Dear Debian maintainer, On Thursday, January 10, 2008, I sent you a notification about the beginning of a review action on debconf templates for hddtemp.
Then, I sent you a bug report with rewritten templates and announcing the beginning of the second phase of this action: call for translation updates. Translators have been working hard and here is now the result of their efforts. Please consider using it EVEN if you committed files to your development tree as long as they were reported. The attached tarball contains: - debian/changelog with the list of changes - debian/control with rewrites of packages' descriptions - debian/<templates> with all the rewritten templates file(s) - debian/po/*.po with all PO files (existing ones and new ones) As said, please use *at least* the PO files as provided here, preferrably over those sent by translators in their bug reports. All of them have been checked and reformatted. In some cases, formatting errors have been corrected. The patch.rfr file contains a patch for the templates and control file(s) alone. Please note that this patch applies to the templates and control file(s) of your package as of Thursday, January 10, 2008. If your package was updated in the meantime, I may have updated my reference copy....but I also may have missed that. This is indeed why I suggested you do not modified such files while the review process was running, remember..:-) It is now safe to upload a new package version with these changes. Please notify me of your intents with regards to this. There is of course no hurry to update your package but feel free to contact me in case you would need sponsoring or any other action to fix this. --
patch.tar.gz
Description: Binary data
--- hddtemp.old/debian/templates 2007-12-20 05:54:16.106116830 +0100 +++ hddtemp/debian/templates 2008-01-25 07:28:14.473193955 +0100 @@ -1,52 +1,63 @@ +# These templates have been reviewed by the debian-l10n-english +# team +# +# If modifications/additions/rewording are needed, please ask +# [EMAIL PROTECTED] for advice. +# +# Even minor modifications require translation updates and such +# changes should be coordinated with translators and reviewers. + Template: hddtemp/SUID_bit Type: boolean Default: false -_Description: Do you want /usr/sbin/hddtemp to be installed SUID root? - You have the option of installing hddtemp with the SUID bit set. +_Description: Should /usr/sbin/hddtemp be installed SUID root? + You have the option of installing hddtemp with the SUID bit set, + allowing it to be run (reporting hard drive temperatures) by regular + users and not only the superuser. + . + This could potentially allow hddtemp to be used during an attack + against the computer's security. If in doubt, do not choose this option. . - If you make hddtemp SUID, unprivileged users of your systems will be able - to run it. This could, however, potentially allow hddtemp to be used - during a security attack on your computer. If in doubt, it is suggested - to install it without SUID. If you later change your mind, you can run: - 'dpkg-reconfigure hddtemp'. + This setting can be modified later by running 'dpkg-reconfigure hddtemp'. Template: hddtemp/syslog Type: string Default: 0 -_Description: Interval between two checks: - hddtemp can periodically log the temperature of the hard drive(s) via - the SYSLOG interface. +_Description: Interval between hard drive temperature checks: + The temperature of the hard drive(s) can be logged by hddtemp via + the generic system logging interface. . Please enter a value in seconds corresponding to the interval between - two checks. To disable this feature, simply enter 0. + two checks. To disable this feature, enter 0. Template: hddtemp/daemon Type: boolean Default: false -_Description: Do you want to start the hddtemp daemon on startup? - hddtemp can be run as a daemon, listening on port 7634 for incoming - connections. It is used some by software such as gkrellm to get - the temperature of the hard drives. - . - You have the option of starting the hddtemp daemon automatically on the - computer startup. If in doubt, it is suggested to not start it automatically - on startup. If you later change your mind, you can run: 'dpkg-reconfigure - hddtemp'. +_Description: Should the hddtemp daemon be started at boot? + The hddtemp program can be run as a daemon, listening on port 7634 + for incoming connections. It is used by some software such as gkrellm to get + the temperature of hard drives. + . + You have the option of starting the hddtemp daemon automatically on + system boot. If in doubt, it is suggested to not start it + automatically on boot. + . + This setting can be modified later by running 'dpkg-reconfigure hddtemp'. Template: hddtemp/interface Type: string Default: 127.0.0.1 _Description: Interface to listen on: - hddtemp can listen for incoming connections on a specific interface, or on - all interfaces. + The hddtemp program can listen for incoming connections on a specific + interface, or on all interfaces. . To listen on a specific interface, enter the IP address of that interface - (127.0.0.1 which is the default value corresponds to the lo interface). To - listen on all interfaces, simply enter 0.0.0.0. + (choosing 127.0.0.1 will accept local connections only). To listen on all interfaces, + enter 0.0.0.0. Template: hddtemp/port Type: string Default: 7634 _Description: Port to listen on: - By default, hddtemp listen for incoming connections on port 7634. However - if you don't find this port appropriate, you can enter an other one. + By default, hddtemp listens for incoming connections on port 7634. This + can be changed for another port number. --- hddtemp.old/debian/control 2007-12-20 05:54:16.106116830 +0100 +++ hddtemp/debian/control 2008-01-22 07:33:36.744094835 +0100 @@ -4,17 +4,14 @@ Maintainer: Aurelien Jarno <[EMAIL PROTECTED]> Build-Depends: debhelper (>> 4.1.16), autotools-dev, gettext (>> 0.10.1) Standards-Version: 3.7.2 +Homepage: http://www.guzu.net/linux/hddtemp.php Package: hddtemp Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, lsb-base (>= 3.0-3) Suggests: ksensors Conflicts: ksensors (<< 0.7-8), gkrellm-hddtemp (<< 0.1-9) -Description: Utility to monitor the temperature of your hard drive - hddtemp will give you the temperature of your PATA, SATA or SCSI hard - drive by reading Self-Monitoring Analysis and Reporting Technology - (S.M.A.R.T.) information (on drives that support this feature). Only - modern hard drives have a temperature sensor. - . - Author: Emmanuel Varagnat <[EMAIL PROTECTED]> - Homepage: http://www.guzu.net/linux/hddtemp.php +Description: hard drive temperature monitoring utility + The hddtemp program monitors and reports the temperature of PATA, SATA + or SCSI hard drives by reading Self-Monitoring Analysis and Reporting + Technology (S.M.A.R.T.) information on drives that support this feature. --- hddtemp.old/debian/changelog 2007-12-20 05:54:16.106116830 +0100 +++ hddtemp/debian/changelog 2008-02-13 21:24:21.838676958 +0100 @@ -1,3 +1,22 @@ +hddtemp (0.3-beta15-39) UNRELEASED; urgency=low + + * Debconf templates and debian/control reviewed by the debian-l10n- + english team as part of the Smith review project. Closes: #462483 + * [Debconf translation updates] + * Norwegian Bokmål. Closes: #462799 + * German. Closes: #462843 + * Galician. Closes: #462988 + * Spanish. Closes: #463898 + * Finnish. Closes: #463943 + * Czech. Closes: #464224 + * Russian. Closes: #464566 + * Italian. Closes: #465069 + * Portuguese. Closes: #465135 + * Vietnamese. Closes: #465534 + * French. Closes: #465650 + + -- Christian Perrier <[EMAIL PROTECTED]> Wed, 13 Feb 2008 21:24:21 +0100 + hddtemp (0.3-beta15-38) unstable; urgency=low * Fix typo in hddtemp manpage (closes: bug#444242).
signature.asc
Description: Digital signature
