-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Package: installation-reports
Debian-installer-version: June 3rd 2005: http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/debian-testing-i386-netinst.iso uname -a: Linux psychotic 2.4.27-2-386 #1 Mon May 16 16:47:51 JST 2005 i686 GNU/Linux Date: Sat Jun 4 10:20:32 CEST 2005 Method: Used the netinst image, booted from it, configured it and installed from: deb ftp://ftp.belnet.be/debian/ unstable main deb-src ftp://ftp.belnet.be/debian/ unstable main Machine: Acer Aspire 1511 LMi laptop Processor: AMD Athlon64 3000+ Memory: 512 Mb, no swap partition added Root Device: ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA, hdb:pio hda: IC25N060ATMR04-0, ATA DISK drive hda: attached ide-disk driver. hda: 117210240 sectors (60012 MB) w/7884KiB Cache, CHS=7296/255/63, UDMA(100) Root Size/partition table: Disk /dev/hda: 60.0 GB, 60011642880 bytes 255 heads, 63 sectors/track, 7296 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 6020 48355618+ c W95 FAT32 (LBA) /dev/hda2 6021 7295 10241437+ 83 Linux /dev/hda3 7296 7296 8032+ 1e Hidden W95 FAT16 (LBA) Command (m for help): A partition for shared data with windows A reiser root filesystem An acer partition Output of lspci and lspci -n: psychotic:~# lspci 0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4) 0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6) 0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4) 0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) 0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) 0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2) 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2) 0000:00:06.1 Modem: nVidia Corporation: Unknown device 00d9 (rev a2) 0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) 0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2) 0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0348 (rev a1) 0000:02:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03) 0000:02:07.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controlle r (rev 02) 0000:02:07.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394 Controlle r 0000:02:08.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) psychotic:~# lspci -n 0000:00:00.0 0600: 10de:00d1 (rev a4) 0000:00:01.0 0601: 10de:00d0 (rev a6) 0000:00:01.1 0c05: 10de:00d4 (rev a4) 0000:00:02.0 0c03: 10de:00d7 (rev a5) 0000:00:02.1 0c03: 10de:00d7 (rev a5) 0000:00:02.2 0c03: 10de:00d8 (rev a2) 0000:00:06.0 0401: 10de:00da (rev a2) 0000:00:06.1 0703: 10de:00d9 (rev a2) 0000:00:08.0 0101: 10de:00d5 (rev a5) 0000:00:0a.0 0604: 10de:00dd (rev a2) 0000:00:0b.0 0604: 10de:00d2 (rev a4) 0000:00:18.0 0600: 1022:1100 0000:00:18.1 0600: 1022:1101 0000:00:18.2 0600: 1022:1102 0000:00:18.3 0600: 1022:1103 0000:01:00.0 0300: 10de:0348 (rev a1) 0000:02:06.0 0200: 14e4:169c (rev 03) 0000:02:07.0 0607: 104c:ac44 (rev 02) 0000:02:07.1 0c00: 104c:8029 0000:02:08.0 0280: 14e4:4320 (rev 03) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [OK] Configure network HW: [OK] Config network: [OK] (dhcp) Detect CD: [OK] Load installer modules: [OK] Detect hard drives: [OK] Partition hard drives: [OK] (why couldn't i specify the mount point for an existing fat32 ?) Create file systems: [OK] Mount partitions: [OK] Install base system: [OK] Install boot loader: [OK] Reboot: [OK] Comments/Problems: Installation went perfectly: Boot from CD. Regular boot. The machine was a Gentoo machine built for AMD64 arch, but now I decided to use it as a regular x86 Debian. - ---------------------------------------------------------------------- -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCoWVRzwVHEAxn05MRAtJjAJ9UDnHPnz89S9+Xv4+kl7waYipsQQCgkcTZ qOLAFM/CekXsZbVX+bopwWo= =AMqi -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]