Package: linux-image-2.6.22-3-486 Version: 2.6.22-6.lenny1 Followup-For: Bug #466525
There is no information about the bug in any of the logs on the computer. I made a photo of the screen before reboot and uploaded it to http://img241.imagevenue.com/img.php?image=72042_R0011983_122_492lo.JPG Otherwise too much to type and may be typematic errors. -- Package-specific info: ** Version: Linux version 2.6.22-3-486 (Debian 2.6.22-6.lenny1) ([EMAIL PROTECTED]) (gcc version 4.1.3 20071209 (prerelease) (Debian 4.1.2-18)) #1 Sun Feb 10 19:36:16 UTC 2008 ** Not tainted ** Kernel log: EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 6 EISA: Detected 0 cards. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 316k freed input: AT Translated Set 2 keyboard as /class/input/input0 via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:0d.0 to 64 eth0: VIA Rhine III (Management Adapter) at 0x1fc00, 00:0d:b9:0c:fa:cc, IRQ 11. eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 0021. SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub libata version 2.21 loaded. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD5536: IDE controller at PCI slot 0000:00:0f.2 AMD5536: chipset revision 1 AMD5536: not 100% native mode: will probe irqs later AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... usbcore: registered new device driver usb ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver hda: TRANSCEND, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 10 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:0f.4[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:0f.4 to 64 ohci_hcd 0000:00:0f.4: OHCI Host Controller ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0f.4: irq 10, io mem 0xefffe000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected hda: max request size: 128KiB hda: 7962192 sectors (4076 MB) w/1KiB Cache, CHS=7899/16/63, UDMA(33) hda: hda1 hda2 < hda5 > ACPI: PCI Interrupt 0000:00:0f.5[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:0f.5 to 64 ehci_hcd 0000:00:0f.5: EHCI Host Controller ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:0f.5: irq 10, io mem 0xefffd000 ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected usb 2-4: new high speed USB device using ehci_hcd and address 2 Attempting manual resume EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. usb 2-4: configuration #1 chosen from 1 choice kjournald starting. Commit interval 5 seconds EXT3-fs: hda1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 221458 EXT3-fs: hda1: 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:01.2[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 geode-aes: GEODE AES engine enabled. cs5535_gpio: base=0x6100 mask=0xb003c66 major=253 Real Time Clock Driver v1.12ac AMD Geode RNG detected input: PC Speaker as /class/input/input1 parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-pctv-400e-01.fw' usbcore: registered new interface driver dvb_usb_ttusb2 usb 2-4: USB disconnect, address 2 dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. Adding 224868k swap on /dev/hda5. Priority:-1 extents:1 across:224868k EXT3 FS on hda1, internal journal usb 2-4: new high speed USB device using ehci_hcd and address 3 usb 2-4: configuration #1 chosen from 1 choice dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Pinnacle 400e DVB-S USB2.0). DVB: registering frontend 0 (Philips TDA10086 DVB-S)... dvb-usb: Pinnacle 400e DVB-S USB2.0 successfully initialized and connected. loop: module loaded eth0: link up, 10Mbps, half-duplex, lpa 0x0021 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ACPI: AC Adapter [AC] (on-line) input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver eth0: no IPv6 routers present ** Loaded modules: Module Size Used by ppdev 8708 0 lp 10948 0 button 7952 0 ac 5252 0 battery 10116 0 ipv6 224932 16 loop 16260 0 lnbp21 2304 1 tda826x 3716 1 tda10086 9092 1 dvb_usb_ttusb2 7168 10 dvb_usb 19852 1 dvb_usb_ttusb2 dvb_core 73512 1 dvb_usb firmware_class 9472 1 dvb_usb dvb_pll 14212 1 dvb_usb parport_pc 33444 1 parport 32968 3 ppdev,lp,parport_pc i2c_core 23440 5 lnbp21,tda826x,tda10086,dvb_usb,dvb_pll psmouse 35728 0 pcspkr 2944 0 geode_rng 2432 0 serio_raw 6660 0 rtc 12568 0 cs5535_gpio 5108 0 geode_aes 6020 0 blkcipher 6020 1 geode_aes evdev 9472 0 ext3 118408 1 jbd 49832 1 ext3 ide_disk 16384 3 ehci_hcd 30476 0 ohci_hcd 19588 0 amd74xx 13596 0 [permanent] generic 4868 0 [permanent] ide_core 112040 3 ide_disk,amd74xx,generic ata_generic 7684 0 usbcore 123544 5 dvb_usb_ttusb2,dvb_usb,ehci_hcd,ohci_hcd libata 116208 1 ata_generic scsi_mod 136844 1 libata via_rhine 23176 0 mii 5376 1 via_rhine thermal 13448 0 processor 23984 1 thermal fan 4868 0 ** PCI devices: 00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 31) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248, Cache Line Size: 32 bytes Region 0: I/O ports at ac1c [size=4] Region 1: I/O ports at 9e00 [size=8] 00:01.1 VGA compatible controller [0300]: Advanced Micro Devices [AMD] Geode LX Video [1022:2081] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] Geode LX Video [1022:2081] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at efff0000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at effec000 (32-bit, non-prefetchable) [size=16K] Region 3: Memory at effe8000 (32-bit, non-prefetchable) [size=16K] Region 4: Memory at efff8000 (32-bit, non-prefetchable) [size=16K] 00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082] Subsystem: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at efff4000 (32-bit, non-prefetchable) [size=16K] Kernel driver in use: Geode LX AES Kernel modules: geode-rng, geode-aes 00:0d.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) Subsystem: VIA Technologies, Inc. Unknown device [1106:0106] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at fc00 [size=256] Region 1: Memory at effff000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: via-rhine Kernel modules: via-rhine 00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 6000 [size=8] Region 1: I/O ports at 6100 [size=256] Region 2: I/O ports at 6200 [size=64] Region 3: I/O ports at 1000 [size=32] Region 4: I/O ports at 9d00 [size=128] Region 5: I/O ports at 9c00 [size=64] Kernel modules: cs5535_gpio 00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master]) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248, Cache Line Size: 32 bytes Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at ff00 [size=16] Kernel driver in use: AMD_IDE Kernel modules: amd74xx 00:0f.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 10 Region 0: Memory at efffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:0f.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 10 Region 0: Memory at efffd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i586) Kernel: Linux 2.6.22-3-486 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.22-3-486 depends on: ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.22-3-486 recommends no packages. -- debconf information: linux-image-2.6.22-3-486/postinst/depmod-error-2.6.22-3-486: false shared/kernel-image/really-run-bootloader: true linux-image-2.6.22-3-486/preinst/abort-overwrite-2.6.22-3-486: linux-image-2.6.22-3-486/prerm/would-invalidate-boot-loader-2.6.22-3-486: true linux-image-2.6.22-3-486/prerm/removing-running-kernel-2.6.22-3-486: true linux-image-2.6.22-3-486/preinst/lilo-has-ramdisk: linux-image-2.6.22-3-486/postinst/old-system-map-link-2.6.22-3-486: true linux-image-2.6.22-3-486/preinst/bootloader-initrd-2.6.22-3-486: true linux-image-2.6.22-3-486/preinst/lilo-initrd-2.6.22-3-486: true linux-image-2.6.22-3-486/preinst/initrd-2.6.22-3-486: linux-image-2.6.22-3-486/postinst/bootloader-test-error-2.6.22-3-486: * linux-image-2.6.22-3-486/preinst/already-running-this-2.6.22-3-486: linux-image-2.6.22-3-486/postinst/old-initrd-link-2.6.22-3-486: true linux-image-2.6.22-3-486/preinst/elilo-initrd-2.6.22-3-486: true linux-image-2.6.22-3-486/postinst/old-dir-initrd-link-2.6.22-3-486: true linux-image-2.6.22-3-486/postinst/bootloader-error-2.6.22-3-486: linux-image-2.6.22-3-486/preinst/failed-to-move-modules-2.6.22-3-486: linux-image-2.6.22-3-486/preinst/abort-install-2.6.22-3-486: linux-image-2.6.22-3-486/preinst/overwriting-modules-2.6.22-3-486: true linux-image-2.6.22-3-486/postinst/create-kimage-link-2.6.22-3-486: true linux-image-2.6.22-3-486/postinst/kimage-is-a-directory: linux-image-2.6.22-3-486/postinst/depmod-error-initrd-2.6.22-3-486: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
