Package: installation-reports INSTALL REPORT
Debian-installer-version: 20April05 http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc3/sarge-i386-netinst.iso uname -a: Linux sc0h8r 2.6.8-2-386 #1 Mon Jan 24 03:01:58 EST 2005 i686 GNU/Linux Date: 19April05 @ 22:00 Mountain Time Method: How did you install? network What did you boot off? netinst.iso cd If network install, from where? deb http://mirrors.xmission.com/debian/ testing main Proxied? no Machine: homemade tower kt7-raid board Processor: 1.2Ghz AMD Duron Memory: 256meg Root Device: IDE WDC WD400BB-75DEA0, ATA DISK drive Root Size/partition table: 10 gig (no other partition) Output of sfdisk -l: Disk /dev/hda: 77504 cylinders, 16 heads, 63 sectors/track Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. Warning: The partition table looks like it was made for C/H/S=*/255/63 (instead of 77504/16/63). For this listing I'll assume that geometry. Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/hda1 * 0+ 454 455- 3654756 b W95 FAT32 (Windows 2kPRO) /dev/hda2 782 4862 4081 32780632+ f W95 Ext'd (LBA) /dev/hda3 455 781 327 2626627+ 83 Linux (empty partition) /dev/hda4 0 - 0 0 0 Empty /dev/hda5 782+ 2356 1575- 12651156 b W95 FAT32 /dev/hda6 3635+ 4399 765- 6144831 83 Linux (SuSE 8.2) /dev/hda7 4400+ 4416 17- 136521 82 Linux swap /dev/hda8 4417+ 4862 446- 3582463+ 83 Linux (Debian) /dev/hda9 * 2357+ 3634 1278- 10265503+ 83 Linux (Debian-sarge--new netinstall) Output of lspci and lspci -n: lspci: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) 0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 0000:00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) 0000:00:0b.0 VGA compatible controller: ATI Technologies Inc Rage 128 PP/PRO TMDS [Xpert 128] 0000:00:11.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) lspci -n: 0000:00:00.0 0600: 1106:0305 (rev 03) 0000:00:01.0 0604: 1106:8305 0000:00:07.0 0601: 1106:0686 (rev 40) 0000:00:07.1 0101: 1106:0571 (rev 06) 0000:00:07.2 0c03: 1106:3038 (rev 16) 0000:00:07.3 0c03: 1106:3038 (rev 16) 0000:00:07.4 0680: 1106:3057 (rev 40) 0000:00:09.0 0200: 10b7:9055 (rev 30) 0000:00:0b.0 0300: 1002:5050 0000:00:11.0 0401: 1274:5880 (rev 02) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: <Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install.> Install was fine. The only minor problem was after creating space on the logical partition to install Debian, I had to sit and think the partition number so I could tell the installer which partition to start grub since I didn't install it on MBR. I didn't care for the fonts when KDE booted. They were very jagged. I am still having problems setting up my printer (Brother HL-1440), but that is under cups and nothing to do with installation. Overall, very smooth installation process and I have used Debian since about .9 or something like that! Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- I have and use: FreeBSD, OS/2, SuSE, Fedora Mandrake, M$2kpro, OpenBSD Debian, Slackware & Amiga ICQ# 54186124 God's best to you! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
