Package: dvbsnoop Version: 1.4.50-1 Severity: minor Tags: patch
Found some typos in '/usr/share/man/man1/dvbsnoop.1.gz', see attached '.diff'. The one I'm not sure about is 'elemtary', which looks like 'elementary': Depending on the decoding mode this might be transport stream, packetized elem(en)tary stream or sections. I'm not a video expert -- is there such thing as an "elementary stream"? Hope this helps... -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-2-k7 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/dash Versions of packages dvbsnoop depends on: ii libc6 2.6.1-5 GNU C Library: Shared libraries dvbsnoop recommends no packages. -- no debconf information
--- dvbsnoop.1 2007-08-31 16:28:27.000000000 -0400 +++ /tmp/dvbsnoop.1 2007-10-06 02:02:27.000000000 -0400 @@ -16,7 +16,7 @@ .br DVBSNOOP is a text based DVB and MPEG stream analyzer for viewing/debugging stream information, e.g. send via digital TV. You may also use dvbsnoop to analyze mpeg compliant streams stored on DVD or other media. Dvbsnoop analyzes and displays MPEG, DVB, DSM\-CC, MHP, etc. data and structures in human readable form. Possible stream types are TS (tranport streams), PS (program streams), PES (packetized elementary streams) or SECTIONS (service information streams). -DVBSNOOP also has some additional functionallity to analyze receiver (set top box, dvb card) data, bandwidth of a transport stream, pid scan, etc. +DVBSNOOP also has some additional functionality to analyze receiver (set top box, dvb card) data, bandwidth of a transport stream, pid scan, etc. Using special network programs like netcat (nc), dvbsnoop may also be used to do remote sniffing and decoding. For post-processing dvbsnoop output, you may use the full range of unix tools and scripting languages (grep, perl, python, mrtg, gnuplot, etc.). @@ -49,7 +49,7 @@ e.g. teletext, audio, video, data pidscan \= scan and display PIDs on tuned transponder/frequency. - bandwith \= bandwidth messurement mode + bandwidth \= bandwidth measurement mode for selected pid. signal \= display tuner signal reception info. feinfo \= display tuner data (frontend info). @@ -89,7 +89,7 @@ .TP .B \-ph \<mode\> .br -Specify print hex putput verbose mode: +Specify print hex output verbose mode: 0\=no hexdump output, 1\=hex output, 2\=hex line, 3\=ascii line, 4\=alternate hex output. (default is 4) .TP @@ -157,7 +157,7 @@ .TP .B \-buffersize \<kb\> .br -Set demux read buffersize in KBytes. +Set demux read buffer size in KBytes. Default is 0 (use internal default value). .TP @@ -171,7 +171,7 @@ .br Read binary stream data from file instead of the demux device. <file> \= '-' reads from standard input. -Depending on the decoding mode this might be transport stream, packetized elemtary stream or sections. +Depending on the decoding mode this might be transport stream, packetized elementary stream or sections. Please aware, that you cannot e.g. use \-s pes or \-s sec on a saved transport stream. The decoding/snooping mode has to match the saved stream format! @@ -195,7 +195,7 @@ You may use multibyte filters like: 0x4E.01.20.FF The filter comprises e.g. 16 bytes covering byte 0 and byte 3..17 in a section, thus excluding bytes 1 and 2 (the length field of a section). -To check the filtervalues use \-pd 9. +To check the filter values use \-pd 9. .TP .B \-m \<mask\> .br @@ -204,7 +204,7 @@ You may use multibyte filters like: 0xFF.F0.FE.FF The filter comprises e.g. 16 bytes covering byte 0 and byte 3..17 in a section, thus excluding bytes 1 and 2 (the length field of a section). -To check the filtervalues use \-pd 9. +To check the filter values use \-pd 9. .TP .B \-N \<value\> @@ -241,7 +241,7 @@ .B \-spiderpid .br Snoop referenced section PIDs. -This option recursivly reads all PIDs referenced by a section. This option also sets number of packets to be read to 1 (sets \-n 1). To read more packets for a pid, use \-n \<count\> after specifying \-spiderpid. +This option recursively reads all PIDs referenced by a section. This option also sets number of packets to be read to 1 (sets \-n 1). To read more packets for a pid, use \-n \<count\> after specifying \-spiderpid. .TP .B \-privateprovider \<id\> .br @@ -427,7 +427,7 @@ Do remote decoding of dvb data over network using dvbsnoop and netcat: streaming site: dvbsnoop \-s ts 0x0065 \-b \| nc \-q ServerName 31000 - reveiving site: + receiving site: nc \-l \-p 31000 \| dvbsnoop \-nph \-s ts \-tssubdecode \-if \- You may also use e.g. dvbtools for sending dvb data over a network: