Package: installation-reports Severity: normal -- Package-specific info:
Boot method: Netboot (via replacement firmware) Image version: <http://ftp.uk.debian.org/debian/dists/etch/main/installer-arm/rc2/images/iop32x/netboot/n2100.bin> Date: Sat Jul 14 15:00:00 EST 2007 Machine: Thecus N2100 Partitions: $ df -Tl Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/mapper/n2100-root reiserfs 204788 78140 126648 39% / tmpfs tmpfs 258664 0 258664 0% /lib/init/rw udev tmpfs 10240 32 10208 1% /dev tmpfs tmpfs 258664 0 258664 0% /dev/shm /dev/mapper/n2100-home reiserfs 524268 32852 491416 7% /home /dev/mapper/n2100-tmp reiserfs 262132 32964 229168 13% /tmp /dev/mapper/n2100-usr reiserfs 1048540 168964 879576 17% /usr /dev/mapper/n2100-var reiserfs 485803536 164252 485639284 1% /var Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [ ] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [ ] Install boot loader: [O] Overall install: [O] Comments/Problems: Installation was performed as per listed procedure at <http://www.cyrius.com/debian/iop/n2100/install.html> Installer was able to create software RAID1 device along with LVM physical volume, volume group and logical volumes. No tasks were selected. No problems or issues were experienced. -- ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="4.0 (installer build 20070308)" X_INSTALLATION_MEDIUM=netboot ============================================== Installer hardware-summary: ============================================== umame -a: Linux n2100 2.6.18-4-iop32x #1 Thu Feb 22 03:51:25 UTC 2007 armv5tel unknown lspci -nn: 00:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) lspci -nn: 00:02.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) lspci -nn: 00:03.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller [1095:3512] (rev 01) lspci -nn: 00:04.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) lspci -nn: 00:04.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) lspci -nn: 00:04.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) lspci -vnn: 00:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) lspci -vnn: Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 27 lspci -vnn: I/O ports at fe000000 [size=256] lspci -vnn: Memory at 800a0200 (32-bit, non-prefetchable) [size=256] lspci -vnn: Expansion ROM at 80080000 [disabled] [size=64K] lspci -vnn: Capabilities: [dc] Power Management version 2 lspci -vnn: Capabilities: [60] Vital Product Data lspci -vnn: lspci -vnn: 00:02.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) lspci -vnn: Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 30 lspci -vnn: I/O ports at fe000400 [size=256] lspci -vnn: Memory at 800a0300 (32-bit, non-prefetchable) [size=256] lspci -vnn: Expansion ROM at 80090000 [disabled] [size=64K] lspci -vnn: Capabilities: [dc] Power Management version 2 lspci -vnn: Capabilities: [60] Vital Product Data lspci -vnn: lspci -vnn: 00:03.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller [1095:3512] (rev 01) lspci -vnn: Subsystem: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller [1095:3512] lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 29 lspci -vnn: I/O ports at fe000850 [size=8] lspci -vnn: I/O ports at fe000860 [size=4] lspci -vnn: I/O ports at fe000858 [size=8] lspci -vnn: I/O ports at fe000864 [size=4] lspci -vnn: I/O ports at fe000840 [size=16] lspci -vnn: Memory at 800a0000 (32-bit, non-prefetchable) [size=512] lspci -vnn: [virtual] Expansion ROM at 80000000 [disabled] [size=512K] lspci -vnn: Capabilities: [60] Power Management version 2 lspci -vnn: lspci -vnn: 00:04.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) lspci -vnn: Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] lspci -vnn: Flags: bus master, medium devsel, latency 22, IRQ 28 lspci -vnn: I/O ports at fe000800 [size=32] lspci -vnn: Capabilities: [80] Power Management version 2 lspci -vnn: lspci -vnn: 00:04.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) lspci -vnn: Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] lspci -vnn: Flags: bus master, medium devsel, latency 22, IRQ 27 lspci -vnn: I/O ports at fe000820 [size=32] lspci -vnn: Capabilities: [80] Power Management version 2 lspci -vnn: lspci -vnn: 00:04.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) (prog-if 20) lspci -vnn: Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104] lspci -vnn: Flags: bus master, medium devsel, latency 22, IRQ 29 lspci -vnn: Memory at 800a0400 (32-bit, non-prefetchable) [size=256] lspci -vnn: Capabilities: [80] Power Management version 2 lspci -vnn: modulemap: 10ec:8169 r8169 modulemap: 10ec:8169 r8169 modulemap: 1095:3512 sata_sil modulemap: 1106:3038 uhci_hcd modulemap: 1106:3038 uhci_hcd modulemap: 1106:3104 ehci_hcd lsmod: Module Size Used by lsmod: dm_mod 59120 13 lsmod: raid456 119312 0 lsmod: xor 6888 1 raid456 lsmod: raid1 23488 1 lsmod: raid0 7648 0 lsmod: md_mod 80628 4 raid456,raid1,raid0 lsmod: reiserfs 269556 5 lsmod: ext3 137704 0 lsmod: jbd 59368 1 ext3 lsmod: mbcache 9188 1 ext3 lsmod: vfat 13152 0 lsmod: fat 53660 1 vfat lsmod: isofs 37244 0 lsmod: ide_cd 41476 0 lsmod: cdrom 38364 1 ide_cd lsmod: ide_disk 17056 0 lsmod: ide_generic 1216 0 [permanent] lsmod: aec62xx 7264 0 [permanent] lsmod: alim15x3 11980 0 [permanent] lsmod: cmd64x 10940 0 [permanent] lsmod: cs5520 4768 0 [permanent] lsmod: cs5530 5248 0 [permanent] lsmod: cy82c693 4708 0 [permanent] lsmod: generic 5668 0 [permanent] lsmod: hpt34x 5120 0 [permanent] lsmod: it821x 8356 0 [permanent] lsmod: ns87415 4180 0 [permanent] lsmod: opti621 4484 0 [permanent] lsmod: pdc202xx_new 8736 0 [permanent] lsmod: pdc202xx_old 10496 0 [permanent] lsmod: piix 9892 0 [permanent] lsmod: sc1200 7232 0 [permanent] lsmod: serverworks 9160 0 [permanent] lsmod: siimage 12192 0 [permanent] lsmod: slc90e66 5248 0 [permanent] lsmod: triflex 3840 0 [permanent] lsmod: trm290 4450 0 [permanent] lsmod: via82cxxx 9508 0 [permanent] lsmod: usb_storage 39332 0 lsmod: ide_core 114280 24 ide_cd,ide_disk,ide_generic,aec62xx,alim15x3,cmd64x,cs5520,cs5530,cy82c693,generic,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,piix,sc1200,serverworks,siimage,slc90e66,triflex,trm290,via82cxxx lsmod: sd_mod 19248 4 lsmod: sata_sil 12040 2 lsmod: libata 105460 1 sata_sil lsmod: scsi_mod 102800 3 usb_storage,sd_mod,libata lsmod: ehci_hcd 31016 0 lsmod: uhci_hcd 22312 0 lsmod: usbcore 125928 4 usb_storage,ehci_hcd,uhci_hcd lsmod: r8169 30508 0 df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 102400 27868 74532 27% / df: tmpfs 258664 392 258272 0% /dev df: tmpfs 258664 392 258272 0% /dev df: tmpfs 258664 392 258272 0% /.dev df: /dev/mapper/n2100-root 204788 77960 126828 38% /target df: /dev/mapper/n2100-home 524268 32840 491428 6% /target/home df: /dev/mapper/n2100-tmp 262132 32840 229292 13% /target/tmp df: /dev/mapper/n2100-usr 1048540 121860 926680 12% /target/usr df: /dev/mapper/n2100-var 485803536 129596 485673940 0% /target/var free: total used free shared buffers free: Mem: 517328 391224 126104 0 66500 free: Swap: 524280 0 524280 free: Total: 1041608 391224 650384 cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 48: pccardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 49: pccardctl: not found cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found /proc/cpuinfo: Processor : XScale-80219 rev 0 (v5l) /proc/cpuinfo: BogoMIPS : 593.10 /proc/cpuinfo: Features : swp half fastmult edsp /proc/cpuinfo: CPU implementer : 0x69 /proc/cpuinfo: CPU architecture: 5TE /proc/cpuinfo: CPU variant : 0x0 /proc/cpuinfo: CPU part : 0x2e3 /proc/cpuinfo: CPU revision : 0 /proc/cpuinfo: Cache type : undefined 5 /proc/cpuinfo: Cache clean : undefined 5 /proc/cpuinfo: Cache lockdown : undefined 5 /proc/cpuinfo: Cache format : Harvard /proc/cpuinfo: I size : 32768 /proc/cpuinfo: I assoc : 32 /proc/cpuinfo: I line length : 32 /proc/cpuinfo: I sets : 32 /proc/cpuinfo: D size : 32768 /proc/cpuinfo: D assoc : 32 /proc/cpuinfo: D line length : 32 /proc/cpuinfo: D sets : 32 /proc/cpuinfo: /proc/cpuinfo: Hardware : Thecus N2100 /proc/cpuinfo: Revision : 0000 /proc/cpuinfo: Serial : 0000000000000000 /proc/ioports: fe000000-fe00ffff : N2100 PCI I/O Space /proc/ioports: fe000000-fe0000ff : 0000:00:01.0 /proc/ioports: fe000000-fe0000ff : r8169 /proc/ioports: fe000400-fe0004ff : 0000:00:02.0 /proc/ioports: fe000400-fe0004ff : r8169 /proc/ioports: fe000800-fe00081f : 0000:00:04.0 /proc/ioports: fe000800-fe00081f : uhci_hcd /proc/ioports: fe000820-fe00083f : 0000:00:04.1 /proc/ioports: fe000820-fe00083f : uhci_hcd /proc/ioports: fe000840-fe00084f : 0000:00:03.0 /proc/ioports: fe000840-fe00084f : sata_sil /proc/ioports: fe000850-fe000857 : 0000:00:03.0 /proc/ioports: fe000850-fe000857 : sata_sil /proc/ioports: fe000858-fe00085f : 0000:00:03.0 /proc/ioports: fe000858-fe00085f : sata_sil /proc/ioports: fe000860-fe000863 : 0000:00:03.0 /proc/ioports: fe000860-fe000863 : sata_sil /proc/ioports: fe000864-fe000867 : 0000:00:03.0 /proc/ioports: fe000864-fe000867 : sata_sil /proc/iomem: 80000000-83ffffff : N2100 PCI Memory Space /proc/iomem: 80000000-8007ffff : 0000:00:03.0 /proc/iomem: 80080000-8008ffff : 0000:00:01.0 /proc/iomem: 80090000-8009ffff : 0000:00:02.0 /proc/iomem: 800a0000-800a01ff : 0000:00:03.0 /proc/iomem: 800a0000-800a01ff : sata_sil /proc/iomem: 800a0200-800a02ff : 0000:00:01.0 /proc/iomem: 800a0200-800a02ff : r8169 /proc/iomem: 800a0300-800a03ff : 0000:00:02.0 /proc/iomem: 800a0300-800a03ff : r8169 /proc/iomem: 800a0400-800a04ff : 0000:00:04.2 /proc/iomem: 800a0400-800a04ff : ehci_hcd /proc/iomem: a0000000-bfffffff : System RAM /proc/iomem: a001f000-a0201347 : Kernel text /proc/iomem: a0202000-a027a12f : Kernel data /proc/iomem: fe800000-fe800007 : serial8250.0 /proc/iomem: fe800000-fe800007 : serial /proc/iomem: fffff680-fffff698 : IOP3xx-I2C.0 /proc/iomem: fffff680-fffff697 : IOP3xx-I2C /proc/interrupts: CPU0 /proc/interrupts: 9: 978134 IOP IOP3XX Timer Tick /proc/interrupts: 11: 53 IOP IOP3xx-I2C /proc/interrupts: 27: 112906 IOP uhci_hcd:usb2, eth0 /proc/interrupts: 28: 0 IOP uhci_hcd:usb1 /proc/interrupts: 29: 2691284 IOP ehci_hcd:usb3, libata /proc/interrupts: Err: 0 /proc/meminfo: MemTotal: 517328 kB /proc/meminfo: MemFree: 126088 kB /proc/meminfo: Buffers: 66500 kB /proc/meminfo: Cached: 271188 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 203392 kB /proc/meminfo: Inactive: 155960 kB /proc/meminfo: HighTotal: 0 kB /proc/meminfo: HighFree: 0 kB /proc/meminfo: LowTotal: 517328 kB /proc/meminfo: LowFree: 126088 kB /proc/meminfo: SwapTotal: 524280 kB /proc/meminfo: SwapFree: 524280 kB /proc/meminfo: Dirty: 2180 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 21700 kB /proc/meminfo: Mapped: 2616 kB /proc/meminfo: Slab: 19704 kB /proc/meminfo: PageTables: 344 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: CommitLimit: 782944 kB /proc/meminfo: Committed_AS: 54828 kB /proc/meminfo: VmallocTotal: 483328 kB /proc/meminfo: VmallocUsed: 20740 kB /proc/meminfo: VmallocChunk: 458748 kB dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 57: dmidecode: not found ============================================== Installer status: ============================================== Package: preseed-common Status: install ok unpacked Version: 1.28 Depends: cdebconf-udeb, di-utils (>= 1.14) Description: common files for preseeding Package: udpkg Status: install ok unpacked Version: 1.04 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41) Description: tiny dpkg clone Package: oldsys-preseed Status: install ok unpacked Version: 1.3 Depends: devio-udeb Description: Preseed debian-installer from an existing device Package: libnss-dns-udeb Status: install ok unpacked Version: 2.3.6.ds1-13 Description: GNU C Library: NSS helper for DNS - udeb Package: nic-usb-modules-2.6.18-4-iop32x-di Status: install ok unpacked Version: 1.10 Provides: nic-usb-modules Depends: kernel-image-2.6.18-4-iop32x-di, usb-modules-2.6.18-4-iop32x-di Description: USB NIC drivers Package: usb-modules-2.6.18-4-iop32x-di Status: install ok unpacked Version: 1.10 Provides: usb-modules Depends: kernel-image-2.6.18-4-iop32x-di Description: USB support Package: download-installer Status: install ok installed Version: 1.15 Depends: cdebconf-udeb, net-retriever, anna (>= 1.07) Description: Download installer components Installer-Menu-Item: 23 Package: lowmemcheck Status: install ok unpacked Version: 1.25 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03) Description: detect low-memory systems and enter lowmem mode Package: main-menu Status: install ok unpacked Version: 1.18 Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb Description: Debian installer main menu Package: di-utils-shell Status: install ok unpacked Version: 1.45 Depends: cdebconf-udeb, di-utils (>= 1.18) Description: Execute a shell Installer-Menu-Item: 950 Package: di-utils Status: install ok installed Version: 1.45 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb Description: Miscellaneous utilities for the debian installer Package: choose-mirror Status: install ok installed Version: 2.13 Depends: configured-network, choose-mirror-bin Description: Choose mirror to install from (menu item) Installer-Menu-Item: 23 Package: network-preseed Status: install ok unpacked Version: 1.28 Depends: cdebconf-udeb, configured-network, preseed-common Description: download debconf preseed file Installer-Menu-Item: 21 Package: cdebconf-newt-udeb Status: install ok unpacked Version: 0.114 Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52 Description: Newt frontend for Debian Configuration Management System Package: module-init-tools-udeb Status: install ok unpacked Version: 3.3-pre4-2 Depends: libc6 (>= 2.3.5-1) Description: tools for managing Linux kernel modules Package: gpgv-udeb Status: install ok installed Version: 1.4.6-1 Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1) Description: minimal signature verification tool Package: rootskel Status: install ok installed Version: 1.50 Depends: di-utils (>= 1.43), cdebconf-udeb Description: Skeleton root filesystem used by debian-installer Package: openssh-server-udeb Status: install ok installed Version: 1:4.3p2-9 Depends: libc6 (>= 2.3.5-1), libcrypto0.9.8-udeb (>= 0.9.8c-1), zlib1g-udeb (>= 1:1.2.1), libnss-files-udeb Description: Secure shell server for the Debian installer Package: network-console Status: install ok unpacked Version: 1.11 Depends: cdebconf-udeb, configured-network, openssh-server-udeb (>= 1:3.8p1-1) Description: Continue installation remotely using SSH Installer-Menu-Item: 21 Package: udev-udeb Status: install ok unpacked Version: 0.105-3 Depends: libc6 (>= 2.3.5-1) Description: /dev/ and hotplug management daemon Package: libnss-files-udeb Status: install ok installed Version: 2.3.6.ds1-13 Description: GNU C Library: NSS helper for files - udeb Package: libcrypto0.9.8-udeb Status: install ok installed Version: 0.9.8c-4 Provides: libssl0.9.8 Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1) Description: crypto shared library - udeb Package: libfribidi0-udeb Status: install ok unpacked Version: 0.10.7-4 Depends: libc6 (>= 2.3.5-1) Description: Free Implementation of the Unicode BiDi algorithm Package: libtextwrap1-udeb Status: install ok installed Version: 0.1-5 Depends: libc6 (>= 2.3.5-1) Description: text-wrapping library with i18n - runtime udeb Package: auto-install Status: install ok unpacked Version: 0.03 Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18) Description: Support for automatic installs Installer-Menu-Item: 19 Package: usb-discover Status: install ok unpacked Version: 1.06 Depends: cdebconf-udeb Description: Discover USB and load kernel modules Package: rescue-check Status: install ok unpacked Version: 1.9 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18) Description: enter d-i rescue mode if requested Package: nano-udeb Status: install ok unpacked Version: 2.0.2-1 Provides: editor Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3) Description: free Pico clone with some new features - tiny build Package: cdebconf-udeb Status: install ok installed Version: 0.114 Provides: debconf-2.0 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb Description: Debian Configuration Management System (C-implementation) Package: ai-choosers Status: install ok unpacked Version: 0.03 Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23) Description: Delayed configuration of locale and keyboard for auto-install Installer-Menu-Item: 22 Package: libiw28-udeb Status: install ok installed Version: 28-1 Depends: libc6 (>= 2.3.5-1) Description: Tools for manipulating Linux Wireless Extensions Package: kernel-image-2.6.18-4-iop32x-di Status: install ok unpacked Version: 1.10 Provides: kernel-image, socket-modules Description: Linux kernel binary image for the Debian installer Package: cdebconf-text-udeb Status: install ok unpacked Version: 0.114 Depends: cdebconf-udeb, libc6 (>= 2.3.5-1) Description: Plain text frontend for Debian Configuration Management System Package: iso-3166-udeb Status: install ok installed Version: 1.0a-1 Description: provides iso_3166.tab file Package: ethdetect Status: install ok installed Version: 1.50 Provides: ethernet-card-detection Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Description: Detect network hardware and load kernel drivers for it Installer-Menu-Item: 17 Package: devio-udeb Status: install ok unpacked Version: 1.2-1 Depends: libc6 (>= 2.3.5-1) Description: correctly read (or write) a region of a block device Package: busybox-udeb Status: install ok unpacked Version: 1:1.1.3-4 Depends: libc6 (>= 2.3.5-1) Description: Tiny utilities for the debian-installer Package: initrd-preseed Status: install ok unpacked Version: 1.28 Depends: preseed-common Description: load debconf preseed file from /preseed.cfg on the initrd Package: net-retriever Status: install ok installed Version: 1.15 Provides: retriever Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16), gpgv-udeb Description: Fetch modules from the Internet Package: archdetect Status: install ok installed Version: 1.50 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.50) Description: Hardware architecture detector Package: save-logs Status: install ok unpacked Version: 2.29 Depends: cdebconf-udeb Description: save logs and configuration for debug purposes Installer-Menu-Item: 940 Package: di-utils-reboot Status: install ok unpacked Version: 1.45 Depends: cdebconf-udeb Description: Reboot Installer-Menu-Item: 995 Package: anna Status: install ok installed Version: 1.27 Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb Description: anna's not nearly apt, but for the Debian installer, it will do Package: choose-mirror-bin Status: install ok installed Version: 2.13 Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb Description: Choose mirror to install from (program) Package: pciutils-udeb Status: install ok unpacked Version: 1:2.2.4~pre4-1 Depends: libc6 (>= 2.3.5-1) Description: Linux PCI Utilities (udeb) Package: console-keymaps-at Status: install ok installed Version: 2:1.01-7 Provides: console-keymaps Depends: cdebconf-udeb Description: Keymaps for PC-style (PS/2 and AT) keyboards Package: di-utils-terminfo Status: install ok unpacked Version: 1.45 Description: Terminfo entries needed by newt/slang in debian installer Package: hw-detect Status: install ok installed Version: 1.50 Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26) Description: Detect hardware and load kernel drivers for it Package: kbd-chooser Status: install ok installed Version: 1.34 Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps Description: Detect a keyboard and select layout Installer-Menu-Item: 12 Package: libdebian-installer4-udeb Status: install ok installed Version: 0.50 Depends: libc6 (>= 2.3.5-1) Description: Library of common debian-installer functions Package: installation-locale Status: install ok unpacked Version: 1.1 Depends: rootskel Description: UTF-8 C locale Package: env-preseed Status: install ok unpacked Version: 1.28 Description: debconf preseeding via environment variables Package: cdebconf-priority Status: install ok installed Version: 0.114 Depends: cdebconf-udeb Description: Change debconf priority Installer-Menu-Item: 930 Package: netcfg Status: install ok installed Version: 1.36 Provides: configured-network Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection Description: Configure the network Installer-Menu-Item: 18 Package: zlib1g-udeb Status: install ok installed Version: 1:1.2.3-13 Provides: zlib1g Description: compression library - runtime for Debian installer Package: dhcp-client-udeb Status: install ok installed Version: 2.0pl5-19.5 Depends: libc6 (>= 2.3.5-1) Description: DHCP Client for debian-installer Package: libdebconfclient0-udeb Status: install ok installed Version: 0.114 Depends: libc6 (>= 2.3.5-1), cdebconf-udeb Description: Debian Configuration Management System (C-implementation) Package: bogl-bterm-udeb Status: install ok unpacked Version: 0.1.18-1.5 Provides: editor Depends: libc-udeb Description: Ben's Own Graphics Library - graphical terminal Package: nic-modules-2.6.18-4-iop32x-di Status: install ok unpacked Version: 1.10 Provides: nic-modules Depends: kernel-image-2.6.18-4-iop32x-di Description: Common NIC drivers Package: debian-installer Status: install ok installed Version: iop32x-netboot-20070308 Description: debian installation image Package: acorn-fdisk-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 68 Maintainer: Philip Blundell <[EMAIL PROTECTED]> Version: 3.0.6-6.1 Depends: libc6 (>= 2.3.5-1) Description: Partition a hard drive (manual) fdisk package Package: apt-mirror-setup Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 160 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1:0.20 Depends: choose-mirror-bin, cdebconf-udeb Description: set up a mirror in sources.list Package: apt-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 104 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1:0.20 Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb Description: Configure apt Installer-Menu-Item: 70 Package: base-installer Status: install ok installed Priority: required Section: debian-installer Installed-Size: 603 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.76 Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb Provides: kernel-installer Description: Install the base system Installer-Menu-Item: 65 Package: cdrom-core-modules-2.6.18-4-iop32x-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 156 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.10 Depends: kernel-image-2.6.18-4-iop32x-di, scsi-core-modules-2.6.18-4-iop32x-di, ide-modules-2.6.18-4-iop32x-di Provides: cdrom-core-modules Description: CDROM support This package contains core CDROM support for the Linux kernel. Package: clock-setup Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 76 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 0.15 Depends: cdebconf-udeb, os-prober, tzsetup-udeb Description: set up clock Installer-Menu-Item: 62 Package: debootstrap-udeb Status: install ok installed Priority: required Section: debian-installer Installed-Size: 128 Maintainer: Anthony Towns <[EMAIL PROTECTED]> Version: 0.3.3.2 Depends: libc6 (>= 2.3.5-1), mounted-partitions Description: Bootstrap the Debian system debootstrap is used to create a Debian base system from scratch, without requiring the availability of dpkg or apt. It does this by downloading .deb files from a mirror site, and carefully unpacking them into a directory which can eventually be chrooted into. . debootstrap-udeb is a minimal package used by debian-installer. Package: di-utils-mapdevfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 16 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.45 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49) Description: mapdevfs utility for the debian installer Package: disk-detect Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 64 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.50 Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Provides: harddrive-detection Description: Detect disk drives Installer-Menu-Item: 35 Package: e2fsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 392 Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]> Version: 1.39+1.40-WIP-2006.11.14+dfsg-2 Depends: libblkid1-udeb, libc6 (>= 2.3.5-1) Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. Package: ext3-modules-2.6.18-4-iop32x-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 284 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.10 Depends: kernel-image-2.6.18-4-iop32x-di Provides: ext3-modules Description: EXT3 filesystem support This package contains the EXT3 filesystem module for the Linux kernel. Package: fat-modules-2.6.18-4-iop32x-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 140 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.10 Depends: kernel-image-2.6.18-4-iop32x-di Provides: fat-modules Description: FAT filesystem support This package contains the FAT and VFAT filesystem modules for the Linux kernel. Package: finish-install Status: install ok unpacked Priority: required Section: debian-installer Installed-Size: 108 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 2.9 Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system Provides: prebaseconfig Description: Finish the installation and reboot Installer-Menu-Item: 78 Package: flash-kernel-installer Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 36 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.1 Depends: cdebconf-udeb, base-installer Provides: bootable-system Description: Configure flash to boot the system Installer-Menu-Item: 73 Package: glantank-installer Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 36 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.4 Depends: cdebconf-udeb, kernel-installer, archdetect Provides: bootable-system Description: Make GLAN Tank bootable This package will install scripts to make the GLAN Tank bootable. Installer-Menu-Item: 73 Package: ide-core-modules-2.6.18-4-iop32x-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 160 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.10 Depends: kernel-image-2.6.18-4-iop32x-di Provides: ide-core-modules Description: IDE support This package contains core IDE support for the Linux kernel. Package: ide-modules-2.6.18-4-iop32x-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 368 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.10 Depends: kernel-image-2.6.18-4-iop32x-di, ide-core-modules-2.6.18-4-iop32x-di Provides: ide-modules Description: IDE drivers This package contains IDE drivers for the Linux kernel. Package: jfsutils-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 1012 Maintainer: Stefan Hornburg (Racke) <[EMAIL PROTECTED]> Version: 1.1.11-1 Depends: libc6 (>= 2.3.5-1), libuuid1-udeb Description: A stripped-down version of jfsutils, for debian-installer This package is a jfsutils package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: libblkid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 40 Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]> Version: 1.39+1.40-WIP-2006.11.14+dfsg-2 Depends: libc6 (>= 2.3.5-1) Provides: libblkid1 Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libc6-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 1836 Maintainer: GNU Libc Maintainers <[EMAIL PROTECTED]> Version: 2.3.6.ds1-13 Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2 Description: GNU C Library: Shared libraries - udeb Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. . This package contains a minimal set of libraries needed for the Debian installer. Do not install it on a normal system. Package: libdevmapper1.02-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 63 Maintainer: Debian LVM Team <[EMAIL PROTECTED]> Version: 2:1.02.08-1 Depends: libc6 (>= 2.3.5-1) Provides: libdevmapper1.02 Description: The Linux Kernel Device Mapper userspace library This is a udeb, or a microdeb, for the debian-installer. . The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. Package: libparted1.7-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 356 Maintainer: Parted Maintainer Team <[EMAIL PROTECTED]> Version: 1.7.1-5.1 Depends: libc6 (>= 2.3.5-1), libuuid1-udeb Provides: libparted1.7-1 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. This is a cut-down package with no normal documentation intended to be used in debian-installer. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . Note that ReiserFS support is only enabled if you install the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been removed from sarge, ReiserFS support is not compiled in the default package. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: libuuid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 24 Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]> Version: 1.39+1.40-WIP-2006.11.14+dfsg-2 Depends: libc6 (>= 2.3.5-1) Provides: libuuid1 Description: universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's). See RFC 4122 for more information. . This is a minimal package for debian-installer. Package: localechooser Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 416 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.37 Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15) Description: choose language/country/locale Installer-Menu-Item: 10 Package: loop-modules-2.6.18-4-iop32x-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.10 Depends: kernel-image-2.6.18-4-iop32x-di Provides: loop-modules Description: Loopback filesystem support This package contains loopback filesystem support for the Linux kernel. Package: lvm2-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 475 Maintainer: Debian LVM Team <[EMAIL PROTECTED]> Version: 2.02.06-4 Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2) Description: The Linux Logical Volume Manager This is a udeb, or a microdeb, for the debian-installer. . This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM supports enterprise level volume management of disk and disk subsystems by grouping arbitrary disks into volume groups. The total capacity of volume groups can be allocated to logical volumes, which are accessed as regular block devices. Package: md-modules-2.6.18-4-iop32x-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 464 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.10 Depends: kernel-image-2.6.18-4-iop32x-di Provides: md-modules Description: RAID and LVM support This package contains RAID and LVM modules for the Linux kernel. Package: mdadm-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 158 Maintainer: Debian mdadm maintainers <[EMAIL PROTECTED]> Version: 2.5.6-9 Depends: libc6 (>= 2.3.5-1) Description: tool to administer Linux MD arrays (software RAID) mdadm is a program that can be used to create, manage, and monitor MD arrays (e.g. software RAID, multipath devices). . mdadm-udeb is a minimal package used by the debian-installer. Package: mdcfg-utils Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 412 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.21 Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions Description: Configure MD devices Use this module to configure the MD devices. Package: mkreiserfs-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 168 Maintainer: Ed Boraas <[EMAIL PROTECTED]> Version: 1:3.6.19-4 Depends: libc6 (>= 2.3.5-1), libuuid1-udeb Description: User-level tools for ReiserFS filesystems This installer module contains the utility to create ReiserFS filesystems. . Homepage: http://www.namesys.com/ Package: nobootloader Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 168 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.17 Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs Provides: bootable-system Description: Don't install any bootloader. This package will skip installing a boot-loader Installer-Menu-Item: 77 Package: os-prober-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 33 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.17 Depends: di-utils-mapdevfs, anna (>= 1.16) Provides: os-prober Description: utility to detect other OSes on a set of drives This package is to be used by boot loader installers to detect other OSes available on a system, in a generic format, which it can then adapt to its own configuration format. Package: partconf Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 332 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.21 Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1), partconf-mkfstab Recommends: partitioned-harddrives Provides: made-filesystems, made-swapspace, mounted-partitions, created-fstab Description: Configure and Mount Partitions User friendly debian-installer program for creating file systems, swap partitions and mounting them in /target Installer-Menu-Item: 45 Package: partconf-find-partitions Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 32 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.21 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1) Description: debian-installer utility for finding partitions Helper program for finding partitions and detecting their size and existing file system. Package: partconf-mkfstab Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 56 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.21 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1) Description: debian-installer utility for creating fstab file Helper program for creating fstab files in the new installed debian system. Package: parted-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 57 Maintainer: Parted Maintainer Team <[EMAIL PROTECTED]> Version: 1.7.1-5.1 Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1) Provides: parted Description: The GNU Parted disk partition resizing program GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package is similar to the "big" parted package, but has less cosmetical features resulting in smaller binary. Intended to be used in debian-installer. . . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: partitioner Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 92 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 0.39 Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.49), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, harddrive-detection, acorn-fdisk-udeb Provides: partitioned-harddrives Description: Partition a hard drive Use this module to partition the physical disks in the system. Installer-Menu-Item: 43 Package: partman-auto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 424 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 68 Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3 Description: Automatically partition storage devices (partman) Package: partman-auto-crypto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 48 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 5 Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87) Description: Automatically partition storage devices using crypto and LVM Package: partman-auto-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 164 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 22 Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb Description: Automatically partition storage devices using LVM Package: partman-auto-raid Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 68 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 5 Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md Description: Allow preseeded RAID installs Package: partman-base Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 876 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 105 Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15) Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab Description: Partition the storage devices (partman) Installer-Menu-Item: 42 Package: partman-basicfilesystems Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 600 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 53 Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext2, linux-swap, fat16 and fat32 Package: partman-basicmethods Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 132 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 34 Depends: cdebconf-udeb Provides: partman-method Description: Basic partition usage methods for partman This package provides partman with two methods to use partitions. The first is to format the partition. The second is to keep and use the existing data in the partition as it is. Package: partman-crypto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 880 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 20 Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb Description: Add to partman support for block device encryption Package: partman-ext3 Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 228 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 46 Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext3 Package: partman-jfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 272 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 21 Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add support for jfs to partman Package: partman-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 732 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 53 Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb Description: Adds support for LVM to partman Package: partman-md Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 160 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 34 Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87) Description: Add to partman support for MD Package: partman-partitioning Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 380 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 48 Depends: cdebconf-udeb Description: Partitioning operations for partman This udeb provides partman with editing operations for creation of new partitions, deletion of partitions and initialisation of the partition table. Package: partman-reiserfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 236 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 35 Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for reiserfs Package: partman-target Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 320 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 49 Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs Description: Provides partman with ability to prepare /target This udeb allows the user to choose how partitions should be used. Package: partman-xfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 224 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 33 Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for xfs Package: pkgsel Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 32 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 0.12 Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20) Description: Select and install packages Installer-Menu-Item: 70 Package: reiserfs-modules-2.6.18-4-iop32x-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 328 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.10 Depends: kernel-image-2.6.18-4-iop32x-di Provides: reiserfs-modules Description: Reiser filesystem support This package contains the Reiser filesystem module for the Linux kernel. Package: sata-modules-2.6.18-4-iop32x-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 408 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.10 Depends: kernel-image-2.6.18-4-iop32x-di, scsi-core-modules-2.6.18-4-iop32x-di Provides: sata-modules Description: SATA drivers This package contains SATA drivers for the Linux kernel. Package: scsi-core-modules-2.6.18-4-iop32x-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 184 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.10 Depends: kernel-image-2.6.18-4-iop32x-di Provides: scsi-core-modules Description: Core SCSI subsystem This package contains the core SCSI subsystem for the Linux kernel. Package: tzsetup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 308 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1:0.16 Depends: cdebconf-udeb, localechooser Description: choose timezone Installer-Menu-Item: 62 Package: usb-storage-modules-2.6.18-4-iop32x-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 96 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.10 Depends: ide-core-modules-2.6.18-4-iop32x-di, scsi-core-modules-2.6.18-4-iop32x-di, usb-modules-2.6.18-4-iop32x-di Provides: usb-storage-modules Description: USB storage support This package contains the USB storage driver for the Linux kernel. Package: user-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 360 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.11 Depends: cdebconf-udeb Description: Set up users and passwords Installer-Menu-Item: 63 Package: xfsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 284 Maintainer: Nathan Scott <[EMAIL PROTECTED]> Version: 2.8.11-1 Depends: libc6 (>= 2.3.5-1), libuuid1-udeb Description: A stripped-down version of xfsprogs, for debian-installer This package is an xfsprogs package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: lvmcfg Status: install ok unpacked Priority: optional Section: debian-installer Installed-Size: 44 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.16 Depends: cdebconf-udeb, partitioned-harddrives, partconf-find-partitions Description: Configure the Logical Volume Manager Installer-Menu-Item: 44 Package: mdcfg Status: install ok unpacked Priority: optional Section: debian-installer Installed-Size: 44 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.21 Depends: partitioned-harddrives Description: Configure MD devices Use this module to configure the MD devices. Installer-Menu-Item: 45 -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: arm (armv5tel) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-4-iop32x Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]