Package: installation-reports Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/sparc/20050327/sarge-sparc-netinst.iso uname -a: Linux uv 2.4.27-2-sparc64 #1 Mon Feb 14 19:11:37 PST 2005 sparc64 GNU/Linux Date: Tuesday 29th March - very early morning (1->4) BST Method: Boot from CD-rom, install from UK mirror, www.uk.debian.org
Machine: Sun Ultra 5 Processor: TI UltraSparc IIi (Sabre) Memory: 128Mb Root Device: IDE disk, 8.6Gb Seagate generic Root Size/partition table: 2Gb for root, 4gb for /usr all on same disk Output of lspci and lspci -n: 0000:00:00.0 0600: 108e:a000 0000:00:01.0 0604: 108e:a000 (rev 13) 0000:00:01.1 0604: 108e:a000 (rev 13) 0000:01:01.0 0680: 108e:1000 (rev 01) 0000:01:01.1 0200: 108e:1001 (rev 01) 0000:01:02.0 0300: 1002:4750 (rev 5c) 0000:01:03.0 0101: 1095:0646 (rev 03) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: A series of error messages are given during boot: "end_request: I/O error, dev 03:00 (hda), sector x" for sectors 0,2,4,6,8,10,12,14 followed by " unable to read partition table" just before messages from usb.c. Also after "VFS: Mounted root (cramfs filesystem)" I get five lots of "Unimplemented SPARC system call 188" then "hda:attached ide-disk driver" None of this seems to be a problem and everything works as expected. HTH, Cheers, - Martin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
