Package: installation-report Version: 2.35 Severity: normal -- Package-specific info:
Boot method: network Image version: http://ftp.nl.debian.org/debian/dists/testing/main/installer-amd64/current/images/netboot/netboot.tar.gz 20080522 Date: 2008-07-24 Machine: Intel DG33FB motherboard, Core2Duo E8200, 2 x 500GB SATA WD Partitions: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0008c545 Device Boot Start End Blocks Id System /dev/sda1 * 1 2 16033+ fd Linux raid autodetect /dev/sda2 3 1218 9767520 fd Linux raid autodetect /dev/sda3 1219 1704 3903795 fd Linux raid autodetect /dev/sda4 1705 60801 474696652+ fd Linux raid autodetect /dev/sdb is formatted identically. Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [E] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [E] Install boot loader: [O] Overall install: [O] Comments/Problems: - I chose expert install. What's the difference with the normal install? I didn't really detect anything that was particularly "expert"... - After saying "no" to "do pc card services need to be started", I found it unexpected that I was asked for memory ranges to exclude for PCMCIA; I would have thought that the first question would mean I didn't need anything with PCMCIA. - It was impossible to setup the disk layout I wanted: - root on raid1 over 2 partitions - ditto swap and /boot - /var and other things on LVM on RAID1 I first setup the partitions as raid devices and chose "write to disk", and it complained about no root being assigned. I ended up first making one of the partitions not for raid but for root, and then after that went back and made root on an MD device. I could have sworn when I did something similar in March that it was no problem... Also, when setting usage of one of the raid devices to "LVM", that didn't get saved somehow, re-entering the partitioning showed "unused". Also the swap device (also on raid1) was shown as "swap", but when entering the config for that device it also said "not used". In short, most of the configuration entered was not remembered when "writing to disk". I made a couple of screenshots with my phone if you're interested. I ended up doing alt-f2 and setting things up by hand with mdadm and pvcreate et.al. - The question "should root be allowed to login" should indicate that this includes the console; I was thinking of ssh access. BTW, I think that offering to install an ssh server should also be asked, I expect that to always be there... which is a pain if you install the server somewhere and can't access it remotely. - After selecting the tasks I was hoping to be dumped into aptitude to fine-tune the packages; that didn't happen. Did I miss the choice for aptitude somewhere? I did choose "expert install", so I expect to be offered a bit more control... - I didn't get any chance to enter anything for the mail config, hence this is going out as from "[EMAIL PROTECTED]" while it should be just "[EMAIL PROTECTED]" for this system. I need to fix /etc/mailname... So please reply to [EMAIL PROTECTED] :-) - After installation cron in the log that /etc/environment doesn't exist, which it doesn't. - The rescue boot also asks for hostname, domainname, country, etc., so I was a bit worried that I was simply doing an install again. Why is that info necessary for a rescue console? -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to [EMAIL PROTECTED] ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="5.0 (lenny) - installer build 20080522" X_INSTALLATION_MEDIUM=netboot ============================================== Installer hardware-summary: ============================================== umame -a: Linux moordrecht 2.6.24-1-amd64 #1 SMP Sat May 10 09:28:10 UTC 2008 x86_64 unknown lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 02) lspci -knn: 00:03.0 Communication controller [0780]: Intel Corporation 82G33/G31/P35/P31 Express MEI Controller [8086:29c4] (rev 02) lspci -knn: 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC-2 Gigabit Network Connection [8086:294c] (rev 02) lspci -knn: Kernel driver in use: e1000e lspci -knn: Kernel modules: e1000e lspci -knn: 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: Kernel modules: ehci-hcd lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: Kernel modules: ehci-hcd lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IH (ICH9DH) LPC Interface Controller [8086:2912] (rev 02) lspci -knn: 00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02) lspci -knn: Kernel driver in use: ahci lspci -knn: Kernel modules: ahci lspci -knn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) lspci -knn: 02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b2) lspci -knn: Kernel driver in use: pata_marvell lspci -knn: Kernel modules: generic, pata_marvell lspci -knn: 06:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] lspci -knn: Kernel driver in use: firewire_ohci lspci -knn: Kernel modules: firewire-ohci lsmod: Module Size Used by lsmod: nls_iso8859_1 9600 4 lsmod: ufs 73736 0 lsmod: qnx4 16648 0 lsmod: ntfs 197216 0 lsmod: raid456 128544 0 lsmod: async_xor 7424 1 raid456 lsmod: async_memcpy 6528 1 raid456 lsmod: async_tx 7168 1 raid456 lsmod: xor 10128 2 raid456,async_xor lsmod: raid1 27648 4 lsmod: raid0 12032 0 lsmod: md_mod 84252 7 raid456,raid1,raid0 lsmod: dm_mod 67832 3 lsmod: xfs 495720 0 lsmod: reiserfs 224640 0 lsmod: jfs 169296 0 lsmod: ext3 139024 1 lsmod: jbd 55976 1 ext3 lsmod: vfat 17792 0 lsmod: fat 58032 1 vfat lsmod: ext2 75792 1 lsmod: mbcache 13952 2 ext3,ext2 lsmod: sd_mod 33408 10 lsmod: generic 9732 0 [permanent] lsmod: ide_core 144920 1 generic lsmod: ahci 34564 8 lsmod: pata_marvell 12416 0 lsmod: libata 162992 2 ahci,pata_marvell lsmod: firewire_sbp2 20496 0 lsmod: scsi_mod 169784 3 sd_mod,libata,firewire_sbp2 lsmod: usbhid 35040 0 lsmod: hid 41664 1 usbhid lsmod: vga16fb 16536 2 lsmod: vgastate 12288 1 vga16fb lsmod: fan 9736 0 lsmod: firewire_ohci 24064 0 lsmod: firewire_core 49216 2 firewire_sbp2,firewire_ohci lsmod: crc_itu_t 6528 1 firewire_core lsmod: uhci_hcd 29984 0 lsmod: ehci_hcd 39564 0 lsmod: e1000e 101284 0 lsmod: thermal 22560 0 lsmod: processor 44776 1 thermal df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 1990688 44 1990644 0% /dev df: tmpfs 1990688 44 1990644 0% /dev df: /dev/md2 9614052 1235556 8280824 13% /target df: /dev/md1 14931 9940 4832 67% /target/boot df: /dev/md2 9614052 1235556 8280824 13% /dev/.static/dev df: tmpfs 1990688 44 1990644 0% /target/dev free: total used free shared buffers free: Mem: 3981376 1325968 2655408 0 58828 free: Swap: 3903672 0 3903672 free: Total: 7885048 1325968 6559080 /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 6 /proc/cpuinfo: model : 23 /proc/cpuinfo: model name : Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz /proc/cpuinfo: stepping : 6 /proc/cpuinfo: cpu MHz : 2666.360 /proc/cpuinfo: cache size : 6144 KB /proc/cpuinfo: physical id : 0 /proc/cpuinfo: siblings : 2 /proc/cpuinfo: core id : 0 /proc/cpuinfo: cpu cores : 2 /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 10 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr sse4_1 lahf_lm /proc/cpuinfo: bogomips : 5336.51 /proc/cpuinfo: clflush size : 64 /proc/cpuinfo: cache_alignment : 64 /proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual /proc/cpuinfo: power management: /proc/cpuinfo: /proc/cpuinfo: processor : 1 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 6 /proc/cpuinfo: model : 23 /proc/cpuinfo: model name : Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz /proc/cpuinfo: stepping : 6 /proc/cpuinfo: cpu MHz : 2666.360 /proc/cpuinfo: cache size : 6144 KB /proc/cpuinfo: physical id : 0 /proc/cpuinfo: siblings : 2 /proc/cpuinfo: core id : 1 /proc/cpuinfo: cpu cores : 2 /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 10 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr sse4_1 lahf_lm /proc/cpuinfo: bogomips : 5332.71 /proc/cpuinfo: clflush size : 64 /proc/cpuinfo: cache_alignment : 64 /proc/cpuinfo: address sizes : 36 bits physical, 48 bits virtual /proc/cpuinfo: power management: /proc/cpuinfo: /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-006f : keyboard /proc/ioports: 0070-0077 : rtc /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 03c0-03df : vga+ /proc/ioports: 0400-047f : 0000:00:1f.0 /proc/ioports: 0400-047f : pnp 00:06 /proc/ioports: 0400-0403 : ACPI PM1a_EVT_BLK /proc/ioports: 0404-0405 : ACPI PM1a_CNT_BLK /proc/ioports: 0408-040b : ACPI PM_TMR /proc/ioports: 0410-0415 : ACPI CPU throttle /proc/ioports: 0420-042f : ACPI GPE0_BLK /proc/ioports: 0450-0450 : ACPI PM2_CNT_BLK /proc/ioports: 0500-053f : 0000:00:1f.0 /proc/ioports: 0500-053f : pnp 00:06 /proc/ioports: 0680-06ff : pnp 00:06 /proc/ioports: 0cf8-0cff : PCI conf1 /proc/ioports: 1000-1fff : PCI Bus #02 /proc/ioports: 1000-100f : 0000:02:00.0 /proc/ioports: 1000-100f : libata /proc/ioports: 1010-1017 : 0000:02:00.0 /proc/ioports: 1018-101f : 0000:02:00.0 /proc/ioports: 1018-101f : libata /proc/ioports: 1020-1023 : 0000:02:00.0 /proc/ioports: 1024-1027 : 0000:02:00.0 /proc/ioports: 1024-1027 : libata /proc/ioports: 2000-201f : 0000:00:1f.3 /proc/ioports: 2020-203f : 0000:00:1f.2 /proc/ioports: 2040-205f : 0000:00:1d.2 /proc/ioports: 2040-205f : uhci_hcd /proc/ioports: 2060-207f : 0000:00:1d.1 /proc/ioports: 2060-207f : uhci_hcd /proc/ioports: 2080-209f : 0000:00:1d.0 /proc/ioports: 2080-209f : uhci_hcd /proc/ioports: 20a0-20bf : 0000:00:1a.2 /proc/ioports: 20a0-20bf : uhci_hcd /proc/ioports: 20c0-20df : 0000:00:1a.1 /proc/ioports: 20c0-20df : uhci_hcd /proc/ioports: 20e0-20ff : 0000:00:1a.0 /proc/ioports: 20e0-20ff : uhci_hcd /proc/ioports: 2400-241f : 0000:00:19.0 /proc/ioports: 2400-241f : e1000e /proc/ioports: 2420-2427 : 0000:00:1f.2 /proc/ioports: 2428-242f : 0000:00:1f.2 /proc/ioports: 2430-2437 : 0000:00:02.0 /proc/ioports: 2438-243b : 0000:00:1f.2 /proc/ioports: 243c-243f : 0000:00:1f.2 /proc/iomem: 00000000-0009dfff : System RAM /proc/iomem: 0009e000-0009ffff : reserved /proc/iomem: 000c0000-000dffff : pnp 00:01 /proc/iomem: 000e0000-000fffff : reserved /proc/iomem: 00100000-de0b0fff : System RAM /proc/iomem: 00200000-00418084 : Kernel code /proc/iomem: 00418085-00513c5f : Kernel data /proc/iomem: 005a6000-006223e7 : Kernel bss /proc/iomem: de0b1000-de111fff : ACPI Non-volatile Storage /proc/iomem: de112000-df2c2fff : System RAM /proc/iomem: df2c3000-df2c4fff : reserved /proc/iomem: df2c5000-df387fff : System RAM /proc/iomem: df388000-df3e2fff : ACPI Non-volatile Storage /proc/iomem: df3e3000-df3e7fff : System RAM /proc/iomem: df3e8000-df3f2fff : ACPI Tables /proc/iomem: df3f3000-df3f3fff : System RAM /proc/iomem: df3f4000-df3fefff : ACPI Tables /proc/iomem: df3ff000-df3fffff : System RAM /proc/iomem: df400000-dfffffff : reserved /proc/iomem: e0000000-e7ffffff : 0000:00:02.0 /proc/iomem: e8000000-e80fffff : PCI Bus #06 /proc/iomem: e8000000-e8003fff : 0000:06:03.0 /proc/iomem: e8004000-e80047ff : 0000:06:03.0 /proc/iomem: e8004000-e80047ff : firewire_ohci /proc/iomem: e8100000-e81fffff : PCI Bus #02 /proc/iomem: e8100000-e81001ff : 0000:02:00.0 /proc/iomem: e8200000-e82fffff : 0000:00:02.0 /proc/iomem: e8300000-e837ffff : 0000:00:02.0 /proc/iomem: e8380000-e839ffff : 0000:00:19.0 /proc/iomem: e8380000-e839ffff : e1000e /proc/iomem: e83a0000-e83a0fff : 0000:00:19.0 /proc/iomem: e83a0000-e83a0fff : e1000e /proc/iomem: e83a1000-e83a17ff : 0000:00:1f.2 /proc/iomem: e83a1000-e83a17ff : ahci /proc/iomem: e83a1800-e83a1bff : 0000:00:1d.7 /proc/iomem: e83a1800-e83a1bff : ehci_hcd /proc/iomem: e83a1c00-e83a1fff : 0000:00:1a.7 /proc/iomem: e83a1c00-e83a1fff : ehci_hcd /proc/iomem: e83a2000-e83a20ff : 0000:00:1f.3 /proc/iomem: e83a2100-e83a210f : 0000:00:03.0 /proc/iomem: f0000000-f7ffffff : PCI MMCONFIG 0 /proc/iomem: f0000000-f7ffffff : reserved /proc/iomem: feb00000-feb03fff : pnp 00:01 /proc/iomem: fec00000-fec00fff : IOAPIC 0 /proc/iomem: fed13000-fed13fff : pnp 00:01 /proc/iomem: fed14000-fed17fff : pnp 00:01 /proc/iomem: fed18000-fed18fff : pnp 00:01 /proc/iomem: fed19000-fed19fff : pnp 00:01 /proc/iomem: fed1c000-fed1ffff : pnp 00:01 /proc/iomem: fed20000-fed3ffff : pnp 00:01 /proc/iomem: fed45000-fed99fff : pnp 00:01 /proc/iomem: fee00000-fee00fff : Local APIC /proc/iomem: fff00000-ffffffff : reserved /proc/iomem: 100000000-11bffffff : System RAM /proc/interrupts: CPU0 CPU1 /proc/interrupts: 0: 49 0 IO-APIC-edge timer /proc/interrupts: 1: 4237 4299 IO-APIC-edge i8042 /proc/interrupts: 8: 0 0 IO-APIC-edge rtc /proc/interrupts: 9: 0 0 IO-APIC-fasteoi acpi /proc/interrupts: 12: 1 2 IO-APIC-edge i8042 /proc/interrupts: 17: 1 1 IO-APIC-fasteoi uhci_hcd:usb3, ehci_hcd:usb7, libata /proc/interrupts: 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb1, uhci_hcd:usb6 /proc/interrupts: 19: 48 40 IO-APIC-fasteoi uhci_hcd:usb5, firewire_ohci /proc/interrupts: 21: 40 42 IO-APIC-fasteoi uhci_hcd:usb2 /proc/interrupts: 23: 0 0 IO-APIC-fasteoi uhci_hcd:usb4, ehci_hcd:usb8 /proc/interrupts: 1273: 2696159 2695578 PCI-MSI-edge ahci /proc/interrupts: 1274: 184914 185352 PCI-MSI-edge eth0 /proc/interrupts: NMI: 0 0 Non-maskable interrupts /proc/interrupts: LOC: 448897 333680 Local timer interrupts /proc/interrupts: RES: 10310 11179 Rescheduling interrupts /proc/interrupts: CAL: 1144 1260 function call interrupts /proc/interrupts: TLB: 999 947 TLB shootdowns /proc/interrupts: TRM: 0 0 Thermal event interrupts /proc/interrupts: THR: 0 0 Threshold APIC interrupts /proc/interrupts: SPU: 0 0 Spurious interrupts /proc/interrupts: ERR: 0 /proc/meminfo: MemTotal: 3981376 kB /proc/meminfo: MemFree: 2655200 kB /proc/meminfo: Buffers: 58828 kB /proc/meminfo: Cached: 1106760 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 219340 kB /proc/meminfo: Inactive: 959568 kB /proc/meminfo: SwapTotal: 3903672 kB /proc/meminfo: SwapFree: 3903672 kB /proc/meminfo: Dirty: 4852 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 9716 kB /proc/meminfo: Mapped: 2360 kB /proc/meminfo: Slab: 109584 kB /proc/meminfo: SReclaimable: 86560 kB /proc/meminfo: SUnreclaim: 23024 kB /proc/meminfo: PageTables: 572 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: CommitLimit: 5894360 kB /proc/meminfo: Committed_AS: 13308 kB /proc/meminfo: VmallocTotal: 34359738367 kB /proc/meminfo: VmallocUsed: 155864 kB /proc/meminfo: VmallocChunk: 34359582467 kB /proc/meminfo: HugePages_Total: 0 /proc/meminfo: HugePages_Free: 0 /proc/meminfo: HugePages_Rsvd: 0 /proc/meminfo: HugePages_Surp: 0 /proc/meminfo: Hugepagesize: 2048 kB /proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=0001 Version=0100 /proc/bus/input/devices: N: Name="Macintosh mouse button emulation" /proc/bus/input/devices: P: Phys= /proc/bus/input/devices: S: Sysfs=/class/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=mouse0 /proc/bus/input/devices: B: EV=7 /proc/bus/input/devices: B: KEY=70000 0 0 0 0 /proc/bus/input/devices: B: REL=3 /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 /proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard" /proc/bus/input/devices: P: Phys=isa0060/serio0/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input1 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0003 Vendor=046d Product=c312 Version=0110 /proc/bus/input/devices: N: Name="BTC USB Multimedia Keyboard" /proc/bus/input/devices: P: Phys=usb-0000:00:1a.1-1/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input2 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0003 Vendor=046d Product=c312 Version=0110 /proc/bus/input/devices: N: Name="BTC USB Multimedia Keyboard" /proc/bus/input/devices: P: Phys=usb-0000:00:1a.1-1/input1 /proc/bus/input/devices: S: Sysfs=/class/input/input3 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=13 /proc/bus/input/devices: B: KEY=2000000 387ad801d6a1 1e000000000000 0 /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.25-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash installation-report depends on no packages. Versions of packages installation-report recommends: ii pciutils 1:3.0.0-4 Linux PCI Utilities ii reportbug 3.43 reports bugs in the Debian distrib installation-report suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
