Package: linux-image-2.6.21-2-686
Version: 2.6.21-6
Severity: critical
Justification: breaks the whole system
*** Please type your report below this line ***
After upgrading from linux-image-2.6.18-4-686 to linux-image-2.6.21-2-686, the
system
fails to boot because the kernel now suddenly sees hard drive as /dev/sda while
linux-image-2.6.18-4-686 saw the same hard drive as /dev/hda. After editing
/boot/grub/menu.lst and changing /dev/hda5 to /dev/sda5, (
title Debian GNU/Linux, kernel 2.6.22-1-686
root (hd0,4)
kernel /boot/vmlinuz-2.6.22-1-686 root=/dev/sda5 ro vga=791
video=vesa:ywrap,mtrr
initrd /boot/initrd.img-2.6.22-1-686
savedefault
) the system boots O.K with linux-image-2.6.21-2-686, but fails to enable dma
for /dev/sda.
So I installed linux-source-2.6.22 and compiled a new kernel with my own custom
configuration,
which saw the hard drive again as /dev/hda and enabled dma without problems.
Still, I'd
much prefer to use Debian's linux-image packages instead of custom compiled
kernels.
I also tried linux-image-2.6.22-1-686, which acts just like
linux-image-2.6.21-2-686.
Vesa
lspci:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device 0649 (rev
10)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO]
(rev 48)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97
Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit
Ethernet Adapter
00:05.0 IDE interface: Silicon Integrated Systems [SiS] 182 SATA/RAID
Controller (rev 01)
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller
(rev 80)
03:00.0 VGA compatible controller: nVidia Corporation NV44 [GeForce 6200 SE
TurboCache (TM)] (rev a1)
dmesg for linux-image-2.6.21-2-686 after editing /boot/grub/menu.lst (as
described above):
Linux version 2.6.21-2-686 (Debian 2.6.21-6) ([EMAIL PROTECTED]) (gcc version
4.1.3 20070629 (prerelease) (Debian 4.1.2-13)) #
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end:
000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end:
00000000000a0000 type: 2
copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end:
0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000003fe10000 end:
000000003ff10000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000003ff10000 size: 0000000000010000 end:
000000003ff20000 type: 3
copy_e820_map() start: 000000003ff20000 size: 00000000000e0000 end:
0000000040000000 type: 4
copy_e820_map() start: 00000000ff7c0000 size: 0000000000840000 end:
0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff10000 (usable)
BIOS-e820: 000000003ff10000 - 000000003ff20000 (ACPI data)
BIOS-e820: 000000003ff20000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 261904) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 261904
early_node_map[1] active PFN ranges
0: 0 -> 261904
On node 0 totalpages: 261904
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 254 pages used for memmap
HighMem zone: 32274 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP 000FB510, 0024 (r2 ACPIAM)
ACPI: XSDT 3FF10100, 003C (r1 A M I OEMXSDT 7000511 MSFT 97)
ACPI: FACP 3FF10290, 00F4 (r3 A M I OEMFACP 7000511 MSFT 97)
ACPI: DSDT 3FF10430, 4054 (r1 A0231 A0231000 0 INTL 2002026)
ACPI: FACS 3FF20000, 0040
ACPI: APIC 3FF10390, 005C (r1 A M I OEMAPIC 7000511 MSFT 97)
ACPI: MCFG 3FF103F0, 003C (r1 A M I OEMMCFG 7000511 MSFT 97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bf7c0000)
Built 1 zonelists. Total pages: 259858
Kernel command line: root=/dev/sda5 ro vga=791 video=vesa:ywrap,mtrr
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2931.846 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1029600k/1047616k available (1661k kernel code, 17244k reserved, 636k
data, 212k init, 130112k highmem)
virtual kernel memory layout:
fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0345000 - 0xc037a000 ( 212 kB)
.data : 0xc029f5e5 - 0xc033e834 ( 636 kB)
.text : 0xc0100000 - 0xc029f5e5 (1661 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5867.63 BogoMIPS (lpj=11735276)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000651d
00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 20000000 00000000 00003180 0000651d
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Celeron(R) CPU 2.93GHz stepping 01
Total of 1 processors activated (5867.63 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:03:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
pnp: 00:0a: ioport range 0x480-0x487 has been reserved
pnp: 00:0a: ioport range 0xd00-0xd7f has been reserved
pnp: 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved
pnp: 00:0b: iomem range 0xffe80000-0xffefffff could not be reserved
pnp: 00:0b: iomem range 0xffb80000-0xffbfffff could not be reserved
pnp: 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:0c: iomem range 0xfff80000-0xffffffff could not be reserved
pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: faa00000-feafffff
PREFETCH window: bfe00000-dfefffff
PCI: Bridge: 0000:00:06.0
IO window: b000-bfff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: a000-afff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 5332k freed
audit: initializing netlink socket (disabled)
audit(1187920232.744:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total
65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:d2d0
vesafb: pmi: set display start = c00cd306, set palette = c00cd370
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf
3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 212k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not
present [20070126]
SCSI subsystem initialized
libata version 2.20 loaded.
pata_sis 0000:00:02.5: version 0.5.0
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
scsi0 : pata_sis
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ata1.00: ATA-6: ST3160021A, 8.01, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi1 : pata_sis
ieee1394: Initialized config rom entry `ip1394'
FDC 0 is a post-1991 82077
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA ST3160021A 8.01 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM PHILIPS DVD8631 2X16 PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 16, io mem 0xfebfb000
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 17
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 17, io mem 0xfebfc000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 18
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.2: irq 18, io mem 0xfebfd000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-3: new full speed USB device using ohci_hcd and address 2
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 19, io mem 0xfebfe000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[febff800-febfffff]
Max Packet=[2048] IR/IT contexts=[4/8]
sata_sis 0000:00:05.0: version 0.7
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 21
sata_sis 0000:00:05.0: Detected SiS 182/965 chipset
ata3: SATA max UDMA/133 cmd 0x0001e880 ctl 0x0001e802 bmdma 0x0001e080 irq 21
ata4: SATA max UDMA/133 cmd 0x0001e480 ctl 0x0001e402 bmdma 0x0001e088 irq 21
scsi2 : sata_sis
usb 4-7: new high speed USB device using ehci_hcd and address 2
ata3: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0001e887
scsi3 : sata_sis
usb 4-7: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
ata4: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0001e487
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4
sd 0:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000054c6b0]
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
input: PC Speaker as /class/input/input1
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
scsi 4:0:0:4: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi removable disk sdb
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:1: Attached scsi removable disk sdc
sd 4:0:0:1: Attached scsi generic sg3 type 0
sis190 Gigabit Ethernet driver 1.2 loaded.
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:04.0 to 64
sd 4:0:0:2: Attached scsi removable disk sdd
sd 4:0:0:2: Attached scsi generic sg4 type 0
0000:00:04.0: Read MAC address from APC.
sd 4:0:0:3: Attached scsi removable disk sde
sd 4:0:0:3: Attached scsi generic sg5 type 0
sd 4:0:0:4: Attached scsi removable disk sdf
sd 4:0:0:4: Attached scsi generic sg6 type 0
0000:00:04.0: Realtek PHY RTL8201 transceiver at address 1.
input: PS2++ Logitech Wheel Mouse as /class/input/input2
0000:00:04.0: Using transceiver at address 1 as default.
0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8cfc400 (IRQ: 22),
00:13:d4:e5:01:d0
eth1: GMII mode.
eth1: Enabling Auto-negotiation.
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 20
intel8x0_measure_ac97_clock: measured 52378 usecs
intel8x0: clocking to 48000
EXT3 FS on sda5, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED]
fuse init (API version 7.8)
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8184 buckets, 65472 max)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
PPP generic driver version 2.4.2
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
eth1: mii ext = 0000.
eth1: mii lpa = 41e1 adv = 01e1.
eth1: link on 100 Mbps Full Duplex mode.
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
PPP BSD Compression module registered
eth1: no IPv6 routers present
-- Package-specific info:
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.22-2007.08.13
Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to fi_FI.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.21-2-686 depends on:
ii initramfs-tools [linux-initr 0.90 tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.21-2-686 recommends:
ii libc6-i686 2.6.1-1 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.21-2-686/preinst/elilo-initrd-2.6.21-2-686: true
linux-image-2.6.21-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.21-2-686/prerm/would-invalidate-boot-loader-2.6.21-2-686: true
linux-image-2.6.21-2-686/preinst/already-running-this-2.6.21-2-686:
linux-image-2.6.21-2-686/postinst/old-initrd-link-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/bootloader-error-2.6.21-2-686:
linux-image-2.6.21-2-686/preinst/lilo-initrd-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/depmod-error-initrd-2.6.21-2-686: false
linux-image-2.6.21-2-686/preinst/bootloader-initrd-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/bootloader-test-error-2.6.21-2-686:
linux-image-2.6.21-2-686/postinst/old-dir-initrd-link-2.6.21-2-686: true
linux-image-2.6.21-2-686/prerm/removing-running-kernel-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.21-2-686/preinst/failed-to-move-modules-2.6.21-2-686:
linux-image-2.6.21-2-686/preinst/abort-overwrite-2.6.21-2-686:
linux-image-2.6.21-2-686/preinst/initrd-2.6.21-2-686:
linux-image-2.6.21-2-686/preinst/overwriting-modules-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/create-kimage-link-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/depmod-error-2.6.21-2-686: false
linux-image-2.6.21-2-686/postinst/old-system-map-link-2.6.21-2-686: true
linux-image-2.6.21-2-686/preinst/abort-install-2.6.21-2-686:
...................................................................
Luukku Plus paketilla pääset eroon tila- ja turvallisuusongelmista.
Hanki Luukku Plus ja helpotat elämääsi. http://www.mtv3.fi/luukku
