Package: postfix
Version: 2.3.8-2+b1
Severity: important
I just upgraded my Debian Sarge to Debian Etch. Before the upgrade my the end
of my /etc/postfix/master.cf looked like
"
smtp-amavis unix - - n - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_l\
ookups=yes
127.0.0.1:10025 inet n - n - - smtpd -o content_filter= -o local_recipient_maps\
= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restri\
ctions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_reci\
pient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict\
_rfc821_envelopes=yes -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=100\
1 -o smtpd_hard_error_limit=1000
"
(no newline at end of file)
The postfix upgrade asked if it should add a domain<something> to the
configuration, and I said yes. (dont know if this is relevant)
After the upgrade the end of master.cf looked like this:
127.0.0.1:10025 inet n - n - - smtpd -o content_filter= -o local_recipient_maps\
= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restri\
ctions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_reci\
pient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict\
_rfc821_envelopes=yes -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=100\
1 -o smtpd_hard_error_limit=1000tlsmgr unix - - - 1000?
1 tlsmgr
scache unix - - - - 1 scache
discard unix - - - - - discard
Where there obviously is a missing newline. Obviously the configuration did not
work.
Regards, Thue
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16.27
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages postfix depends on:
ii adduser 3.102 Add and remove users and groups
ii debconf [debconf-2.0] 1.5.11etch1 Debian configuration management sy
ii dpkg 1.13.25 package maintenance system for Deb
ii libc6 2.3.6.ds1-13etch5 GNU C Library: Shared libraries
ii libdb4.3 4.3.29-8 Berkeley v4.3 Database Libraries [
ii libsasl2-2 2.1.22.dfsg1-8 Authentication abstraction library
ii libssl0.9.8 0.9.8c-4etch1 SSL shared libraries
ii lsb-base 3.1-23.2etch1 Linux Standard Base 3.1 init scrip
ii netbase 4.29 Basic TCP/IP networking system
ii ssl-cert 1.0.14 Simple debconf wrapper for openssl
Versions of packages postfix recommends:
ii emacs21 [mail-re 21.4a+1-3etch1 The GNU Emacs editor
ii mailx [mail-read 1:8.1.2-0.20050715cvs-1 A simple mail user agent
ii mutt [mail-reade 1.5.13-1.1etch1 text-based mailreader supporting M
-- debconf information excluded
#
# Postfix master process configuration file. Each logical line
# describes how a Postfix daemon program should be run.
#
# A logical line starts with non-whitespace, non-comment text.
# Empty lines and whitespace-only lines are ignored, as are comment
# lines whose first non-whitespace character is a `#'.
# A line that starts with whitespace continues a logical line.
#
# The fields that make up each line are described below. A "-" field
# value requests that a default value be used for that field.
#
# Service: any name that is valid for the specified transport type
# (the next field). With INET transports, a service is specified as
# host:port. The host part (and colon) may be omitted. Either host
# or port may be given in symbolic form or in numeric form. Examples
# for the SMTP server: localhost:smtp receives mail via the loopback
# interface only; 10025 receives mail on port 10025.
#
# Transport type: "inet" for Internet sockets, "unix" for UNIX-domain
# sockets, "fifo" for named pipes.
#
# Private: whether or not access is restricted to the mail system.
# Default is private service. Internet (inet) sockets can't be private.
#
# Unprivileged: whether the service runs with root privileges or as
# the owner of the Postfix system (the owner name is controlled by the
# mail_owner configuration variable in the main.cf file). Only the
# pipe, virtual and local delivery daemons require privileges.
#
# Chroot: whether or not the service runs chrooted to the mail queue
# directory (pathname is controlled by the queue_directory configuration
# variable in the main.cf file). Presently, all Postfix daemons can run
# chrooted, except for the pipe, virtual and local delivery daemons.
# The proxymap server can run chrooted, but doing so defeats most of
# the purpose of having that service in the first place.
# The files in the examples/chroot-setup subdirectory describe how
# to set up a Postfix chroot environment for your type of machine.
#
# Wakeup time: automatically wake up the named service after the
# specified number of seconds. A ? at the end of the wakeup time
# field requests that wake up events be sent only to services that
# are actually being used. Specify 0 for no wakeup. Presently, only
# the pickup, queue manager and flush daemons need a wakeup timer.
#
# Max procs: the maximum number of processes that may execute this
# service simultaneously. Default is to use a globally configurable
# limit (the default_process_limit configuration parameter in main.cf).
# Specify 0 for no process count limit.
#
# Command + args: the command to be executed. The command name is
# relative to the Postfix program directory (pathname is controlled by
# the daemon_directory configuration variable). Adding one or more
# -v options turns on verbose logging for that service; adding a -D
# option enables symbolic debugging (see the debugger_command variable
# in the main.cf configuration file). See individual command man pages
# for specific command-line options, if any.
#
# General main.cf options can be overridden for specific services.
# To override one or more main.cf options, specify them as arguments
# below, preceding each option by "-o". There must be no whitespace
# in the option itself (separate multiple values for an option by
# commas).
#
# In order to use the "uucp" message tranport below, set up entries
# in the transport table.
#
# In order to use the "cyrus" message transport below, configure it
# in main.cf as the mailbox_transport.
#
# SPECIFY ONLY PROGRAMS THAT ARE WRITTEN TO RUN AS POSTFIX DAEMONS.
# ALL DAEMONS SPECIFIED HERE MUST SPEAK A POSTFIX-INTERNAL PROTOCOL.
#
# DO NOT SHARE THE POSTFIX QUEUE BETWEEN MULTIPLE POSTFIX INSTANCES.
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - - - - smtpd
#submission inet n - - - - smtpd
# -o smtpd_etrn_restrictions=reject
#628 inet n - - - - qmqpd
pickup fifo n - - 60 1 pickup
cleanup unix n - - - 0 cleanup
qmgr fifo n - - 300 1 qmgr
#qmgr fifo n - - 300 1 oqmgr
rewrite unix - - - - - trivial-rewrite
bounce unix - - - - 0 bounce
defer unix - - - - 0 bounce
trace unix - - - - 0 bounce
verify unix - - - - 1 verify
flush unix n - - 1000? 0 flush
proxymap unix - - n - - proxymap
smtp unix - - - - - smtp
relay unix - - - - - smtp
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - n - - lmtp
anvil unix - - n - 1 anvil
#
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# maildrop. See the Postfix MAILDROP_README file for details.
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -d -t$nexthop -f$sender
$recipient
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop}
${user} ${extension}
# only used by postfix-tls
#tlsmgr fifo - - n 300 1 tlsmgr
#smtps inet n - n - - smtpd -o
smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#587 inet n - n - - smtpd -o
smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes
smtp-amavis unix - - n - 2 smtp -o smtp_data_done_timeout=1200 -o
disable_dns_lookups=yes
127.0.0.1:10025 inet n - n - - smtpd -o content_filter= -o
local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o
smtpd_client_restrictions= -o smtpd_helo_restrictions= -o
smtpd_sender_restrictions= -o
smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8
-o strict_rfc821_envelopes=yes -o smtpd_error_sleep_time=0 -o
smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000#
# Postfix master process configuration file. Each logical line
# describes how a Postfix daemon program should be run.
#
# A logical line starts with non-whitespace, non-comment text.
# Empty lines and whitespace-only lines are ignored, as are comment
# lines whose first non-whitespace character is a `#'.
# A line that starts with whitespace continues a logical line.
#
# The fields that make up each line are described below. A "-" field
# value requests that a default value be used for that field.
#
# Service: any name that is valid for the specified transport type
# (the next field). With INET transports, a service is specified as
# host:port. The host part (and colon) may be omitted. Either host
# or port may be given in symbolic form or in numeric form. Examples
# for the SMTP server: localhost:smtp receives mail via the loopback
# interface only; 10025 receives mail on port 10025.
#
# Transport type: "inet" for Internet sockets, "unix" for UNIX-domain
# sockets, "fifo" for named pipes.
#
# Private: whether or not access is restricted to the mail system.
# Default is private service. Internet (inet) sockets can't be private.
#
# Unprivileged: whether the service runs with root privileges or as
# the owner of the Postfix system (the owner name is controlled by the
# mail_owner configuration variable in the main.cf file). Only the
# pipe, virtual and local delivery daemons require privileges.
#
# Chroot: whether or not the service runs chrooted to the mail queue
# directory (pathname is controlled by the queue_directory configuration
# variable in the main.cf file). Presently, all Postfix daemons can run
# chrooted, except for the pipe, virtual and local delivery daemons.
# The proxymap server can run chrooted, but doing so defeats most of
# the purpose of having that service in the first place.
# The files in the examples/chroot-setup subdirectory describe how
# to set up a Postfix chroot environment for your type of machine.
#
# Wakeup time: automatically wake up the named service after the
# specified number of seconds. A ? at the end of the wakeup time
# field requests that wake up events be sent only to services that
# are actually being used. Specify 0 for no wakeup. Presently, only
# the pickup, queue manager and flush daemons need a wakeup timer.
#
# Max procs: the maximum number of processes that may execute this
# service simultaneously. Default is to use a globally configurable
# limit (the default_process_limit configuration parameter in main.cf).
# Specify 0 for no process count limit.
#
# Command + args: the command to be executed. The command name is
# relative to the Postfix program directory (pathname is controlled by
# the daemon_directory configuration variable). Adding one or more
# -v options turns on verbose logging for that service; adding a -D
# option enables symbolic debugging (see the debugger_command variable
# in the main.cf configuration file). See individual command man pages
# for specific command-line options, if any.
#
# General main.cf options can be overridden for specific services.
# To override one or more main.cf options, specify them as arguments
# below, preceding each option by "-o". There must be no whitespace
# in the option itself (separate multiple values for an option by
# commas).
#
# In order to use the "uucp" message tranport below, set up entries
# in the transport table.
#
# In order to use the "cyrus" message transport below, configure it
# in main.cf as the mailbox_transport.
#
# SPECIFY ONLY PROGRAMS THAT ARE WRITTEN TO RUN AS POSTFIX DAEMONS.
# ALL DAEMONS SPECIFIED HERE MUST SPEAK A POSTFIX-INTERNAL PROTOCOL.
#
# DO NOT SHARE THE POSTFIX QUEUE BETWEEN MULTIPLE POSTFIX INSTANCES.
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - - - - smtpd
#submission inet n - - - - smtpd
# -o smtpd_etrn_restrictions=reject
#628 inet n - - - - qmqpd
pickup fifo n - - 60 1 pickup
cleanup unix n - - - 0 cleanup
qmgr fifo n - - 300 1 qmgr
#qmgr fifo n - - 300 1 oqmgr
rewrite unix - - - - - trivial-rewrite
bounce unix - - - - 0 bounce
defer unix - - - - 0 bounce
trace unix - - - - 0 bounce
verify unix - - - - 1 verify
flush unix n - - 1000? 0 flush
proxymap unix - - n - - proxymap
smtp unix - - - - - smtp
relay unix - - - - - smtp
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - n - - lmtp
anvil unix - - n - 1 anvil
#
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# maildrop. See the Postfix MAILDROP_README file for details.
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -d -t$nexthop -f$sender
$recipient
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop}
${user} ${extension}
# only used by postfix-tls
#tlsmgr fifo - - n 300 1 tlsmgr
#smtps inet n - n - - smtpd -o
smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#587 inet n - n - - smtpd -o
smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes
smtp-amavis unix - - n - 2 smtp -o smtp_data_done_timeout=1200 -o
disable_dns_lookups=yes
127.0.0.1:10025 inet n - n - - smtpd -o content_filter= -o
local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o
smtpd_client_restrictions= -o smtpd_helo_restrictions= -o
smtpd_sender_restrictions= -o
smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8
-o strict_rfc821_envelopes=yes -o smtpd_error_sleep_time=0 -o
smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000tlsmgr unix -
- - 1000? 1 tlsmgr
scache unix - - - - 1 scache
discard unix - - - - - discard
