Package: hplip Version: 2.8.6-1 Severity: grave Justification: renders package unusable
Hi, Running hp-scan to use the scanner on my HP m1522nf aborts with the following traceback: Traceback (most recent call last): File "/usr/bin/hp-scan", line 857, in <module> from scan import sane File "/usr/share/hplip/scan/sane.py", line 57, in <module> import scanext ImportError: /var/lib/python-support/python2.5/scanext.so: undefined symbol: sane_read I know that the HP m1522nf is not officially supported, but I can scan from it using xsane okay. The output from hp-check below indicates a problem with the SCANEXT Python module. Cheers! -- Package-specific info: warning: Invalid ppd_dir value: None error: SIP not installed or version not found. note: For troubleshooting printing issues, it is best to have the CUPS 'LogLevel' note: set to 'debug'. To set the LogLevel to debug, edit the file /etc/cups/cupsd.conf (as root), note: and change the line near the top of the file that begins with 'LogLevel' to read: note: LogLevel debug note: Save the file and then restart CUPS (see your OS/distro docs on how to restart CUPS). note: Now, when you print, helpful debug information will be saved to the file: note: /var/log/cups/error_log note: You can monitor this file by running this command in a console/shell: note: tail -f /var/log/cups/error_log error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP. error: 'ppdev' kernel module not loaded. HP Linux Imaging and Printing System (ver. 2.8.6) Dependency/Version Check Utility ver. 14.0 Copyright (c) 2001-8 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Saving output in log file: hp-check.log Initializing. Please wait... --------------- | SYSTEM INFO | --------------- Basic system information: Linux cyclops 2.6.25.9-cyclops #1 SMP PREEMPT Mon Jun 30 15:26:22 NZST 2008 i686 GNU/Linux Distribution: debian unstable HPOJ running? No, HPOJ is not running (OK). Checking Python version... OK, version 2.5.2 installed Checking PyQt version... OK, version 3.17 installed. Checking SIP version... Checking for CUPS... Status: scheduler is running Version: 1.3.7 error_log is set to level: warn Checking for dbus/python-dbus... dbus daemon is running. python-dbus version: 0.82.4 ------------------------ | RUNTIME DEPENDENCIES | ------------------------ Checking for dependency: cups - Common Unix Printing System... OK, found. Checking for dependency: cups-ddk - CUPS driver development kit... OK, found. Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer... OK, found. Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)... OK, found. Checking for dependency: ppdev - Parallel port support kernel module.... Checking for dependency: PyQt - Qt interface for Python... OK, found. Checking for dependency: python-ctypes - A foreign function library for Python... OK, found. Checking for dependency: python-dbus - Python bindings for dbus... OK, found. Checking for dependency: Python 2.3 or greater - Required for fax functionality... OK, found. Checking for dependency: Reportlab - PDF library for Python... OK, found. Checking for dependency: SANE - Scanning library... OK, found. Checking for dependency: scanimage - Shell scanning program... OK, found. Checking for dependency: xsane - Graphical scanner frontend for SANE... OK, found. ---------------------- | HPLIP INSTALLATION | ---------------------- Currently installed HPLIP version... HPLIP 2.8.6 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=2.8.6 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hpijs/HP ppdbase=/usr/share/ppd/hpijs doc=/usr/share/doc/hplip-doc/HTML icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv # Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no foomatic-drv-install=yes foomatic-ppd-install=no foomatic-rip-hplip-install=no internal-tag=2.8.6.20 ------------------------------- | DISCOVERED PARALLEL DEVICES | ------------------------------- No devices found. -------------------------- | DISCOVERED USB DEVICES | -------------------------- No devices found. --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- fax --- Type: Fax Installed in HPLIP?: Yes, using the hpfax: CUPS backend. Device URI: hpfax:/net/HPerror: Incorrect PPD file for fax queue 'fax'. Fax queues must use 'HP-Fax-hplip.ppd'. warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP. error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.d/dll.conf). error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of scanext. error: 6 errors and/or warnings. _LaserJet_M1522nf_MFP?ip=10.1.0.18 PPD: /etc/cups/ppd/fax.ppd PPD Description: HP Fax 2 Printer status: printer fax is idle. enabled since Sun 13 Jul 2008 19:13:10 NZST Communication status: Good hp1522nf -------- Type: Printer Installed in HPLIP?: Yes, using the hp: CUPS backend. Device URI: hp:/net/HP_LaserJet_M1522nf_MFP?ip=10.1.0.18 PPD: /etc/cups/ppd/hp1522nf.ppd PPD Description: HP LaserJet m1522nf MFP Foomatic/hpijs, hpijs 2.8.6 Printer status: printer hp1522nf is idle. enabled since Sun 13 Jul 2008 19:13:02 NZST Communication status: Good HP4M ---- Type: Unknown Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend. Device URI: ///dev/null PPD: /etc/cups/ppd/HP4M.ppd PPD Description: HP LaserJet 4M Foomatic/Postscript (recommended) Printer status: printer HP4M is idle. enabled since Sun 13 Jul 2008 19:13:02 NZST m1522nf ------- Type: Unknown Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend. Device URI: ///dev/null PDFWriter --------- Type: Unknown Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend. Device URI: ///dev/null Plotter ------- Type: Unknown Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend. Device URI: ///dev/null ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in '/etc/sane.d/dll.conf'... Checking output of 'scanimage -L'... device `hpaio:/net/HP_LaserJet_M1522nf_MFP?ip=10.1.0.18' is a Hewlett-Packard HP_LaserJet_M1522nf_MFP all-in-one --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... OK, found. Checking 'pcardext' Photocard extension... OK, found. Checking 'hpmudext' I/O extension... OK, found. Checking 'scanext' SANE scanning extension... ----------------- | USB I/O SETUP | ----------------- Checking for permissions of USB attached printers... ----------- | SUMMARY | ----------- Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html Done. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.25.9-cyclops (SMP w/2 CPU cores; PREEMPT) Locale: LANG=en_NZ.UTF-8, LC_CTYPE=en_NZ.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages hplip depends on: ii adduser 3.108 add and remove users and groups ii coreutils 6.10-6 The GNU core utilities ii cups [cupsys] 1.3.7-8 Common UNIX Printing System(tm) - ii cupsys 1.3.7-8 Common UNIX Printing System (trans ii hplip-data 2.8.6-1 HP Linux Printing and Imaging - da ii libc6 2.7-12 GNU C Library: Shared libraries ii libcups2 1.3.7-8 Common UNIX Printing System(tm) - ii libdbus-1-3 1.2.1-2 simple interprocess messaging syst ii libsnmp15 5.4.1~dfsg-8.1 SNMP (Simple Network Management Pr ii libssl0.9.8 0.9.8g-10.1 SSL shared libraries ii libusb-0.1-4 2:0.1.12-12 userspace USB programming library ii lsb-base 3.2-13 Linux Standard Base 3.2 init scrip ii python 2.5.2-1 An interactive high-level object-o ii python-dbus 0.82.4-2 simple interprocess messaging syst ii python-imaging 1.1.6-3 Python Imaging Library ii python-support 0.8.4 automated rebuilding support for P Versions of packages hplip recommends: ii cups-client [cupsys-client 1.3.7-8 Common UNIX Printing System(tm) - ii cupsys-client 1.3.7-8 Common UNIX Printing System (trans ii hpijs 2.8.6+2.8.6-1 HP Linux Printing and Imaging - gs ii hpijs-ppds 2.8.6+2.8.6-1 HP Linux Printing and Imaging - HP ii hplip-gui 2.8.6-1 HP Linux Printing and Imaging - GU ii openprinting-ppds 20080211-2 OpenPrinting printer support - Pos -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]