mii-diag mii-tool not working with nforce3 or kernel 2.6.3
# mii-tool eth3
SIOCGMIIPHY on 'eth3' failed: Operation not supported
ethtool seems to have no problem:
# ethtool -i eth3
driver: forcedeth
version: 0.60
firmware-version:
bus-info: 0000:00:05.0
vdr:~/work/flash# ethtool eth3
Settings for eth3:
Supported ports: [ MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 1
Transceiver: external
Auto-negotiation: on
Supports Wake-on: g
Wake-on: d
Link detected: yes
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
