Package: kvm Version: 60+dfsg-1 Severity: normal
My kvm host is a Dell with an Opteron processor. The host is a Debian sid. Installation (of etch via netinst) went fine but, after upgrading the host to sid, the kernel 2.6.24-1-amd64 boots but cannot mount the root. Here is the complete log: Initializing cgroup subsys cpuset Linux version 2.6.24-1-amd64 (Debian 2.6.24-4) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Mon Feb 11 13:47:43 UTC 2008 Command line: root=/dev/hda1 ro console=ttyS0,115200 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000fffbd000 - 0000000100000000 (reserved) end_pfn_map = 1048576 DMI not present or invalid. ACPI: RSDP 000FAD00, 0014 (r0 QEMU ) ACPI: RSDT 7FFF0000, 002C (r1 QEMU QEMURSDT 1 QEMU 1) ACPI: FACP 7FFF002C, 0074 (r1 QEMU QEMUFACP 1 QEMU 1) ACPI: DSDT 7FFF0100, 0938 (r1 BXPC BXDSDT 1 INTL 20061109) ACPI: FACS 7FFF00C0, 0040 ACPI: APIC 7FFF0A38, 0068 (r1 QEMU QEMUAPIC 1 QEMU 1) No NUMA configuration found Faking a node at 0000000000000000-000000007fff0000 Bootmem setup node 0 0000000000000000-000000007fff0000 No mptable found. Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524272 ACPI: PM-Timer IO Port: 0xb008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000 swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ffbd000) SMP: Allowing 1 CPUs, 0 hotplug CPUs PERCPU: Allocating 34400 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 515944 Policy zone: DMA32 Kernel command line: root=/dev/hda1 ro console=ttyS0,115200 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER time.c: Detected 2793.104 MHz processor. Console: colour VGA+ 80x25 console [ttyS0] enabled Checking aperture... Memory: 2058152k/2097088k available (2143k kernel code, 38548k reserved, 1003k data, 316k init) Calibrating delay using timer specific routine.. 11195.04 BogoMIPS (lpj=22390092) Security Framework initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 SMP alternatives: switching to UP code Freeing SMP alternatives: 25k freed ACPI: Core revision 20070126 Using local APIC timer interrupts. Detected 62.500 MHz APIC timer. Brought up 1 CPUs net_namespace: 120 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region b000-b03f claimed by PIIX4 ACPI PCI quirk: region b100-b10f claimed by PIIX4 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 6 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 PCI-GART: No AMD northbridge found. Time: tsc clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5446k freed audit: initializing netlink socket (disabled) audit(1208162443.597:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. PCI: PIIX3: Enabling Passive Release on 0000:00:01.0 Activating ISA DMA hang workarounds. Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 registered taskstats version 1 Freeing unused kernel memory: 316k freed Loading, please wait... input: AT Translated Set 2 keyboard as /class/input/input1 /init: line 11: mount: not found /init: line 12: mount: not found /init: line 20: mount: not found /init: line 22: mknod: not found cat: can't open '/proc/cmdline': No such file or directory cat: can't open '/proc/cmdline': No such file or directory /scripts/init-top/framebuffer: line 97: mknod: not found /scripts/init-top/framebuffer: line 100: mknod: not found /scripts/init-top/framebuffer: line 100: mknod: not found /scripts/init-top/framebuffer: line 100: mknod: not found /scripts/init-top/framebuffer: line 100: mknod: not found /scripts/init-top/framebuffer: line 100: mknod: not found /scripts/init-top/framebuffer: line 100: mknod: not found /scripts/init-top/framebuffer: line 100: mknod: not found /scripts/init-top/framebuffer: line 100: mknod: not found /scripts/init-top/framebuffer: line 100: mknod: not found Begin: Loading essential drivers... ... /init: line 157: printf: not found Done. Begin: Running /scripts/init-premount ... ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] /scripts/init-premount/udev: line 14: cannot create /proc/sys/kernel/hotplug: nonexistent directory Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... Done. Begin: Waiting for root file system... ... Done. ALERT! does not exist. Dropping to a shell! Check your root= boot argument (cat /proc/cmdline) Check for missing modules (cat /proc/modules), or device files (ls /dev) BusyBox v1.9.2 (2008-03-24 08:42:17 UTC) built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off (initramfs) -- Package-specific info: selected information from lshal(1): /proc/cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 65 model name : Dual-Core AMD Opteron(tm) Processor 2220 stepping : 3 cpu MHz : 2792.998 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy bogomips : 5589.59 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 65 model name : Dual-Core AMD Opteron(tm) Processor 2220 stepping : 3 cpu MHz : 2792.998 cache size : 1024 KB physical id : 1 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy bogomips : 5586.10 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc processor : 2 vendor_id : AuthenticAMD cpu family : 15 model : 65 model name : Dual-Core AMD Opteron(tm) Processor 2220 stepping : 3 cpu MHz : 2792.998 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy bogomips : 5586.10 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc processor : 3 vendor_id : AuthenticAMD cpu family : 15 model : 65 model name : Dual-Core AMD Opteron(tm) Processor 2220 stepping : 3 cpu MHz : 2792.998 cache size : 1024 KB physical id : 1 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy bogomips : 5586.13 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.22-3-amd64 (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=fr_FR (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages kvm depends on: ii adduser 3.107 add and remove users and groups ii bridge-utils 1.4-1 Utilities for configuring the Linu ii iproute 20080108-1 Professional tools to control the ii libasound2 1.0.16-2 ALSA library ii libc6 2.7-10 GNU C Library: Shared libraries ii libgnutls13 2.0.4-3+b1 the GNU TLS library - runtime libr ii libsdl1.2debian 1.2.13-2 Simple DirectMedia Layer ii vgabios 0.6a-3 VGA BIOS software for the Bochs an ii zlib1g 1:1.2.3.3.dfsg-11 compression library - runtime Versions of packages kvm recommends: ii kvm-source 60+dfsg-1 Source for the KVM driver ii linux-image-2.6.22-2-amd 2.6.22-4 Linux 2.6.22 image on AMD64 ii linux-image-2.6.22-3-amd 2.6.22-6.lenny1 Linux 2.6.22 image on AMD64 ii linux-image-2.6.24-1-amd 2.6.24-5 Linux 2.6.24 image on AMD64 ii qemu 0.9.1-3 fast processor emulator ii vde2 2.2.0-pre2-1 Virtual Distributed Ethernet -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]