Package: kernel-image-2.6.8-2-k7 Version: 2.6.8-13 Severity: normal When connecting my USB flash drive to my machine, sometimes it will cause the whole kernel USB system to lock up. After this, anything trying to access the files in /proc/bus/usb freezes in the kernel, and further USB events are ignored until a reboot. The freeze happens maybe once every 3 or 4 times I plug it in, or so.
When the device is plugged in and things go bad, this is what shows in /var/log/messages: May 10 10:08:29 home kernel: usb 1-2: new full speed USB device using address 9 May 10 10:08:29 home kernel: scsi7 : SCSI emulation for USB Mass Storage devices May 10 10:08:29 home kernel: Vendor: JetFlash Model: TS512MJF2B/2L Rev: 2.00 May 10 10:08:29 home kernel: Type: Direct-Access ANSI SCSI revision: 02 May 10 10:08:29 home kernel: sda: Unit Not Ready, sense: May 10 10:08:29 home kernel: Current : sense key Unit Attention May 10 10:08:29 home kernel: Additional sense: Not ready to ready change, medium may have changed May 10 10:08:35 home kernel: usb 1-2: control timeout on ep0in May 10 10:08:40 home hal.hotplug[13459]: timout(10000 ms) waiting for /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0/host7/7:0:0:0 May 10 10:08:40 home hal.hotplug[13461]: timout(10000 ms) waiting for /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0 May 10 10:08:40 home kernel: usb 1-2: control timeout on ep0in May 10 10:08:41 home usb.agent[13539]: usb-storage: already loaded May 10 10:08:50 home scsi.agent[13535]: Attribute /sys/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0/host7/7:0:0:0/type does not exist ...and nothing more ever happens with the USB system after that until the next reboot. For the sake of comparison, this is what a 'proper' connection of the USB device produces (everything just the same except it works this time): May 10 00:25:58 home kernel: usb 1-2: new full speed USB device using address 8 May 10 00:25:58 home kernel: scsi6 : SCSI emulation for USB Mass Storage devices May 10 00:25:58 home kernel: Vendor: JetFlash Model: TS512MJF2B/2L Rev: 2.00 May 10 00:25:58 home kernel: Type: Direct-Access ANSI SCSI revision: 02 May 10 00:25:59 home kernel: sda: Unit Not Ready, sense: May 10 00:25:59 home kernel: Current : sense key Unit Attention May 10 00:25:59 home kernel: Additional sense: Not ready to ready change, medium may have changed May 10 00:25:59 home kernel: sda : READ CAPACITY failed. May 10 00:25:59 home kernel: sda : status=1, message=00, host=0, driver=08 May 10 00:25:59 home kernel: Current sd: sense key Unit Attention May 10 00:25:59 home kernel: Additional sense: Not ready to ready change, medium may have changed May 10 00:25:59 home kernel: sda: assuming Write Enabled May 10 00:25:59 home kernel: /dev/scsi/host6/bus0/target0/lun0: p1 May 10 00:25:59 home kernel: Attached scsi removable disk sda at scsi6, channel 0, id 0, lun 0 May 10 00:26:00 home scsi.agent[29544]: sd_mod: loaded sucessfully (for disk) May 10 00:26:01 home usb.agent[29545]: usb-storage: already loaded -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.8-2-k7 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages kernel-image-2.6.8-2-k7 depends on: ii coreutils [fileutils] 5.2.1-2 The GNU core utilities ii fileutils 5.2.1-2 The GNU file management utilities ii initrd-tools 0.1.78 tools to create initrd image for p ii module-init-tools 3.2-pre1-2 tools for managing Linux kernel mo -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]