# These templates have been reviewed by the debian-l10n-english
# team
#
# If modifications/additions/rewording are needed, please ask
# for an advice to debian-l10n-english@lists.debian.org
#
# Even minor modifications require translation updates and such
# changes should be coordinated with translators and reviewers.

Template: dtc-xen/conf_soap_port
Type: string
Default: 8089
_Description: Server port:
 Please enter the port the server will bind to.

Template: dtc-xen/conf_soap_login
Type: string
Default: dtc-xen
_Description: SOAP server login:
 Dtc-xen will connect to a SOAP Python server (to which a dtc panel can connect, in
 order to start, stop, create and destroy a Virtual Private Server).
 .
 Please enter the login name to connect to the server.

Template: dtc-xen/conf_soap_pass
Type: password
Default: dtc-xen
_Description: SOAP server password:
 Dtc-xen will generate a .htpasswd file for the login you have just
 configured.
 .
 Please enter the password to use in that file.

Template: dtc-xen/conf_soap_domain_name
Type: string
Default: example.com
_Description: Server hostname:
 Please enter the domain name for the dtc-xen server. This will be used as a
 part of the URL by the SOAP dtc panel client.

Template: dtc-xen/conf_node_number
Type: string
Default: 0101
_Description: VPS Server node number:
 Please enter the value to use to set up VPS (Virtual Private Server)
 numbering.
 .
 Assuming this value is 'XXXX', the node number will be 'xenXXXXYY',
 YY being the VPS number itself (xenYY). This node number must be 4
 or 5 characters long.
 .
 As a consequence of this choice, the server's hostname will be
 nodeXXXX.example.com (which you can later add in your DTC control
 panel).

Template: dtc-xen/conf_debian_repository
Type: string
Default: ftp://ftp.us.debian.org/debian
_Description: Debian repository for VPS creation:
 Please enter the repository to use for creating the VPS (Virtual Private
 Server). The current /etc/apt/sources.list file will be copied to the
 created VPS so the repository you enter here will be used only during
 the debootstrap stage of the VPS creation.

Template: dtc-xen/conf_netmask
Type: string
Default: 255.255.255.0
_Description: Network mask for the VPS:
 Please enter the network mask to use in the created Virtual Private
 Server's network settings.

Template: dtc-xen/conf_network
Type: string
Default: 192.168.60.0
_Description: Network address for the VPS:
 Please enter the network address to use in the created Virtual Private
 Server's network settings.

Template: dtc-xen/conf_broadcast
Type: string
Default: 192.168.60.255
_Description: Broadcast address for the VPS:
 Please enter the network broadcast address to use in the created
 Virtual Private Server's network settings.

Template: dtc-xen/conf_gateway
Type: string
Default: 192.168.60.254
_Description: Gateway address for the VPS:
 Please enter the network gateway address to use in the created
 Virtual Private Server's network settings.

Template: dtc-xen/conf_linux_kernel_name
Type: string
Default: 2.6.16.27-xenU
_Description: Xen kernel release name:
 Please enter the kernel version number as it appears with the
 'uname -a' command. 
 .
 A kernel domU with that name must be located in /boot (example:
 vmlinuz-2.6.16.27-xenU) and its corresponding modules must be in
 /lib/modules.

Template: dtc-xen/conf_lvm_name
Type: string
Default: lvm1
_Description: Volume group to create VPS in:
 Dtc-xen creates physical partitions in an existing LVM volume group
 .
 Please enter that volume group name. The volume group size must fit
 all the virtual machiness you will set up later on this server. If
 you don't want to use LVM (because you don't care if loopback is
 slower), leave this setting to the default value.

Template: dtc-xen/conf_info_finish_setup
Type: note
_Description: Installation completion
 To finish the installation, you need to launch
 /usr/sbin/dtc-xen_finish_install. 
 .
 This script will remove port forwarding from the current sshd_config
 file and add the permission of xm console to the group xenusers so that
 users can login to the physical console. It will then try to
 download the files needed to setup Gentoo and CentOS into the
 virtual machines. 
 .
 Please note that the system is currently safe (connections to a
 physical console as xenXX will be rejected because the /etc/sudoers
 is not changed), but a basic user won't be able to log into his
 physical console using ssh.

Template: dtc-xen/conf_vps_mountpoint
Type: string
Default: /var/lib/dtc-xen/mnt
_Description: VPS mountpoint:
 In order to setup the managed Virtual Private Server (VPS), dtc-xen
 will mount the logical volume or file loopback partition on the dom0
 of the Xen server.
 .
 Please enter the path to the mount point.
 .
 This information will also be used to automatically set the
 /etc/fstab mount points, allowing faster mounting and maintenance of
 the VPS.
