On Thu, Jul 31, 2008 at 02:27:10AM -0400, Daniel Dickinson wrote: > On Wed, 16 Jul 2008 10:57:44 +0200 > maximilian attems <[EMAIL PROTECTED]> wrote: > > > On Tue, 15 Jul 2008, Daniel Dickinson wrote: > > > > > Package: linux-image-2.6.25-2-686 > > > Version: 2.6.25-6 > > > Followup-For: Bug #490903 > > > > > > > > > I just did a boot with the SCSI-2 scanner disconnected and 2.6.25-2 > > > boots sucessfully in that configuration with the megaraid. I > > > suspect it is the SCSI-2 scanner as a non-RAID device on channel 2 > > > that is confusing the megaraid_mbox driver. It worked with > > > 2.6.24-1 though, so it is still a regression, just not as serious > > > since it means I can't use my scanner, but can use my tape drive > > > and channel 1 raid array. > > > > > > The scanner is connected with adaptors and cable that allow the SE > > > SCSI-2 scanner to connect to the LVD Ultra-2 RAID controller (not > > > custom stuff though) (with the controller configured for SCSI-2 > > > Fast). > > > > > > > can you try out 2.6.26 see trunk apt lines > > -> http://wiki.debian.org/DebianKernel > > I tried the .26 kernel using the trunk apt shown with no luck. I still > panics on boot, even with the scanner disconnected. There appears to > be some difficulty with the interaction of the st tape driver and the > megraid_mbox driver (assuming the problem isn't the st tape driver > period, though I'd expect you'd already have more bug reports if that > was the case, and the panic output on the screen says that the problem > is in the megraid_mbox driver, though I can't see the entire panic > due to it being larger than a single screen).
could you please report upstream on bugzilla.kernel.org the debian kernel has no scsi specific patches. and let us know the upstream bug number. thanks -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]