000:00:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge 0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b) 0000:00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b) 0000:00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AR [Radeon 9600] 0000:01:00.1 Display controller: ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary) --- 0000:00:00.0 0600: 1106:3099 0000:00:01.0 0604: 1106:b099 0000:00:0a.0 0400: 109e:036e (rev 11) 0000:00:0a.1 0480: 109e:0878 (rev 11) 0000:00:0b.0 0401: 1102:0004 (rev 04) 0000:00:0b.1 0980: 1102:7003 (rev 04) 0000:00:0b.2 0c00: 1102:4001 (rev 04) 0000:00:0c.0 0200: 10b7:9200 (rev 74) 0000:00:11.0 0601: 1106:3074 0000:00:11.1 0101: 1106:0571 (rev 06) 0000:00:11.2 0c03: 1106:3038 (rev 1b) 0000:00:11.3 0c03: 1106:3038 (rev 1b) 0000:00:11.4 0c03: 1106:3038 (rev 1b) 0000:01:00.0 0300: 1002:4152 0000:01:00.1 0380: 1002:4172 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Installation itself went fine. Problems: 1. GNOME has not Finnish keymap selected, even though Finnish was selected as the installation language. This should be corrected! Manually fixed by changing /desktop/gnome/peripherals/keyboard/xkb/ layouts from us to fi. XF86Config-4 had the correct XkbLayout already. 2. I've both a tv card and Audigy2 sound card, which both have mixers. The tv card is not a real audio device, yet it is configured as the primary "sound card" and I can't get any audio out of my machine. I had the same problem with Ubuntu Warty, and though I had some success with esound.conf -d parameter, the only way I found to fix the problem permanently was to remove the snd-bt87x module entirely, which is apparently btaudio in 2.4 kernels. This behavior is fixed in eg. Ubuntu Hoary. Ideas: 3. libtheora0 should be installed by default when desktop package is selected. Ogg Theora is The free video codec at the moment, and even though it's in "alpha" stage its bitstream is fixed and it's fully usable. It'd be nice to play Theora videos out-of-the-box with Sarge. Now plays with Totem as soon as libtheora0 is installed. Thanks, I'll be happy to help in any of these three subjects! And it'd be _really_ great to have Theora in sarge by default :) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
