Hello Maximilan Error is still here with the sid kernel. I will run a memory check overnight, just to be sure...
Regards Matthias Kreis Error message from console over serial (Only way to get the messages) /usr/src/modules/gspca/Sunplus/spca561.h: [spca561_init:497] Find spca561 USB Product ID 92e /usr/src/modules/gspca/gspca_core.c: [spca5xx_set_light_freq:1853] Sensor currently not support light frequency banding filters. sky2 eth0: rx error, status 0x7ffc0001 length 660 sky2 eth0: rx error, status 0x7ffc0001 length 1064 EXT2-fs error (device sdb2): ext2_new_block: <6>/usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:929] Non-zero status (-18) in isoc completion handler. /usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:929] Non-zero status (-18) in isoc completion handler. corrupted free blocks counters EXT2-fs error (device sdb2): ext2_new_block: corrupted free blocks counters sky2 0000:05:00.0: pci hw error (0xffff) sky2 0000:05:00.0: pci express error (0xffffffff) sky2 eth0: hw error interrupt status 0xffffffff sky2 eth0: ram data read parity error sky2 eth0: ram data write parity error sky2 eth0: MAC parity error sky2 eth0: RX parity error sky2 eth0: TCP segmentation error sky2 <NULL>: hw error interrupt status 0xffffff sky2 <NULL>: ram data read parity error sky2 eth0: remote fault<1>BUG: unable to handle kernel NULL pointer dereference at virtual address 0000002c printing eip: f89562a8 *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: nls_utf8 nls_cp437 vfat fat vmnet vmmon nvidia ppdev lp button ac battery ipv6 nfs lockd nfs_acl sunrpc sk98lin ext2 ide_disk snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq tsdev snd_via82xx snd_via82xx_modem snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_mpu401 snd_mpu401_uart snd_pcm gspca snd_rawmidi snd_seq_device snd_timer shpchp i2c_viapro snd parport_pc parport psmouse i2c_core videodev v4l1_compat v4l2_common pci_hotplug soundcore amd64_agp agpgart analog sky2 snd_page_alloc serio_raw gameport floppy evdev pcspkr rtc ext3 jbd mbcache dm_mirror dm_snapshot dm_mod raid1 md_mod ide_generic sd_mod ide_cd cdrom usb_storage sata_via via82cxxx libata scsi_mod ehci_hcd generic uhci_hcd ide_core usbcore thermal processor fan CPU: 0 EIP: 0060:[<f89562a8>] Tainted: P VLI EFLAGS: 00010292 (2.6.18-3-k7 #1) EIP is at sky2_phy_intr+0xf/0x1ca [sky2] eax: dfca8840 ebx: 00000001 ecx: 00000000 edx: 00000001 esi: ffffffff edi: 00000000 ebp: dfca8840 esp: c0319ef8 ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, ti=c0318000 task=c02cb700 task.ti=c0318000) Stack: ffff0202 c011ffff 00ffff01 00000000 00000001 f8956038 00042010 ffffffff c1807b40 00191466 f8956fff c0319f70 df971800 dfca8840 00000040 c18077cc ffffffff 00000286 c01255ac 00000100 c0367bc0 00000286 c01256bc 00000000 Call Trace: [<c011ffff>] do_exit+0x644/0x730 [<f8956038>] sky2_hw_error+0xe5/0x110 [sky2] [<f8956fff>] sky2_poll+0x191/0x947 [sky2] [<c01255ac>] lock_timer_base+0x15/0x2f [<c01256bc>] __mod_timer+0x98/0xa2 [<c022d109>] net_rx_action+0x92/0x17d [<c01219b8>] __do_softirq+0x5a/0xbb [<c0121a4f>] do_softirq+0x36/0x3a [<c0103723>] apic_timer_interrupt+0x1f/0x24 [<c0101a5b>] default_idle+0x0/0x59 [<c0101a8c>] default_idle+0x31/0x59 [<c0101b53>] cpu_idle+0x9f/0xb9 [<c031e719>] start_kernel+0x398/0x39f Code: a8 00 00 00 50 ff 73 04 68 21 95 95 f8 e8 da 77 7c c7 83 c4 14 59 5b 5b 5e 5f 5d c3 55 89 c5 57 56 53 89 d3 83 ec 18 8b 7c 90 08 <8b> 47 2c a8 02 0f 84 a8 01 00 00 8d 87 10 03 00 00 8d b7 00 03 EIP: [<f89562a8>] sky2_phy_intr+0xf/0x1ca [sky2] SS:ESP 0068:c0319ef8 <0>Kernel panic - not syncing: Fatal exception in interrupt maximilian attems schrieb: > severity 406466 important > tags 406466 moreinfo > stop aka affects only one driver > > On Thu, Jan 11, 2007 at 12:58:41PM +0100, Matthias Kreis wrote: >> Package: linux-image-2.6.18-3-k7 >> Version: 2.6.18-7 >> Severity: critical >> Justification: breaks the whole system >> >> Hello together >> >> I found a new (hopefully) bug regarding the sky2 driver. From time to >> time my system looks up. >> Fortunatly I was able to get the messages from the kernel when the >> system freezes. >> >> I'm not shure if the hardware is faulty, but I had no such problems with >> the older 2.6.17 kernel execpt the sky lookup bug >> #391382. >> >> Thanks for your help >> >> Matthias Kreis > > can you please test the current sid linux images that are up to be > uploaded if the bug is still present there? > see buildserver sid apt lines: > http://wiki.debian.org/DebianKernel > > > thanks > > -- > maks > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]