reopen 399471 found 399471 9:1.1.6-1 thanks Reopening as this was never really confirmed fixed, just closed due to lack of confirmation.
I get this on one particular system; wodim fails to write CDR media which work fine on other systems. DVD+R media can be written on the system that fails with CDRs. [EMAIL PROTECTED]:~$ wodim dev=/dev/cdrw4 speed=48 -v CBX.iso -v -v wodim: No write mode specified. wodim: Asuming -tao mode. wodim: Future versions of wodim may have different drive dependent defaults. TOC Type: 1 = CD-ROM wodim: Operation not permitted. WARNING: Cannot set RR-scheduler WARNING: Cannot set priority using setpriority(),increased risk for buffer underruns. scsidev: '/dev/cdrw4' devname: '/dev/cdrw4' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Warning: Cannot gain SYS_RAWIO capability: Operation not permitted Possible reason: wodim not installed SUID root. Wodim version: 1.1.6 Using libusal version 'Cdrkit-1.1.6'. SCSI buffer size: 64512 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identification : 'DVD+-RW GWA4164B' Revision : 'D108' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0000 (Reserved/Unknown) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) Profile: 0x0008 (CD-ROM) Drive current speed: 48 Drive default speed: 48 Drive max speed : 48 Selected speed : 48 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1076231520 = 1051007 KB Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. Drive DMA Speed: 69367 kB/s 394x CD 50x DVD FIFO size : 12582912 = 12288 KB Track 01: data 135 MB track: 1 start: 0 pregap: 150 Total size: 156 MB (15:28.16) = 69612 sectors Lout start: 156 MB (15:30/12) = 69612 sectors 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 AA 01 14 00 0F 1E 0C Track 1 start 0 Track 2 start 69612 41 00 A0 00 00 00 00 01 00 00 00 00 41 00 A1 00 00 00 00 01 00 00 00 00 41 00 A2 00 00 00 00 15 30 12 00 00 41 00 01 00 00 00 00 00 02 00 00 00 Errno: 0 (Success), test unit ready scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 3A 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 40s wodim: No disk / Wrong disk! -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (900, 'testing'), (10, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.20-1-amd64 (SMP w/2 CPU cores) Locale: LANG=nl_BE.UTF-8, LC_CTYPE=nl_BE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages wodim depends on: ii libc6 2.7-3 GNU C Library: Shared libraries ii libcap1 1:1.10-14 support for getting/setting POSIX. Versions of packages wodim recommends: ii genisoimage 9:1.1.6-1 Creates ISO-9660 CD-ROM filesystem -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
